Yarisworld Archive

my knockoff-rota thread. ask Tamago!

49 posts · 28,598 views

TamagoOriginal postOff Grid · May 15, 2009#1
ask tamago anything!

i am not guaranteeing my answers to be 100% correct

Replies 48

cali yarisCanoga Park, CA · May 15, 2009#2
LOL. What are you doing to your car now that you took off the turbo kit?
33OHDover, Ohio · May 15, 2009#3
Let me even ask you a question about Rota's: what should I search for to find a wheel similar to this design? (i.e. ebay, craigslist, classifieds..) 😁

Picture not included in this copy
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#4
i have tein springs and 205-55-15 dunlops. 15x? and what offset are i looking for......
jclo3313Woodstock, Ga · May 15, 2009#5
What finishes do they come in?
TamagoThread starterOff Grid · May 15, 2009#7
Originally Posted by cali yaris ↑
LOL. What are you doing to your car now that you took off the turbo kit?
it's for sale.

but most likely going to big power, 15X9's and some nice sticky rubber.
TamagoThread starterOff Grid · May 15, 2009#8
Originally Posted by ryank ↑
Let me even ask you a question about Rota's: what should I search for to find a wheel similar to this design? (i.e. ebay, craigslist, classifieds..) 😁

Picture not included in this copy
Rota RB
Konig Rewind
Panasport replica
TamagoThread starterOff Grid · May 15, 2009#9
Originally Posted by ROCKLAND TOYOTA ↑
i have tein springs and 205-55-15 dunlops. 15x? and what offset are i looking for......
15X7, +35 will be fine. minimal rubbing will occur that can be solved with a heatgun to the bumps in your fender liners.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#10
Originally Posted by Tamago ↑
15X7, +35 will be fine. minimal rubbing will occur that can be solved with a heatgun to the bumps in your fender liners.
i have scion xa/xb 10 spoke wheels 15x?. whats those specs and will they work in my situation.
Nexus1155Dorchester · May 15, 2009#11
Tamago I have K16 turbos on a 2.7L Engine, These turbos were meant to go on a 3.6L 997 Porsche

When do you think I will getting full boost by and how much power do you think i will make at 21psi

here is the map for good reference or a k16 map that is

http://www.sjmautotechnik.com/parts_.../turbo/k16.GIF
TamagoThread starterOff Grid · May 15, 2009#12
Originally Posted by ROCKLAND TOYOTA ↑
i have scion xa/xb 10 spoke wheels 15x?. whats those specs and will they work in my situation.
15x6 most likely

they'll work fine..

buy 20mm spacers for the rear
TamagoThread starterOff Grid · May 15, 2009#13
Originally Posted by Nexus1155 ↑
Tamago I have K16 turbos on a 2.7L Engine, These turbos were meant to go on a 3.6L 997 Porsche

When do you think I will getting full boost by and how much power do you think i will make at 21psi

here is the map for good reference or a k16 map that is

http://www.sjmautotechnik.com/parts_.../turbo/k16.GIF
wow that's hard to read.

what is the compression ratio of each engine, how will the charge air be cooled, and what are your injector sizes?
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#14
Originally Posted by Tamago ↑
15x6 most likely

they'll work fine..

buy 20mm spacers for the rear
will your 30's be too much?
TamagoThread starterOff Grid · May 15, 2009#15
Originally Posted by ROCKLAND TOYOTA ↑
will your 30's be too much?
my 30's?
33OHDover, Ohio · May 15, 2009#16
Originally Posted by Tamago ↑
Rota RB
Konig Rewind
Panasport replica
Thank you sir! 🎉
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#17
Originally Posted by Tamago ↑
my 30's?
weren't you polling to see if anyone was interested in 10 or 30mm spacers from you? also are spaces good with autocrossing.....
TamagoThread starterOff Grid · May 15, 2009#18
Originally Posted by ROCKLAND TOYOTA ↑
weren't you polling to see if anyone was interested in 10 or 30mm spacers from you? also are spaces good with autocrossing.....
that's 10 and 13
Gauging interest on hub spacers for the yaris

they'll be released for sale by the first of june.

with that wheel/tire package, you could easily run 13MM

they are great with autocrossing, are a great "in addition to" mod when doing a swaybar.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#20
Originally Posted by Tamago ↑
that's 10 and 13

they'll be released for sale by the first of june.

they are great with autocrossing, are a great "in addition to" mod when doing a swaybar.
WOW, what was i smoking that that day. what color should i paint those scion wheels or should i leave them as is?
TamagoThread starterOff Grid · May 15, 2009#21
Originally Posted by ROCKLAND TOYOTA ↑
what color should i paint those scion wheels or should i leave them as is?
that is not a question to be asked in this thread. save it for when peterpoop makes one 😆😆
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#22
Originally Posted by Tamago ↑
that is not a question to be asked in this thread. save it for when peterpoop makes one 😆😆
😆 NICE, thanks for the help.....
Russelt3hPirateEpcot · May 15, 2009#24
tamago, if I wanted to convert to xB 5x114.3 what would I have to do?
TamagoThread starterOff Grid · May 15, 2009#25
Originally Posted by Russelt3hPirate ↑
tamago, if I wanted to convert to xB 5x114.3 what would I have to do?
just kidding.


you'd need the following parts...

