what ever happened with this?
Solid Motor Mounts
58 posts · 14,340 views · page 2 of 2
Replies continued
you must be bored today between this and the paddle shifters LOLOriginally Posted by Tamago ↑what ever happened with this?
i would love some better mounts.
Nobody else has tried this? I wounder how hard it is to remove the motor mount.
put car on jack stands, jack engine up slightly, unbolt and win?
you don't even have to jack the engine up. the yaris lower rear mount only serves as a dogbone, it does not support any weight iircOriginally Posted by Nexus1155 ↑put car on jack stands, jack engine up slightly, unbolt and win?
I actually did remove the side motor mount just to see if I could stiffen it a little bit, because the thing moves like 10 feet (at least it looks like it does when I rev the engine). It was a little hard to get the bottom bolt out, as I needed two different extensions on my socket, and had to jack the motor up to hold it in place. In the end, I decided not to do anything because I read THIS article and decided to buy the goop to stick in the mount to help make it more solid. I bought the goop, but I drive almost everyday, so no bones there, with the 24 hour dring period, but since I don't work on Sunday, I might just do it then, we will see.
with your situation its just wiser to buy an extra...
Yeah, cause I got so much bank, they call ME asking what I think, and I just say... "I'm broke. I mean, 'Bankrupt'." And that's how I roll, ya dig?