Yarisworld Archive

Why my HID's are flickering???

15 posts · 4,986 views

Yaris_PROriginal postPuerto Rico · May 19, 2009#1
I'm trying to install my HID's on Depo Proyectors. I follow some DIY here on the page and I didn't find any DRL Module. When I turn on the lights they start flickering. Some guys had the problem before but they don't wrote how they fix it. Any help please???🙁

Replies 14

BrianRiverside, CA · May 19, 2009#2
xenon vision sells something to solve the flickering problem I think.
taKutoToronto · May 19, 2009#3
like a relay harness?
BrianRiverside, CA · May 19, 2009#4
I think so. It connects directly to the battery. I saw it when I was ordering my kit.
marcustoronto, canada · May 19, 2009#5
flickering due to day time running light.. u have to use a relay and direct connect to battery instead..hid needs 12v not 10..
rla_yarisct · May 20, 2009#6
purchase a flicker relay
battleversiontc808 · May 20, 2009#7
or just disable the daytime running lights lol
schleppyBoston, MA · May 20, 2009#8
Disable your DRLs. Take the steering column cover off (3 screws) and read the how-to's again. It's very easy to do. Took me 5 minutes.
IllusionXBrossard, QC · May 20, 2009#9
Originally Posted by marcus ↑
flickering due to day time running light.. u have to use a relay and direct connect to battery instead..hid needs 12v not 10..
FYI, toyota DRL runs on 12v, with a current (amperage) limiter.


to OP: you need one of these.
http://shop.ebay.ca/?_from=R40&_trks...All-Categories
marcustoronto, canada · May 20, 2009#10
Originally Posted by IllusionX ↑
FYI, toyota DRL runs on 12v, with a current (amperage) limiter.


to OP: you need one of these.
http://shop.ebay.ca/?_from=R40&_trks...All-Categories
sorry bro i checked the voltage on drl its around 10v only if i turn the headlights on then its around 12v even 14v if the engine is running. voltmeter could be wrong though.
Yaris_PRThread starterPuerto Rico · May 20, 2009#11
Yaris here on Puerto Rico doesn't have DRL. However I check were is supposed to be and there's nothing.
PHXDEMONPhoenix, AZ · May 20, 2009#12
Your power for the HID is tapped directly into the battery right?
IllusionXBrossard, QC · May 20, 2009#13
Originally Posted by marcus ↑
sorry bro i checked the voltage on drl its around 10v only if i turn the headlights on then its around 12v even 14v if the engine is running. voltmeter could be wrong though.
If you did it on the yaris, then you are PROBABLY right. It wasn't the case when i had the echo.

I took no chance, and installed my HID with a relay right away on the yaris.
Yaris_PRThread starterPuerto Rico · May 20, 2009#14
Well I'm going to buy that HID relay kit to avoid any problems...thanks everyone
RagnaCaTVillalba, Puerto Rico · May 20, 2009#15
Wow strange I installed mine no problems and I installed 2 kits Headlights and fogs