Yarisworld Archive

Got rust in a stone chip on my hood...

11 posts · 7,409 views

firebird1999usOriginal postGeorgia · Jun 10, 2009#1
I bought some Langka a few months ago and plan on applying it, but am concerned about how to go about removing the small rust spot...it's maybe the size of a matchstick. I've got some 2000-2500 grit sandpaper at the house -- is this the best way to go about removing the rust?🤷

Replies 10

DarbPittsburgh, PA · Jun 10, 2009#2
You should be able to find a fiberglass pencil at any auto or electronics parts store. I need to do the same thing for a chip on my door. 😢
GooseOhio cornfields · Jun 10, 2009#3
Yep, I agree that a fiberglass pencil is the way to go. Using sandpaper will work, but you'll make the area needing attention bigger in the process.

If you can find it, 3M made a paint-pen filled with a rust converting "paint". The "paint" was pretty thin and dried to a glossy black finish. I used this under touch-ups and didn't have any long-term problems with the repairs.
firebird1999usThread starterGeorgia · Jun 11, 2009#4
Thanks for the advice on the fiberglass pencil👍

When you guys fill stone chips do you mix clear with the factory paint or apply it on top?

Does a 2009 yaris even have a clear coat?

😕
DerFlosserUSA · Jun 11, 2009#5
I don't think any cars use a single stage system anymore. I think it's all basecoat/clearcoat.
firebird1999usThread starterGeorgia · Jun 12, 2009#6
Originally Posted by DerFlosser ↑
I don't think any cars use a single stage system anymore. I think it's all basecoat/clearcoat.
So in other words just apply the base and then add clear, right? Does it matter what type of clear or is clearcoat clearcoat?
supmetSouthern California · Jun 12, 2009#7
I'm pretty sure the yaris doesn't have a clear coat. Just sand with the 2000 after painting and then do a nice wax job.
DarbPittsburgh, PA · Jun 12, 2009#8
Originally Posted by Goose ↑
Yep, I agree that a fiberglass pencil is the way to go. Using sandpaper will work, but you'll make the area needing attention bigger in the process.

If you can find it, 3M made a paint-pen filled with a rust converting "paint". The "paint" was pretty thin and dried to a glossy black finish. I used this under touch-ups and didn't have any long-term problems with the repairs.
Does this 3M "paint" have a rust neutralizer in it?
EDIT:

Seems 3M Rust Avenger has been discontinued... This blog has some other rust converting options listed. I think I'm going to try Loctite Extend.
GooseOhio cornfields · Jun 12, 2009#9
I believe Rust Avenger did have a neutralizer, although it has been a while.

Langka and other products like it (my dealer sold me a no-name equivalent) work pretty well. Once you get the hang of the Langka, you really won't need to do the separate basecoat/clearcoat process.

Don't overcomplicate the touchup process and you'll get pretty good results.
DarbPittsburgh, PA · Jun 12, 2009#10
Originally Posted by Goose ↑
I believe Rust Avenger did have a neutralizer, although it has been a while.

Langka and other products like it (my dealer sold me a no-name equivalent) work pretty well. Once you get the hang of the Langka, you really won't need to do the separate basecoat/clearcoat process.

Don't overcomplicate the touchup process and you'll get pretty good results.
Yeah, i think I just want to neutralize, paint it up, wet-sand, and wax.
RS07Montreal · Jun 18, 2009#11
CLR worked for me... After that just retouch with the pen.