Yarisworld Archive

Racing Bucket Seats & harness

33 posts · 6,691 views

gwasabiOriginal postHonolulu, Hawaii · May 13, 2009#1
So, Here is my new Bucket seats installed. It's my secret project I've been working on this month.

Here it is in all its glory,

ChargeSpeed Sport Bucket Seats (Everyone has Brides or Sparcos, But not ChargeSpeed! DIRECTLY FROM OSAKA! If you got the dough for recaro that's awesome seats but I don't think a grand for a seat is worth it on a yaris....maybe on my next car ;))

Takata 4 point Harness
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

This is how I mounted it to the stock rails.
Picture not included in this copy

Picture not included in this copy
Whoops how did my fat ass get in there.

Replies 32

gwasabiThread starterHonolulu, Hawaii · May 13, 2009#2
sorry small pics but its alright i guess hahaha
TamagoOff Grid · May 13, 2009#3
where are the shoulder straps mounted? don't drive around with that harness latched dude, for your own safety
gwasabiThread starterHonolulu, Hawaii · May 13, 2009#4
It's latched to the eyebolt where the Torque Screw would go. I had to buy new Eye bolts for it. Yea Thats just picture yesterday when It was all messy I gotta clean it out today.
fujiHonolulu · May 13, 2009#5
Did you get the seats here in Hawaii???
gwasabiThread starterHonolulu, Hawaii · May 13, 2009#6
munky wurks
mikenacaratoBrentwood, TN · May 13, 2009#7
it looks like the harness angle is too low. your at risk of neck injury if you get in an accident. other than that...very nice setup! how did u use the stock rails?
gwasabiThread starterHonolulu, Hawaii · May 13, 2009#8
added bigger pictures hehehe
gwasabiThread starterHonolulu, Hawaii · May 13, 2009#9
L brackets from 1/2' galvanized steel.

The harness is well within the limits hehehe its all g. its just snagged on my tool box right now hahaha
mikenacaratoBrentwood, TN · May 13, 2009#10
ok good. 45-90 degree is key :)
gwasabiThread starterHonolulu, Hawaii · May 13, 2009#11
I pulled off the rail from the stock seats. Wasn't hard just a bunch of bolts. I reused the bolts to attach the L brackets on to the rail again.
fujiHonolulu · May 13, 2009#12
Can a seat like this be used with the normal seat belt?
gwasabiThread starterHonolulu, Hawaii · May 13, 2009#13
YES! I actually still have my stock seatbelts in JUST incase I ever need to use em
mikenacaratoBrentwood, TN · May 13, 2009#14
any chance of a close up of the rails? :)
blacksandiegovitzJust chillin' out brah ! · May 13, 2009#15
Nice man , but whats up with the stock passenger seat ???
TamagoOff Grid · May 13, 2009#16
not one bit of that looks safe.











dee dee dee, not my problem!
awdblazerwinnipeg · May 13, 2009#17
i wouldnt run harnesses if i didnt have a roll cage definitly not safe at all and probably not legal at all
mikenacaratoBrentwood, TN · May 13, 2009#18
harness bar at least is recommended though. what ever happened with those?
gwasabiThread starterHonolulu, Hawaii · May 14, 2009#19
Lol, I like The stock passenger seat thing. It's more fun for passenger's when they're wooshing around. hahahaha

and Yea It's not the safest setup but it's all g. It works for me
TamagoOff Grid · May 14, 2009#20
Originally Posted by kustom play ↑
you do not need a cage to run harnesses

as long as there mounted 90 or 45 he will be fine
45 is WAY too steep.
mikenacaratoBrentwood, TN · May 14, 2009#21
.
ChinoCharlesOH · May 14, 2009#22
dee dee dee, not my problem!
Thanks dude. I just spit coke on my laptop.

Nice seats!
hamMI U.S. · May 14, 2009#23
Originally Posted by gwasabi ↑
So, Here is my new Bucket seats installed. It's my secret project I've been working on this month.

