Yarisworld Archive

Seatbelt Temp Chime turn off option

26 posts · 9,433 views

gwasabiOriginal postHonolulu, Hawaii · May 15, 2009#1
So since I have a harness, I was trying to figure out how the hell I'm going to turn that friggin chime and seatbelt warning off. This was my solution.

The Seatbelt On and Off Switch.

Picture not included in this copy

I used the existing AUX jack because I have no use for it abnymore since my stock one is broken and I have a new aftermarket HU anyway.

Replies 25

tk-421Dagobah · May 15, 2009#2
🎉
SabretoothSt Cloud FL · May 15, 2009#3
DIY! Lots of people could benefit from this mod!
tk-421Dagobah · May 15, 2009#4
Originally Posted by Sabretooth ↑
DIY! Lots of people could benefit from this mod!
DIY is located here: Yarisworld.com DIY Manual v3
SabretoothSt Cloud FL · May 15, 2009#5
HurraH!
The ArchitectFL · May 15, 2009#6
Where did you get the switch that fills up the blank slot exactly.
mikenacaratoBrentwood, TN · May 15, 2009#7
goodness, this thread pops up a lot. howabout go to the dealer, 15 mins later free of charge, its gone
TamagoOff Grid · May 15, 2009#8
pull the plug out of the seatbelt latch

problem solved
cali yarisCanoga Park, CA · May 15, 2009#9
No dealer around here would disable an important safety feature like this. mikenacarato, are you sure?
mikenacaratoBrentwood, TN · May 15, 2009#10
positive, even says so in the owners manual. plus, ive had it done at my dealer already.
1stToyotaOklahoma · May 15, 2009#11
Seatbelt extension is the easiest solution. Dealership gives them out for free (written in your owner's manual), nothing to reprogram, just plug in and tuck extension between seat and console.
gwasabiThread starterHonolulu, Hawaii · May 15, 2009#12
the dealer wont do it on the driver's seat.....
KCALB SIRAYVirginia · May 15, 2009#13
you should put a sticker that says "Ejection Seat" above it
TamagoOff Grid · May 15, 2009#14
are we all ignoring the easy solution of unplugging the actual switch that goes to the seatbelt latch?
mikenacaratoBrentwood, TN · May 15, 2009#15
Originally Posted by gwasabi ↑
the dealer wont do it on the driver's seat.....
yes they will.
cali yarisCanoga Park, CA · May 15, 2009#16
if you unplug the switch at the seatbelt latch, don't you get a flashing seatbelt sign or something like that?
TamagoOff Grid · May 15, 2009#17
Originally Posted by cali yaris ↑
if you unplug the switch at the seatbelt latch, don't you get a flashing seatbelt sign or something like that?
you're correct

so. if your dealer won't disable the drivers side warning for you (which is possible, per the toyota service manual)

you can do this:

Picture not included in this copy

put a 20Kohm resistor between pin 3 and 4 under the seat
tk-421Dagobah · May 15, 2009#18
Interesting... Will that mess with the airbag deployment at all? The guy that sold me my car told me the airbags will not deploy if the passenger isn't wearing a belt. He said you are worse off if the airbag were to deploy that way. Probably 🙄
nemelekArizona · May 15, 2009#19
Originally Posted by cali yaris ↑
No dealer around here would disable an important safety feature like this. mikenacarato, are you sure?
Mine did.
tk-421Dagobah · May 15, 2009#20
Originally Posted by nemelek ↑
Mine did.
Mine too, after repeated attempts. But the ECU got reset and I need to do it again. 🙁
gwasabiThread starterHonolulu, Hawaii · May 15, 2009#21
Thats what I told my GF when she first saw it. I said it's a ejection button that ejects annoying passengers when they piss me off hahaha
TamagoOff Grid · May 15, 2009#22
Originally Posted by tk-421 ↑
Interesting... Will that mess with the airbag deployment at all? The guy that sold me my car told me the airbags will not deploy if the passenger isn't wearing a belt. He said you are worse off if the airbag were to deploy that way. Probably 🙄

he's right. no seatbelt + airbag = broken neck.

with this setup, if someone's in the seat, and you've disable the seatbelt latch, the airbag will deploy and probably kill your passenger.
gwasabiThread starterHonolulu, Hawaii · May 15, 2009#23
This isn't for the passenger side. This is only for the driver's side due to my harness. MY passenger side is still there and the dealer WILL turn the chime off for the passenger side but not the warning light. That's what i was told
TamagoOff Grid · May 15, 2009#24
Originally Posted by gwasabi ↑
This isn't for the passenger side. This is only for the driver's side due to my harness. MY passenger side is still there and the dealer WILL turn the chime off for the passenger side but not the warning light. That's what i was told
so put a resistor between pins 3 and 4 and you're set. resistors are about a buck at radio shack.


either way, if you're in an accident, you'll probably die anyway, with those brackets you got goin on lmfao
gwasabiThread starterHonolulu, Hawaii · May 15, 2009#25
Lifes no fun without dangers lol

I dunno if its 3 and 4 but its the red and green wire you can tap into and put a resister between them. I used a 2 ohm resister.
TamagoOff Grid · May 15, 2009#26
Originally Posted by gwasabi ↑
Lifes no fun without dangers lol

I dunno if its 3 and 4 but its the red and green wire you can tap into and put a resister between them. I used a 2 ohm resister.
and did it work?