2EA 510063
2EA 512311
Russelt3hPirateEpcot · May 15, 2009#26
Originally Posted by Thirty-Nine ↑
Panasports are knock-offs of the Minilite.

http://www.minilitewheels.com/
oh snap. 🤣, knocking off knock offs. 😲
33OHDover, Ohio · May 15, 2009#27
Originally Posted by Russelt3hPirate ↑
no reason not to go real deal. ;)

http://www.panasport.com/street.html
Kind of is a reason. Can't seem to sell my Ray's for anything. Can't even find anyone to trade for Rotas, lol. 😆
Russelt3hPirateEpcot · May 15, 2009#28
Originally Posted by ryank ↑
Kind of is a reason. Can't seem to sell my Ray's for anything. Can't even find anyone to trade for Rotas, lol. 😆
G-Games yo!!

be proud of the model line. :)
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#29
Originally Posted by ryank ↑
Kind of is a reason. Can't seem to sell my Ray's for anything. Can't even find anyone to trade for Rotas, lol. 😆
17's came out in 1997 i think. i was first to have 17 inch konig impacts on my del sol back then. broke necks like nobody's business. problem is there so common now no one wants to spend big money on them......
33OHDover, Ohio · May 15, 2009#30
Originally Posted by Russelt3hPirate ↑
G-Games yo!!

be proud of the model line. :)
Ray's G-games 77W, lol. But yeah.. 😢
33OHDover, Ohio · May 15, 2009#31
Originally Posted by ROCKLAND TOYOTA ↑
17's came out in 1997 i think. i was first to have 17 inch konig impacts on my del sol back then. broke necks like nobody's business. problem is there so common now no one wants to spend big money on them......
I'm only asking $750 for rims and tires that were purchased for $2850 last year. And have low miles on them, only ran last summer and a little this spring.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#32
nice wheels but 750 buys a new set of knockoff's.....
TamagoThread starterOff Grid · May 15, 2009#33
Originally Posted by ryank ↑
I'm only asking $750 for rims and tires that were purchased for $2850 last year. And have low miles on them, only ran last summer and a little this spring.
have we learned our lesson about spending lots of money on "name brand" wheels?
33OHDover, Ohio · May 15, 2009#34
Originally Posted by Tamago ↑
have we learned our lesson about spending lots of money on "name brand" wheels?
Oh, I didn't spend the money. The dude I bought them off of did. I got a hell of a deal. 😁
TamagoThread starterOff Grid · May 15, 2009#35
Originally Posted by ryank ↑
I'm only asking $750 for rims and tires that were purchased for $2850 last year. And have low miles on them, only ran last summer and a little this spring.
Originally Posted by ryank ↑
Oh, I didn't spend the money. The dude I bought them off of did. I got a hell of a deal. 😁
ah, sounds deceptive!
33OHDover, Ohio · May 15, 2009#36
Originally Posted by Tamago ↑
ah, sounds deceptive!
The guy who purchased them bought them for $2850 last year, not me. I just picked them up a few months ago, February or March-ish.
TamagoThread starterOff Grid · May 15, 2009#37
ok, moving forward, more questions.
33OHDover, Ohio · May 15, 2009#38
Okay sorry.

Question: In relativity to other 17" rims, is 17 lbs. each a decent weight?
Nexus1155Dorchester · May 15, 2009#39
Compression ratio is 9.3:1 and the air will be cooled via FMIC which keeps a lower Delta IAT than the other aftermarket ones. Fuel will be shot into it with 60# (770cc?) injectors
TamagoThread starterOff Grid · May 15, 2009#40
Originally Posted by ryank ↑
Okay sorry.

Question: In relativity to other 17" rims, is 17 lbs. each a decent weight?
depending on offset, 17lbs for a 17X7 is acceptable for a wheel.
TamagoThread starterOff Grid · May 15, 2009#41
Originally Posted by Nexus1155 ↑
Compression ratio is 9.3:1 and the air will be cooled via FMIC which keeps a lower Delta IAT than the other aftermarket ones. Fuel will be shot into it with 60# (770cc?) injectors
435hp at the crank
33OHDover, Ohio · May 15, 2009#42
Originally Posted by Tamago ↑
depending on offset, 17lbs for a 17X7 is acceptable for a wheel.
ET42, but you kinda already answered. Thanks again. 🤘
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 15, 2009#43
weight of scion xa 10 spoke 15 inch wheel
TamagoThread starterOff Grid · May 15, 2009#45
Originally Posted by ROCKLAND TOYOTA ↑
weight of scion xa 10 spoke 15 inch wheel
16.5lbs

haha i have no idea.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 20, 2009#46
can i do autocross running 18 inch wheels??
TamagoThread starterOff Grid · May 20, 2009#47
Originally Posted by ROCKLAND TOYOTA ↑
can i do autocross running 18 inch wheels??
you CAN do anything you want. you can even go on a diet to lose weight, it'll make the car faster 👏
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 20, 2009#48
Originally Posted by Tamago ↑
you CAN do anything you want. you can even go on a diet to lose weight, it'll make the car faster 👏
I SEE this thread is overwith......