Yarisworld Archive

Still trying to get a power wire through firewall..

23 posts · 18,369 views

ezhacker1Original postSan Francisco · May 27, 2009#1
Iv searched and searched on the forums here, best "nipple" i see that is easy to get to is the one above ecu on passenger side but i want to have my power wire as short as possible to amp, so either going pass the drivers side which i still cant find a nipple to get through or under the car. Any helps?

Replies 22

CTScottUSA, CT · May 27, 2009#2
Originally Posted by ezhacker1 ↑
Iv searched and searched on the forums here, best "nipple" i see that is easy to get to is the one above ecu on passenger side but i want to have my power wire as short as possible to amp, so either going pass the drivers side which i still cant find a nipple to get through or under the car. Any helps?

There's a huge bushing on the drivers side where a large harness goes through:


Picture not included in this copy
ezhacker1Thread starterSan Francisco · May 27, 2009#3
Originally Posted by echo_hrs ↑
If you follow the main harness in the engine compartment, it goes through a huge rubber grommet on the driver's side that has extra nipples...I taped my 8 gauge wire to a hangar and poked it through there...

Cheers
yeah thats the thing i just couldnt find, or anything. Compared to my 98 taco, this is crazy...
TinyGiantRochester, NH · May 28, 2009#4
iwent through my fender and in threw where there was a hole next to the fuse box. i think i have a picture somewhere i'll post it up.. havent had any issues and it isnt near any moving parts that could cut/kink it
TinyGiantRochester, NH · May 28, 2009#5
if i remember right i put it threw and into that big grommet from the door electronics. and just ran it thought there.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
thebarberGrand Rapids, MI · May 28, 2009#6
to get at the nipple on the drivers side, you have to take apart the wipers and the tray there...thats what i had to do to install the power wires for my fogs....kind of a pita, but worth the effort...
ezhacker1Thread starterSan Francisco · May 28, 2009#7
Originally Posted by TinyGiant ↑
if i remember right i put it threw and into that big grommet from the door electronics. and just ran it thought there.

Picture not included in this copy
Picture not included in this copy
that helped extremely!!! i gave up trying to go through the firewall, even tho i was 90% done with removing wiper and tray.

go through the door grommet outputted it right next to the door sill cover excellent. thanks a bunch.
pariahdecssMassachusetts · Jun 1, 2009#8
I think talnlnky and others have alluded to this in other posts, but running power through the fender (grommet or not) is a really bad idea. Any location that exposes the wire to unnecessary chafing or weather is asking for trouble - electrical shorts / fire/ general electronics mayhem. Not trying to be a jerk just trying to save you some grief

There are firewall grommets on both the passenger and driver's side that fit the bill. I ran 4 gauge through the driver's side grommet that CTScott has in the pic
severous01SE Texas · Jun 1, 2009#9
i agree with pariah.....bad idea. plus you look like you have no idea what you're doing when people see that kind of wiring...sure it works and it will for a while....but it just looks really bad. i make fun of honda guys for doin that kinda stuff...
ezhacker1Thread starterSan Francisco · Jun 2, 2009#10
really now... ill have to re-look. I didnt think it would be a problem.
IsLNdbOiLas Vegas, NV · Jun 2, 2009#11
Originally Posted by echo_hrs ↑
If you follow the main harness in the engine compartment, it goes through a huge rubber grommet on the driver's side that has extra nipples...I taped my 8 gauge wire to a hangar and poked it through there...

Cheers

When I installed my electrochromatic rear-view mirror, it took me hours to get the harness for the temperature probe through that grommet. I taped the wire for the harness to a wire hanger and after a couple of hours of trying and multiple holes punctured through the grommet, I finally got it through.

I also managed to crack a piece of that plastic in the engine bay that covers the wires coming into that grommet.

I hope others have better luck than me getting through that thing!
pariahdecssMassachusetts · Jun 2, 2009#12
I pulled the battery out to make access to the driver side grommet a little easier, it was tight but did not take all that long. I also upgraded the battery ground to chassis cable so it made sense to pull the battery anyway.
LtNoogieWest Hills, CA · Jun 2, 2009#13
I paid a stereo installer $40 to drill a hole through the firewall under the dash and put a 1/2" grommetted hole there. I am able to run two 4gauge power wires, and three sets of wires for gauges.

It was a very easy $40 to part with considering how fast he got it done and how I had no clue how to do it safely.
Sodium DuckWestern Mass. · Jun 2, 2009#14
Originally Posted by LtNoogie ↑
...drill a hole through the firewall under the dash and put a 1/2" grommetted hole there.
👏👏

That's what I'll be doing when I have to start running all my power wires. I don't get why everyone is torturing themselves trying to find ways to run wires. Pick a spot where you want the wire to go and punch a hole in it (as long as you know what's on the other side!)
TinyGiantRochester, NH · Jun 13, 2009#16
i was cleaning the yaris yesterday and felt ambitious enough to rerun the power cable through that huge mother grommet. took FOREVER to get it though the nipple that is there.. but eventually i got it through :)
TinyGiantRochester, NH · Jun 13, 2009#17
i dont think there would have been a problem at all.. Just felt like messing around with it :)
dccurrentNYC · Jun 14, 2009#18
Originally Posted by LtNoogie ↑
I paid a stereo installer $40 to drill a hole through the firewall under the dash and put a 1/2" grommetted hole there. I am able to run two 4gauge power wires, and three sets of wires for gauges.

It was a very easy $40 to part with considering how fast he got it done and how I had no clue how to do it safely.
Damn man for like 50 bucks you could have gotten a sub and amp installed as well. 40 bucks sounds steep for just a hole but if you're happy then by all means.
altima35pwrHamilton, ON · Sep 7, 2009#19
just put an amp in my gf's yaris and i used a nipple located on the passenger side of the car. If you pull off some of the carpet underneath the glove box you'll see it. You can easily feed the cable through and then just zip tie it to diff parts under the hood so it doesn't get tangled up in anything and looks clean.
SlickHouston, Texas · Sep 7, 2009#20
Thats what I did. I ran a 8 guage the first time, then came back later and ran a 4 through the same grommet. It fit like a dream.
othaterSoCal, SanGabriel · Oct 22, 2011#21
Originally Posted by CTScott ↑
There's a huge bushing on the drivers side where a large harness goes through:


Picture not included in this copy
I know this is a old post but I'm sure someone might be looking for a location in the firewall like I did.

This is the bushing I used, Thanks CTScott, worked perfect. 🙇

I used a fiberglass rodder and pushed it through slowly on the outer portion of the bushing,
tied on the power cable, wiped some car wash soap on it and it slid right in. 👍
fnkngrvIn The Hotbox · Dec 22, 2015#22
If I can I will share a photo or two of mine. Could be the weekend though until I can.

Sent from my XT1575 using Tapatalk
fnkngrvIn The Hotbox · Dec 26, 2015#23
Here are a couple pics of the factory grommet holes on the passenger side.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Sent from my XT1575 using Tapatalk