Yarisworld Archive

an other blitz install thanks to Garm

19 posts · 14,146 views

s3r3nityOriginal postHull, QC · May 11, 2009#1
wanted to take the time to thank Garm for the great service with everything.

did the install over the weekend, took me a full day.

.. a few steps forward, a few steps back did occur but with the help of noogie's post all ended well 👍

i don't have my gauges setup yet so i can't say about my A/F but i did noticed the blitz fuel controller did say AT .... is that the case with you guys as well or do i need an exchange ?

lists of parts on it

Blitz supercharger kit
Miricle X brace rear - by Next
Stainless brake line kit
NST pulley set
NST cable bushings
NST cage bushings
DC Sports Header
Cold Air Intake
TRD Sport Shocks
TRD Sport Lowering Springs
TRD Rear Sway Bar
TRD Quick Shifter + TMW Quick Shifter
ATS Cups Wheel 7.0 x 15 with 195/45-15 Toyo Proxies 4


here she is

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Replies 18

33OHDover, Ohio · May 11, 2009#2
Awesome!

And I love your rims. 👍
eTiMaGoBangkok, Thailand · May 11, 2009#3
badass! and yeah those wheels rock, best way to get plenty of lip 😆
marcustoronto, canada · May 11, 2009#4
interested on the offset on that rims..


i found it.. its + 28 or +20 but which on e is it.
cali yarisCanoga Park, CA · May 11, 2009#5
CONGRATS man, well done!
NonStopTuningUSA · May 11, 2009#6
AWESOME!!!
LtNoogieWest Hills, CA · May 11, 2009#7
Take off that TRD CAI. There's a flimsy plastic stick inside the mid-section of the CAI where the foam filter is. Under the wrong condition, it could come loose and get sucked into the blower.

This is what I was told and when I took my TRD CAI off, I saw that little piece.

BTW, congratulations on a successful intall.
yaris-meAnaheim, CA · May 11, 2009#8
Congratulations!👍
m911gtChicago · May 11, 2009#9
haha, epic first post. Welcome and great ride!
PHXDEMONPhoenix, AZ · May 11, 2009#10
Interesting wheels. Congrats on being boosted 👍 You really should clean up that nasty engine bay before showing off your 3k+ investment 😆
m911gtChicago · May 11, 2009#11
Originally Posted by PHXDEMON ↑
Interesting wheels. Congrats on being boosted 👍 You really should clean up that nasty engine bay before showing off your 3k+ investment 😆
Ha, over 20k with all of that on a brand new 09! But still not a bad value for the little car.
jinxorSydney, Australia · May 11, 2009#12
congrats mate.... nice to see more boosted yarii on the forum...
supmetSouthern California · May 11, 2009#13
First boosted 5 door?
eTiMaGoBangkok, Thailand · May 12, 2009#14
Originally Posted by supmet ↑
First boosted 5 door?
echo_hrs would beg to differ... 😉
staticorexcivilwar town. · May 12, 2009#15
Congrats. It may not be that powerful but I love the sound. 👍 The more of us that buy these pricey upgrades the more they'll design and make. :)
s3r3nityThread starterHull, QC · May 13, 2009#16
Originally Posted by marcus ↑
interested on the offset on that rims..


i found it.. its + 28 or +20 but which on e is it.
+28 offset marcus.

I'm thinking of just taking the bypass out of my TRD intake and putting a spacer there...

Cheers
the bypass is there in case of water so that it doesn't turn into a shopvac and pull water in the engin.. may just be better to set the cone at that location instead ? (didn't that happend with someone on here with the aem cai ?)

i'll have to take a look at it but, what you guys are saying that might get sucked in is the little foam peice on the outside?


and thanks for the props guys 🎉
thebarberGrand Rapids, MI · May 13, 2009#17
Originally Posted by eTiMaGo ↑
echo_hrs would beg to differ... 😉
the OG is Teruyume though....06 s/c'd orange yaris...


Picture not included in this copy
eTiMaGoBangkok, Thailand · May 13, 2009#18
yes indeed, but not a 5-door 😉
kurokoma-kunmy own little world · May 13, 2009#19
Congrats s3r3nity! 🎉 nice set up

On your intake I suppose you could remove the water bypass and relocate the filter to that end. The AEM (the kind I've got) is a one piece design and yeah the filter is way down in the fender, right above the fog light. I don't remember anyone having issues with water but I could be wrong.