Yarisworld Archive

Bolt caps for spoiler

9 posts · 3,190 views

MadMaxOriginal postSan Antonio, Texas! · Jun 4, 2009#1
OK, I've got one of the Taiwanese OEM spoilers on my car (the kind Gary sells at Yaris Universe), but yesterday one of the little caps that covers the bolt holes fell off. It is a little 3/4" cap, and I picked up a metal one at Lowe's and spraypainted it, but the prongs on it are too long and it won't fit snugly.

I am willing to work on modding it to fit, but I was wondering if there is a better source for a replacement cap? I can spraypaint it myself, I used metallic black touch-up paint and the metal one came out fine; but I would prefer to find something that fits better...

Thanks in advance!

Cheers! M2

Replies 8

MadMaxThread starterSan Antonio, Texas! · Jun 5, 2009#2
No ideas or suggestions? Damn, am I gonna have to figure this out on my own?
KioshiFremont, CA · Jun 6, 2009#3
i f-ed up on my covers, but using the wrong screws, so my covers are tilted up at a 45 degree angle...3M tape has been holding them for almost 2 years now~

Use a dremel to trim it down, perhaps?
CreeperGeorgia · Jun 6, 2009#4
i used superglue
ShroomsterOrlando · Jun 6, 2009#5
Originally Posted by Creeper ↑
i used superglue
ditto.....also the 3m tape
cali yarisCanoga Park, CA · Jun 6, 2009#6
Ha, I lost one too! Made a cap out of that carbon fiber sheeting I sell.
severous01SE Texas · Jun 6, 2009#7
how about a file...or a grinder, or a dremel, or a set of dikes/wire cutters/angle cutters...

and of course, glue and tape always help.
MadMaxThread starterSan Antonio, Texas! · Jun 6, 2009#8
Well, I got some 3/4" metal end caps from Lowe's and spraypainted them using an modeling airbrush I have and some touch-up paint. They came out nicely but the tabs don't work, so I am going to have to use some adhesive. I thought about superglue but if I ever need to remove them it will be a mess. A lesser adhesive should work, I just haven't figured out what I am going to use just yet.

Oh, and epoxy didn't work!

Cheers! M2
PhaetonPort Angeles, Wa · Jun 6, 2009#9
use clear silicone, you can still get them off but not easily.