Also, does anyone know the function of the other 2 wiring plugs hidden under the ebrake in the 08 Yaris, besides the aux plug? I'm pretty sure one is for the power locks, but not sure about the other.
Auxiliary Input Help
82 posts · 138,614 views · page 2 of 2
Replies continued
I don't have the EWD's for the Scion, so unfortunately I can't help you there.Originally Posted by ozmdd ↑CTScott - I think this thread has me almost squared away...one question: I have an 08 Scion Pioneer HU (not the premium, but the TC Pioneer unit, (T1801, I think), and have the aux issue with my 08 LB Yaris. What pins do i need to resistor/jumper on that unit? I've heard 14 and 19 for the premium Scion HU, and 18/19 for the Toyota HU. Thx.
Since you have a M/T, the other is for the lighting for the A/T.Originally Posted by ozmdd ↑Also, does anyone know the function of the other 2 wiring plugs hidden under the ebrake in the 08 Yaris, besides the aux plug? I'm pretty sure one is for the power locks, but not sure about the other.
Gracias. I'll just look at the scionlife website and see if I can't decipher the pinouts based on what you've shown here.
Post a link when you find it and I'll take a look.Originally Posted by ozmdd ↑Gracias. I'll just look at the scionlife website and see if I can't decipher the pinouts based on what you've shown here.
My dealership parts dept friends can't seem to get a handle on D79 8 pin connector as the part number is invalid. Also, when I looked up the 2007 Yaris on toyodiy.com part number diagrams, there isn't a price listed for the 4 pin connector. Perhaps theres just no other way for me to find this connector?
I wonder if mouser or one of the other giant electronics parts shops would have that they of connector....?
I am going through the same thing trying to order the connector for the occupant classification ECU. To order connectors it appears that the person ordering has to have a valid VIN number for a vehicle that contains that connector. The EPC doesn't list the connectors, so the ordering Toyota person has to request the part (with a VIN) and then is given pricing.Originally Posted by vitriumgts ↑My dealership parts dept friends can't seem to get a handle on D79 8 pin connector as the part number is invalid. Also, when I looked up the 2007 Yaris on toyodiy.com part number diagrams, there isn't a price listed for the 4 pin connector. Perhaps theres just no other way for me to find this connector?
They have the pins, but the connector housings are custom.Originally Posted by talnlnky ↑I wonder if mouser or one of the other giant electronics parts shops would have that they of connector....?
I think 2008 models are too new to be in the database at dealerships because only the 2007 4 pin connector is readily in search systems.
so my friend bought a new corolla with his cash for clunkers rebate and his AUX assembly is 8 pin just like the 2008 yaris. I look very closely at the white connector while it was out and without any magnifying glass or a marker to make the numbers stand out, I managed to find out its a tyco electronic connector and i can only make out the numbers 12551 on it. But for sure I recognize the tyco font so I'll be researching this
thank guys for all the infos...especially Dave for photos ~~ i found my 4 pin connector at passenger side empty slot...it was bit hard to find this plug cause it was small and wrapped with tape with the wire bundle...anyway it was there exactly where Dave mentioned and bought the aux (stereo adapter assy.) around $33 canadian at local dealership. I have 2007 Yaris, Sedan.
After a little digging at the Tyco Electronics website, a representative contacted me and according to the engineering department the 2X4 8 pin connector is: 175964-1Originally Posted by vitriumgts ↑so my friend bought a new corolla with his cash for clunkers rebate and his AUX assembly is 8 pin just like the 2008 yaris. I look very closely at the white connector while it was out and without any magnifying glass or a marker to make the numbers stand out, I managed to find out its a tyco electronic connector and i can only make out the numbers 12551 on it. But for sure I recognize the tyco font so I'll be researching this
http://www.tycoelectronics.com/catal...&RQPN=175964-1
It looks to be a match. I'll be ordering one and see if I can finally link my yaris deck to an aux stereo jack
Does vitriumgts or anyone else know what the female part number is that matches the Tyco 175964-1?
I'm not even sure if one exists but I would prefer to have that add some wire to the correct pin locations and then splice on my RCA connectors or run the wires into my after market Pioneer stereo harness.
The reason I would like to do this is because I'm looking at possibly adding an extra AUX input for people in the back and I would also like to not hack up the existing AUX input to make it work with my new stereo. That way if I sell my car I can remove my stereo and none of the factory wiring would be touched.
Thanks for the help.
I'm not even sure if one exists but I would prefer to have that add some wire to the correct pin locations and then splice on my RCA connectors or run the wires into my after market Pioneer stereo harness.
The reason I would like to do this is because I'm looking at possibly adding an extra AUX input for people in the back and I would also like to not hack up the existing AUX input to make it work with my new stereo. That way if I sell my car I can remove my stereo and none of the factory wiring would be touched.
Thanks for the help.
funny you mention that..... i used to work for mouser so if anyone needs a large part order at cost i might still be able to help. they have connectors but the housing isnt gonna work....Originally Posted by talnlnky ↑I wonder if mouser or one of the other giant electronics parts shops would have that they of connector....?
I'm having a very tough time ordering a single unit of this connector, and I'm working hard to even get a single sample. Its all Bulk orders or nothing. Can anyone provide any help?
Originally Posted by ChevronTango ↑Hey guys, I was wondering if I could get some advice.
