Yarisworld Archive

Retrofit Question

20 posts · 8,127 views

ChinoCharlesOriginal postOH · May 13, 2009#1
OK, so I have the headlights installed and working. Brilliant!

Not so brilliant: kills the high beams, which I knew. However the retrofit is so damn bright I don't care. Question is can I wire the stalk to a set of fog lights in a way so that turning my high beams on in the cabin actually turns on the fogs?

Replies 19

battleversiontc808 · May 13, 2009#2
most likely all you gotta do is find the high beam wires and run them to the power side of the fogs and disconnect them from the headligh bulb harness so they dont turn those on
eTiMaGoBangkok, Thailand · May 13, 2009#3
Originally Posted by battleversiontc ↑
most likely all you gotta do is find the high beam wires and run them to the power side of the fogs and disconnect them from the headligh bulb harness so they dont turn those on
+1

Problem is, doing it this way, it would be like the regular lights, once you turn on the high beams?fogs, the low beams will be disabled, and it's not such a good idea for HIDs to be turned on and off quickly like that...

I do think there was a similar discussion in the past though, about the ability to have both high and low beams on at once. Might have been lost in the hack but I'll dig around...
ChinoCharlesThread starterOH · May 13, 2009#4
Bump
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 13, 2009#5
picture of new lights
ChinoCharlesThread starterOH · May 13, 2009#6
Picture not included in this copy

Violin built them. He did a phenomenal job.
marcustoronto, canada · May 13, 2009#7
Originally Posted by ChinoCharles ↑
Picture not included in this copy

Violin built them. He did a phenomenal job.
i like.. does violin sells them?? how much..is it cheaper the micro..
PETERPOOPOahu · May 13, 2009#8
those are pretty old. looks good.
taKutoToronto · May 13, 2009#9
Originally Posted by eTiMaGo ↑
+1

Problem is, doing it this way, it would be like the regular lights, once you turn on the high beams?fogs, the low beams will be disabled, and it's not such a good idea for HIDs to be turned on and off quickly like that...

I do think there was a similar discussion in the past though, about the ability to have both high and low beams on at once. Might have been lost in the hack but I'll dig around...
that's just a matter of diodes and relays. Assuming you have the proper relay harnesses already, you just need diodes. When the low-beam ground shuts off, you want to have the relay signal wires to still use the high-beam ground, and that will keep both on.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 13, 2009#10
OLD? not sure but better looking that DEPO crap.....
PETERPOOPOahu · May 13, 2009#11
if he bought the ones from violin, he made those in the begining of 07. Unless he had violin whip him up some new ones?
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 13, 2009#12
and thats old?
ChinoCharlesThread starterOH · May 13, 2009#13
Nope, they're the originals.

I ended up buying a harness. I didn't have the cajones to build one myself. I got it from theretrofitsource.com.
ChinoCharlesThread starterOH · May 13, 2009#14
By the way, they sat in my closet for over a year. Hopefully that explains everything lol.
WolfWingsKansas City, MO, USA · May 13, 2009#15
Looks decent, makes me think more seriously about doing the front-end overhaul on mine. Though I'll admit it's a bit of a pipedream, still want to just yank the whole front clip including the fenders, get a single-piece front shell made and replace the headlight modules with headlights more in the style of a TVR Chimera or the like.
ChinoCharlesThread starterOH · May 13, 2009#16
Originally Posted by marcus ↑
i like.. does violin sells them?? how much..is it cheaper the micro..
I forget what I paid for these. I think $600 lightly used. They're a jubgundous PITA to make. It was well worth it. They're from a BMW E46 if I'm not mistaken.
PETERPOOPOahu · May 13, 2009#17
$600!? and you make fun of people buying blitz kits!?


garm is bringing in the projector HID bi-xenon kits (not installed in the housing) to be able to do retrofits like camells. going to cost $200. i'll let you know how it goes.
ChinoCharlesThread starterOH · May 13, 2009#18
$600!?
Sure... the projectors, ballasts, bulbs, shrouds, labor... this isn't kiddy shtuff.

and you make fun of people buying blitz kits!?
Mostly you, you sucker. 😆
Russelt3hPirateEpcot · May 13, 2009#20
IIRC the E46 and S2000 projectors do both Hi and Low beam.

the Yaris would be sweet with some big effing driving lights + these.

maybe retro fit some crazy pencil lights into the turn signal area.

that'd be sweet.