kngrsllOriginal postSpartanburg, SC · Jun 7, 2009#1Can we get a wheel weight sticky? Or incorperate that into another thread? I found the stock weights for my MR-S wheels and my new wheels:
Stock Toyota MR-S wheels: 15.2 lbs Front (15x6.5 +45) and 14.6 lbs Rear (15x6 +45)
Team Dynamics 15x7 +25 13.2 lbs Each
Replies 24
scapeBeaufort, South Carolina · Jun 8, 2009#2out of curiousity, does having wider rims upfront change the handling any?
TamagoOff Grid · Jun 8, 2009#3 Originally Posted by
scape ↑ out of curiousity, does having wider rims upfront change the handling any?
i ran the same wheels as ken on my corolla, and did not notice a difference, since i had the same size tires front and rear.
kngrsllThread starterSpartanburg, SC · Jun 8, 2009#4 Originally Posted by
scape ↑ out of curiousity, does having wider rims upfront change the handling any?
that probably depends on who you ask. If you want to get super technical, then yeah, it probably has a MINOR influence on how the car drives. In reality, it is probably so small, you cant detect it. The reason i have seen offset wheels on a FWD car was to run a WIDER front tire usually (like a 205 or 225 Front, and a 195 Rear tire; in fact the very first type R's ran this set up alot in Japan.) So you can do that, and make up for it in spring rate, damper settings, so on.
So why did i do? Because i am a cheap bastard. I got the wheels from a friend for free (i'm actually still "borrowing" them.) They are super light for stock wheels, and they look factory, like it is a Yaris-R model or something, and i like that.
The tire size is the same on the front and rear, and so the influence that wheel width has on handling is gone. So it will drive the exact same if i had the same size around or not. So basically, i am running two sizes for no other reason than that these wheels were free to me. You can't even tell by driving it, or looking at it. These are great wheels, i have thought about finding another set actually. I was going to use the wider ones for track tires (15x6.5), and the smaller ones (15x6) for street tires.
TamagoOff Grid · Jun 8, 2009#5 Originally Posted by
kngrsll ↑ that probably depends on who you ask. If you want to get super technical, then yeah, it probably has a MINOR influence on how the car drives. In reality, it is probably so small, you cant detect it. The reason i have seen offset wheels on a FWD car was to run a WIDER front tire usually (like a 205 or 225 Front, and a 195 Rear tire; in fact the very first type R's ran this set up alot in Japan.) So you can do that, and make up for it in spring rate, damper settings, so on.
So why did i do? Because i am a cheap bastard. I got the wheels from a friend for free (i'm actually still "borrowing" them.) They are super light for stock wheels, and they look factory, like it is a Yaris-R model or something, and i like that.
The tire size is the same on the front and rear, and so the influence that wheel width has on handling is gone. So it will drive the exact same if i had the same size around or not. So basically, i am running two sizes for no other reason than that these wheels were free to me. You can't even tell by driving it, or looking at it. These are great wheels, i have thought about finding another set actually. I was going to use the wider ones for track tires (15x6.5), and the smaller ones (15x6) for street tires.
keep an eye out for the 16's ! remember in 2003 toyota went to a 16X6.5 iirc for the rear
kngrsllThread starterSpartanburg, SC · Jun 8, 2009#6 Originally Posted by
Tamago ↑ i ran the same wheels as ken on my corolla, and did not notice a difference, since i had the same size tires front and rear.
uh, what he said, in a few more words LOL
kngrsllThread starterSpartanburg, SC · Jun 8, 2009#7 Originally Posted by
Tamago ↑ keep an eye out for the 16's ! remember in 2003 toyota went to a 16X6.5 iirc for the rear
i think they would look really good for a street wheel. they weigh so little too!
scapeBeaufort, South Carolina · Jun 8, 2009#8i read that staggering the front to be wider is not a good idea regarding insurance and police- here in the states...too bad b/c it seems like a good idea
kngrsllThread starterSpartanburg, SC · Jun 8, 2009#9 Originally Posted by
scape ↑ i read that staggering the front to be wider is not a good idea regarding insurance and police- here in the states...too bad b/c it seems like a good idea
they would never notice. The tires are the same size, so you arent really staggering anymore.
scapeBeaufort, South Carolina · Jun 8, 2009#10i meant more of staggering the tires themselves, but your right the rims would be mostly unnoticeable
TamagoOff Grid · Jun 8, 2009#11staggering FTW!
Picture not included in this copy
scapeBeaufort, South Carolina · Jun 8, 2009#12ahh so it's common?
kngrsllThread starterSpartanburg, SC · Jun 8, 2009#13i dunno, those v-dub kids do crazy things
TamagoOff Grid · Jun 8, 2009#14that's a PURE autocross setup :D
285/30/18's front, 245/35/18's rear
MorganPCB, FL · Jun 8, 2009#15 Originally Posted by
Tamago ↑ keep an eye out for the 16's ! remember in 2003 toyota went to a 16X6.5 iirc for the rear
2nd gen spyders have the 15/16 stagger
TamagoOff Grid · Jun 8, 2009#16 Originally Posted by
Morgan ↑ 2nd gen spyders have the 15/16 stagger
ah, so 2002 :) my mistake
TamagoOff Grid · Jun 8, 2009#17on topic:
TR motorsports C1 15X8 +20, 13.5lbs
MorganPCB, FL · Jun 8, 2009#18 Originally Posted by
Tamago ↑ ah, so 2002 :) my mistake
and for the record they do fit staggered on a yaris with 205/40 🙂
kngrsllThread starterSpartanburg, SC · Jun 8, 2009#19 Originally Posted by
Morgan ↑ and for the record they do fit staggered on a yaris with 205/40 🙂
pics? they look great on my car, curious to see them. i think the way to go is get two sets, and split them for duty, track/street with some bolt on spacers.
MorganPCB, FL · Jun 8, 2009#20my bf had an 04 spyder with hankook rs2s and he let me borrow the wheels to see what I could squeeze under my fenders - never got pics before he traded the car in
supmetSouthern California · Jun 8, 2009#21http://www.wheelweights.net/ I parsed all that into excel and made it sortable and filterable(it wouldn't let me upload an xls, so I zipped it)
I also added links to pictures for some, and I put which ones I was pretty sure come in 4x100, but I'm not 100% sure on all of those.
1 attachment not included in this copy
xbalancemalaysia · Jun 9, 2009#22what tire maker produce the lowest weight? and have good performance
Nagoya_TRD.SoCal · Jun 9, 2009#23MorganPCB, FL · Jun 9, 2009#24 Originally Posted by
Nagoya_TRD. ↑
BLASPHEMY! haha jk, thanks for the info!
merryandlovelyUSA · Jun 10, 2009#25I think they would look really good for a street wheel. There weight so little too!