I've got a yaris T3, unmodified since the day I bought it and was rather hoping I could add a stereo jack into the in car stereo. The stero looks like this btw
http://www.motiontrends.com/2006/m10...TS_console.jpg
though mine doesn't have the funky dash and air con above and below it. Anyway I did some reading and was told that it would have a set of aux cables by the Handbrake and gear stick. so I poked around and sure enough found a loose connector.
http://imgur.com/WCKEe.jpg
http://imgur.com/hZ6gp.jpg
however when I looked closer and peered around the net some more I became less convinced it was the right cable. For starters the colours on it were very odd, and didn't match anything I'd seen mentioned here or elsewhere.
http://imgur.com/MIzfY.jpg
if you can't easily make out the colours they are
pastel blue
white
brown
pastel green
white black
so I'm confused as to where to go next. is this right, am I even on the right lines. Is it even possible? Sorry if I sound a touch helpless, not really sure where else to turn.
No, that connector is not for the AUX jack, and that particular head unit does not support a direct plug in AUX jack.
You may be able to find an aftermarket AUX adapter that works with your radio.Originally Posted by ChevronTango ↑So is there no way for me to get an aux input (3.5mm stereo jack) for that HU?
Possibly something like this:
http://cgi.ebay.co.uk/CTVTYX002-TOYO...item255b652ec5
Calling CTSCOTT for help!
i have a 2007 LB 5 speed and it came with a factory 4 pin aux connector
i check the connection on the HU and the cables that to the aux port
connection is sold, cables all work using a ohm meter..
nothing is working....
you keep stating that LB has a 8 pin set up and sedans have the 4 pin??
please help
i have a 2007 LB 5 speed and it came with a factory 4 pin aux connector
i check the connection on the HU and the cables that to the aux port
connection is sold, cables all work using a ohm meter..
nothing is working....
you keep stating that LB has a 8 pin set up and sedans have the 4 pin??
please help
According to the service manual, only Sedans used the 4 pin jack, but considering that only 4 pins are used, it really doesn't matter.Originally Posted by evil03 ↑Calling CTSCOTT for help!
i have a 2007 LB 5 speed and it came with a factory 4 pin aux connector
i check the connection on the HU and the cables that to the aux port
connection is sold, cables all work using a ohm meter..
nothing is working....
you keep stating that LB has a 8 pin set up and sedans have the 4 pin??
please help
Check out the post below, as I suspect the switching mechanism within your port may be damaged:
Aux Input Trouble
the aux port looks to be in good
pin 3 and 4 is getting 2.6 ohm when a cable is plugged in
radio is model 11807
pin 3 and 4 is getting 2.6 ohm when a cable is plugged in
radio is model 11807
2.6 or 2.6K ?Originally Posted by evil03 ↑the aux port looks to be in good
pin 3 and 4 is getting 2.6 ohm when a cable is plugged in
radio is model 11807
I believe that jack is a Scion one, as the Yaris one has small text that is perpendicular, rather than parallel to the flap.
This the part number i got form the part 86190-52010 will check the car after work
Ah, that part number is definitely the Scion one, but as long as the pinout is the same and the switched pin has a ~2.2K resistor, it would work.Originally Posted by evil03 ↑This the part number i got form the part 86190-52010 will check the car after work
Can you snap a pic of which head unit you have as well?
ctscott
here they are
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
here they are
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
3 attachments not included in this copy
Actually that's OK. I was able to verify by the model number that it is an AUX capable head unit. Did you verify the resistance as ohms or kohms?Originally Posted by evil03 ↑ctscott imma trying upload the pics but it wont let me
ctscott
2.666 k ohms is what i am reading off the aux port pin 4 and 3
with a mini jack plugged in with out the actual port plug in to the wiring harness
2.666 k ohms is what i am reading off the aux port pin 4 and 3
with a mini jack plugged in with out the actual port plug in to the wiring harness
Originally Posted by evil03 ↑ctscott
2.666 k ohms is what i am reading off the aux port pin 4 and 3
with a mini jack plugged in with out the actual port plug in to the wiring harness
Grab a 2.2k resistor from Radio Shack and try a quick test:
With the 4 pin connector to the jack the wire order should be green, red, grey, red.
Take the 2.2K resistor and stick it into the red (opposite the green) and the grey and then press the aux button on the radio and see if it goes into aux mode.
Ctscott
No luck..... 2.2k in pin 4 red and 3 Greg
No luck..... 2.2k in pin 4 red and 3 Greg
If the jack and cable came off a Scion, then the radio end may be pinned incorrectly.Originally Posted by evil03 ↑Ctscott
No luck..... 2.2k in pin 4 red and 3 Greg
The image below shows the radio connector of a Yaris, looking into the holes.
ALI: Aux Left
ARI: Aux Right
ASGN: Ground
AUXI: Switch input to enable aux mode.
Picture not included in this copy
Make sure that the red and black (or grey) above go to AUXI for the Red and ASGN for the black or grey wire.
Ctscott
Everything is correct on my end according to your schematic but no dice
Everything is correct on my end according to your schematic but no dice
Ctscott
I got it
Radio 11807
Is a 8 pin set up
In just added a 2.2k resistor to pin 19 and 18
But 18 pin is empty so I found random pin that fit the socket and made the connection with the radio
Everything works now
Thanks a bunch
I got it
Radio 11807
Is a 8 pin set up
In just added a 2.2k resistor to pin 19 and 18
But 18 pin is empty so I found random pin that fit the socket and made the connection with the radio
Everything works now
Thanks a bunch