Yarisworld Archive

sedan lip on a liftback?

10 posts · 3,792 views

LBjoeOriginal postKCMO · May 20, 2009#1
Has anyone tried putting the black little front lip that goes under the front bumper of sedan yaris on a liftback?

Replies 9

MadMaxSan Antonio, Texas! · May 20, 2009#2
Ya mean something like this?

Picture not included in this copy

Picture not included in this copy

Except the dealer wanted $699 for it! 😲

Picture not included in this copy

Cheers! M2
yaris 2szgreece · May 20, 2009#3
the friend askes for the front...
staticorexcivilwar town. · May 20, 2009#4
Ha. Yeah you mean the little one inch tall, three-ish foot long black rubber liner to protect the bumper from bottoming out? All you should have to do is measure the legnth. If it's longer just cut it down. It bolts on simply.

Or you mean the actual body kit lip that comes with the s model. Which I don't think would work without much modding and $$.
LBjoeThread starterKCMO · May 20, 2009#5
yup just that little inch tall lip is all i want, ive looked under the sedans they have quite a few bolts holding them on.. figured if i could get a few to line up it may work. just a little detail i think would bring the bubble front end of my car down some. havent had a chance to look at one in the air yet though.
zuberioMississauga, ON · May 20, 2009#6
I took that thing off and threw it away. It kept scraping the ground and getting pulled partially off.
MadMaxSan Antonio, Texas! · May 20, 2009#7
Originally Posted by yaris 2sz ↑
the friend askes for the front...
Whoop! My bad!
Kaotic LazagnaCentral Valley, CA · May 22, 2009#8
Can you show a picture of what you are talking about?
QmobileHoytville, ohio · May 24, 2009#9
Originally Posted by Kaotic Lazagna ↑
Can you show a picture of what you are talking about?

+1
JochenGullegem - Belgium · May 24, 2009#10
Do you mean this black lip like mine? If so, why get one from a sedan if it exists for a hatchback? 😉
Mine was standard on it.

Picture not included in this copy