Here it is in all its glory,

ChargeSpeed Sport Bucket Seats (Everyone has Brides or Sparcos, But not ChargeSpeed! DIRECTLY FROM OSAKA! If you got the dough for recaro that's awesome seats but I don't think a grand for a seat is worth it on a yaris....maybe on my next car ;))

Takata 4 point Harness
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

This is how I mounted it to the stock rails.
Picture not included in this copy

Picture not included in this copy
Whoops how did my fat ass get in there.
That looks completely unnecessary. Add about 200 hp and a full race chassis before trying this again. Oh yeah, don't mount it like that again.
TamagoOff Grid · May 14, 2009#24
Originally Posted by ham ↑
That looks completely unnecessary. Add about 200 hp and a full race chassis before trying this again. Oh yeah, don't mount it like that again.
whether or not it's necessary on a yaris is not the point. to add speed, add lightness...

but i will agree.. with those brackets, even a small collision will cause those spindly little elbow brackets to cave in, compress and probably imbed themselves in an appendage or two.

dude, at least weld some gussets onto them.
gwasabiThread starterHonolulu, Hawaii · May 14, 2009#25
Eventually I plan on Welding a bar in between the front and back Brackets but this is good for now. I don't plan on racing anyone anyway and I don't have enough horsepowers to where the seats and harness will be necessary. It's just for looks for now lol

as far as lightness goes, the seat is WAY lighter than the stock ones. maybe half the weight of the stock.
mikenacaratoBrentwood, TN · May 14, 2009#26
with the little amount of money and all the time you took or will take the perfect them, you may as well get some wedge engineering brackets.
TamagoOff Grid · May 14, 2009#27
Originally Posted by gwasabi ↑
It's just for looks for now lol
if it's just for looks, you should make those brackets LOOK less like they came from a roofing supply store then ;)
gwasabiThread starterHonolulu, Hawaii · May 14, 2009#28
Well lets see.....

wedge engineering 200-300 bucks 20 min install
Bride 200-300 bucks 20 min install
Homemade stuff? 18 bucks 30 min install. I don't see me spending anymore than another 30 min plus about another 15 bucks to perfect them.


Whos gonna look under the seat anyway?! They'll look through the windows and be like damn that's a nice seat lol

It's just for looks NOW. I'll eventually make it safer later and honestly, I've seen the brackets they make for the seats. They LOOK better with better finish and all but they are actually just the same thing. A big piece of steel and bent to put the seats into where they need to be. It's the same thickness and everything. That's how I got the idea to go with a L bracket lol
TamagoOff Grid · May 14, 2009#29
Originally Posted by gwasabi ↑
Well lets see.....

wedge engineering 200-300 bucks 20 min install
Bride 200-300 bucks 20 min install
Homemade stuff? 18 bucks 30 min install. I don't see me spending anymore than another 30 min plus about another 15 bucks to perfect them.


Whos gonna look under the seat anyway?! They'll look through the windows and be like damn that's a nice seat lol

It's just for looks NOW. I'll eventually make it safer later and honestly, I've seen the brackets they make for the seats. They LOOK better with better finish and all but they are actually just the same thing. A big piece of steel and bent to put the seats into where they need to be. It's the same thickness and everything. That's how I got the idea to go with a L bracket lol
i did an oil change last week,

figured out that if i didn't put any oil back in, it saved me over $16! i mean, who looks in the engine? they'll just see my car and say WOW!

so it saved me time, i only had to drain the oil that was IN the car out, and replace the plug.

yeah, i know it's not safe, but for now i'm sure it'll be just fine.

thoughts?
Russelt3hPirateEpcot · May 14, 2009#30
Wow...

I guess if you're not racing you don't need crash protection.
gwasabiThread starterHonolulu, Hawaii · May 14, 2009#31
Not having a bracket wont throw a CEL lol

Well if your racing someone you'd need better crash protection than if your not
Russelt3hPirateEpcot · May 14, 2009#32
Originally Posted by gwasabi ↑
Not having a bracket wont throw a CEL lol

Well if your racing someone you'd need better crash protection than if your not
Very true, most car accidents % wise happen on the race track....
Russelt3hPirateEpcot · May 14, 2009#33
Originally Posted by kustom play ↑
my first MR2, i was stopped at a red light

then this old Buick smashes into me at 60mph

so im like WTF?

and hes like "ohh crap! i though we were racing"

and i was like no.

and he was like k

moral of the story

dont stop for red lights
DAMN, i thought the moral of the story was we should all walk. 🍻