fujiOriginal postHonolulu · May 31, 2009#1Well, just finished the 1ZZ install without a hitch. No cel! The problem I saw when I installed the throttle body was the manifold has a opening which is too small and restricts the airflow. To really take advantage of the new throttle body, I think we need a newly designed intake manifold. Any thoughts??
In addition, what intake system are people using with the new throttle body? Perhaps something designed for the 1.8 liter TS or even a Matrix intake?
Replies 28
marcustoronto, canada · May 31, 2009#2yah someone had a prototype but i guess decided to cancel the project..*sigh* too bad.. 15-20 hp increase for under $700 sounds very reasonable.
AlexNet0Rockland, ME · May 31, 2009#3^yeah, but garm is picking it back up😁
To the OP, if you feel comfortable, you can port match the intake manifold, it just wont fit the stock TB with its gasket after you do this
cali yarisCanoga Park, CA · May 31, 2009#4It's picked up. DynaTek is interested, and I already have a backup fabricator if they fail to come through again. However, the intake manifold project was based on using a stock throttle body. If we limit it to throttle body swaps, it might mean not enough sales to do the manifolds. And I'm not doing a bunch of versions, so let that be known.
fujiThread starterHonolulu · May 31, 2009#5As long as the new intake manifold is made out of metal and it is thick enough, it can be bored out. This will avoid the strange 90 degree lip where the throttle body connects to the intake manifold. Even more gains!
As long as there is a will, we will find a way!
06silveryarisPuerto Rico · May 31, 2009#6i haven't looked at the manifold entrance but can't the plastic one be bored out?
gwasabiHonolulu, Hawaii · May 31, 2009#7I'm pretty sure the plastic one can be bored out. Use a dremel tool or something. I was actually thinking of doing this soon but i messed up my manifold so i'm looking for a stock manifold to buy. hahaha
frownonfunRGV, Texas · May 31, 2009#8 Originally Posted by
cali yaris ↑ It's picked up. DynaTek is interested, and I already have a backup fabricator if they fail to come through again. However, the intake manifold project was based on using a stock throttle body. If we limit it to throttle body swaps, it might mean not enough sales to do the manifolds. And I'm not doing a bunch of versions, so let that be known.
so stick with the stock throttle body is what you are saying? if we are interested in this manifold that is?
cali yarisCanoga Park, CA · May 31, 2009#9 Otherwise, it's just bottle necking the airflow.
People who have done the throttle body mod report more power. Port matching would do even more.
Frown, I'm not saying I won't do it, but it will be dependent on interest, how many people want to go the whole way with intake mani + larger TB.
DJPanenoSan Diego, CA · May 31, 2009#10I would be interested, already planning on swapping the throttle body as my next project. I don't know how much something like an intake manifold costs, but it sounds useful.
yarstarGeorgia · May 31, 2009#11I've swapped mine, Garm, but I'll go with whatever you produce and mod it if necessary.
Thanks for picking the ball back up on this. I think it will make significant gains.
cali yarisCanoga Park, CA · May 31, 2009#12The butt dyno IS subjective, that is true. But when someone like Jkuchta, whose racing and technical expertise surpasses my own, says it makes a difference, I'll take that as being true.
whooppee777Maryland · May 31, 2009#13GalavoxxSan Francisco · May 31, 2009#14Hey Garm, when can we expect to see the production pieces done assuming DynaTek does pick up the production for the intake? I'm not sure you mentioned this in the intake thread. I'll take whatever you make!!
cali yarisCanoga Park, CA · May 31, 2009#15I'm not sure, but I'm having a phone conversation with DynaTek again tomorrow.
fujiThread starterHonolulu · Jun 1, 2009#16An improved intake WITH the 1zz throttle body is going to make some awesome gains! I CANT WAIT!
GalavoxxSan Francisco · Jun 1, 2009#17 Originally Posted by
cali yaris ↑ I'm not sure, but I'm having a phone conversation with DynaTek again tomorrow.
Awesome.
SabretoothSt Cloud FL · Jun 1, 2009#18Garm, why dont you make the intake manifold bolt up for the 1zz TB, then sell it included with the kit, core pricing and all till the buyer sends back the old one. Or you could offer a simple adapter plate for those who wish to stick with the stock TB.
This way so the peeps that decide to go with the larger TB arent needing to bore out their new Intake manifold, and a simple bolt on plate would allow stock TB users the same use of the product.
If Morgan can use that "boating plastic material" (forgot the name) to make an adaptor plate for the TB from the Xb to Yaris, what says we couldnt do a choker plate for the stock TB?
cali yarisCanoga Park, CA · Jun 1, 2009#19^ All in good time. Good to know there is interest in a 1ZZ version. 👍
9vaporsNY · Jun 1, 2009#20I want one too.
jounabayamon puerto rico · Jun 1, 2009#21over in pr they make custom manifolds and its a good gain but they are too expensive
AlexNet0Rockland, ME · Jun 1, 2009#22^ can you find one and give us a price?
t0m4sPanama · Jun 2, 2009#23i want one
06silveryarisPuerto Rico · Jun 2, 2009#24a close freind of mine makes them for Honda with ITB and for old school turbo carburated engines( yeah we still use those here to go 7 sec down the quartermile). 🙂 I will be buying a stock intake manifold and boring it to fit the Matrix/corolla tb.
fujiThread starterHonolulu · Jun 3, 2009#25Would it be better to make an adapter instead? This way incase you want to go back to the original throttle body it will not be an issue. I think Alexnet0 was in the process of developing a throttle body spacer.
cali yarisCanoga Park, CA · Jun 3, 2009#26^ still is, along with Nexus
yaris-meAnaheim, CA · Jun 3, 2009#27 Originally Posted by
whooppee777 ↑
Thirty-nine is correct. He is talking vacuum not pressure.
KioshiFremont, CA · Jun 3, 2009#28Interested if gains are equivalent to pricing as well as using alternate throttle body, but if there is more demand from stock throttle body users, i can jump on that bandwagon as well~
PHXDEMONPhoenix, AZ · Jun 4, 2009#29I'll take one for the stock TB. Had way too many issues with the 1zz TB to put it back on while my car is a DD.