Yarisworld Archive

Camcon ??? Will it work ???

6 posts · 5,474 views

blacksandiegovitzOriginal postJust chillin' out brah ! · May 25, 2009#1
Hey all,
Found a used camcon for a pretty good deal , but I'm still weary about buying it , installing it , paying for dyno tuning time only to get minimal gains (like 1-2 hp) or have it over ridden by the ecu after a couple of weeks . I've serched and only found a few posts on Yw about the Camcon and none of them were conculsive . I have the basic modds aem ,header , nitto mid-pipe and hks axle back and the car is running rich as hell , so i'm really just trying to pull out some fuel and advance the timing. As far as I know nobody has successfully ran a afc or camcon on their yaris yet . What do everybody think ???
http://www.powerenterpriseusa.net/pr...con/camcon.htm

Replies 5

battleversiontc808 · May 25, 2009#2
ive seen em on 1st gen xbs and they only made like 5hp more when tuned correctly and havent heard of the ecu overriding cause alot of tc owners and xb owner i hang around with havent had any problems yet
sujonol78Indonesia · Dec 8, 2009#3
hi there
I am using APEXi Neo ( for AFR ) and Camcon ( for Timing ) in the same time.
in my opinion it worths the price and effort. my standard 1nz-fe with only Apexi Neo, TRD Clutch & Clutch cover, and custom muffler & piping can go up to 173Nm ( 4500 RPM ) and 132BHP ( 6000 RPM ), while the factory stock is only around 109 BHP.
i haven't done the dyno again with the Camcon installed, but it definitely increases the performance and response a lot.

it's by far a good combination and easy to use.

cheers
PETERPOOPOahu · Dec 8, 2009#4
don't trust the butt dyno!
blacksandiegovitzThread starterJust chillin' out brah ! · Dec 8, 2009#5
Originally Posted by sujonol78 ↑
hi there
I am using APEXi Neo ( for AFR ) and Camcon ( for Timing ) in the same time.
in my opinion it worths the price and effort. my standard 1nz-fe with only Apexi Neo, TRD Clutch & Clutch cover, and custom muffler & piping can go up to 173Nm ( 4500 RPM ) and 132BHP ( 6000 RPM ), while the factory stock is only around 109 BHP.
i haven't done the dyno again with the Camcon installed, but it definitely increases the performance and response a lot.

it's by far a good combination and easy to use.

cheers

What year yaris is the apexi neo installed in ???
sujonol78Indonesia · Dec 8, 2009#6
mine is 2005 model with manual transmision