Hey guys, i got a 1.3 2SZ-FE Yaris 2005, i bought a whole 1NZ-FE engine to do a swap and put an turbo on it. Now im lookin for parts to get a longer life to the engine but i cant find that much... i will be happy if u got some links of parts, turbo kits or usefull ideas/tips for me... Thank u! Also u can mail on: minesskyline2004@yahoo.de
1NZ-FE Turbo need help
20 posts · 9,997 views
Replies 19
http://www.scionlife.com/forums/view...4ea4a0a5d88202
http://www.raceprecision.com/forums/viewtopic.php?t=51
http://www.raceeng.com/p-9620-crwr-b...1nzfe-set.aspx
Link to a thread or page that is not in the archive
http://www.clubxb.com/forums/f28/1nz...uild-8826.html
http://cgi.ebay.com/ebaymotors/CP-Pi...91210005r21046
http://www.raceprecision.com/forums/viewtopic.php?t=51
http://www.raceeng.com/p-9620-crwr-b...1nzfe-set.aspx
Link to a thread or page that is not in the archive
http://www.clubxb.com/forums/f28/1nz...uild-8826.html
http://cgi.ebay.com/ebaymotors/CP-Pi...91210005r21046
Thanks for that!
Where can i get a good header?
Header or turbo manifold?
Sorry, yes i mean turbo manifold... Kind Regards
2 different sites for the same manifold
http://www.whyindustries.com/store/p...products_id=55
http://www.365motorwerks.com/turbomanifolds.aspx
http://www.whyindustries.com/store/p...products_id=55
http://www.365motorwerks.com/turbomanifolds.aspx
OK, first you have to focus your search not on yaris parts but on Scion xB (first generation) parts.
The 1st generation xB on the US has the 1NZ engine but with the same configuration as the 1NZ from your car. The exhaust line up is the same.. throttle body position...
And... there are a few options / kits / manifolds out there for that car... as there are many turbo'ed xB's in the US.
Do a search.
A good place to look around is on scionlife.com
The 1st generation xB on the US has the 1NZ engine but with the same configuration as the 1NZ from your car. The exhaust line up is the same.. throttle body position...
And... there are a few options / kits / manifolds out there for that car... as there are many turbo'ed xB's in the US.
Do a search.
A good place to look around is on scionlife.com
Thanks, but these manifolds are they them i dont want :( do u know some with longer pipes? Like from YarisWrc on his cardomain site?
Kind Regards
Kind Regards
I know that the scion got the same engine but my problem is that im a german and i know a lot of sites in germany but them all got only bodyparts for the yaris and only engine stuff for vw, bmw.... so i need to know some serious shops of outside of germany which have something for the yaris and maybee not locatet in japan because the shipping from there is to expensive :(
do a 1.4L d4d diesel swap. you'll make more power and torque than a 1nz lol
? 😕🤷
You won't find a long tube manifold for the Yaris. Any of those that you might have seem must have been custome made.
All the manifolds that I have seen for the 1nz are short due to the limited spaced behind the engine.
http://cgi.ebay.com/REV-HARD-Cast-Tu...3A1%7C294%3A50
http://cgi.ebay.com/03-06-SCION-XB-X...3A1%7C294%3A50
All the manifolds that I have seen for the 1nz are short due to the limited spaced behind the engine.
http://cgi.ebay.com/REV-HARD-Cast-Tu...3A1%7C294%3A50
http://cgi.ebay.com/03-06-SCION-XB-X...3A1%7C294%3A50
Not exactly...
In my research I have found two types of Turbo manifolds for the Yaris, either the traditional "log" style, or the tube style...
Only 1 place that I know of makes a tube style, and it should work better for the older gen Vitz over our newer ones. Although the car that had it used had to remove the power steering.
http://www.turbinetech.ca/produit_de...ac096c&lang=AN
Oh and I opt this be moved to the Forced Induction section
In my research I have found two types of Turbo manifolds for the Yaris, either the traditional "log" style, or the tube style...
Only 1 place that I know of makes a tube style, and it should work better for the older gen Vitz over our newer ones. Although the car that had it used had to remove the power steering.
http://www.turbinetech.ca/produit_de...ac096c&lang=AN
Oh and I opt this be moved to the Forced Induction section
don't forget RevHard cast manifolds
Although the car that had it used had to remove the power steering.Yeah, but we have electronic p/s so that is not an issue for us.
http://www.turbinetech.ca/produit_de...ac096c&lang=AN
So what u think about to buy a whole turbo kit and maybee replace the manifold or buy everything in pices? And what u think about the two kits from ebay if u search for 1-nzfe turbo? I cant do a link in here because i moved and im online by phone...
There are quite few threads that already cover this.
Basically PLEASE BUY A KIT so the rest of us can see if it works.
Basically PLEASE BUY A KIT so the rest of us can see if it works.
can 1 swap my 1SZ-FE setup to 1NZ-FE setup without any alters or mods ??Originally Posted by we-to-11 ↑Hey guys, i got a 1.3 2SZ-FE Yaris 2005, i bought a whole 1NZ-FE engine to do a swap and put an turbo on it. Now im lookin for parts to get a longer life to the engine but i cant find that much... i will be happy if u got some links of parts, turbo kits or usefull ideas/tips for me... Thank u! Also u can mail on: minesskyline2004@yahoo.de
i currently have a M/T & i m planning the 1NZ-FE also with a M/T
its a 1st gen JDM VITZ 1.0 M/T
any help please ?
I were watching the space in my Echo and has space to put a turbo manifold like you want on it, but I don't know if the Yaris has the same space. I'll take time to build one, to see if can be placed into a Yaris.Originally Posted by we-to-11 ↑Thanks, but these manifolds are they them i dont want :( do u know some with longer pipes? Like from YarisWrc on his cardomain site?
Kind Regards