Yarisworld Archive

03 Yaris 1.0 VVti Engine Swap, URGENT help needed.

2 posts · 10,398 views

philwept_33Original postPoole, Uk · May 15, 2009#1
Hi im new on this forum so hoping someone out there can help me out.

On Christmas day the engine let go, so to cut a long story short got another one and although its from a 2003 and a 1sz engine code its an earlier one as the PAS pump is on the front of the engine rather than electric one which the car already has.

I fitted most of it yesterday however some of the sensors are not fitting. The main concern its the cam shaft position sensor as its is a 3 pin. On removing the old 2 pin one it seems about 5 mm longer meaning it fouls the cam shaft.

Please can someone help me on this as its been going on for ages and getting expensive!!!

thanks in advance - phil

Replies 1

TamagoOff Grid · May 15, 2009#2
Originally Posted by philwept_33 ↑
Hi im new on this forum so hoping someone out there can help me out.

On Christmas day the engine let go, so to cut a long story short got another one and although its from a 2003 and a 1sz engine code its an earlier one as the PAS pump is on the front of the engine rather than electric one which the car already has.

I fitted most of it yesterday however some of the sensors are not fitting. The main concern its the cam shaft position sensor as its is a 3 pin. On removing the old 2 pin one it seems about 5 mm longer meaning it fouls the cam shaft.

Please can someone help me on this as its been going on for ages and getting expensive!!!

thanks in advance - phil
you'll need an ECU and wiring harness to go with the new engine.