Yarisworld Archive

The Vitz is in the 14s!

67 posts · 26,550 views · page 1 of 2

ChinoCharlesOriginal postOH · May 6, 2009#1
Picture not included in this copy

Lesson learned: its half about the car and half about the driver.

What a night! There was a good turnout... probably 30-40 cars running, so the track wasn't too full which was nice. Here's how it went...

First run, I take off and miss second gear. (This would be a recurring theme) Still managed a 15.8, but at this point I knew the predicted 14.5 was going to be tough.

Second run I finally get one off. 15.4 @ 92 MPH. Now I'm flat out worried. The bald tires were more problematic than I was hoping, but even worse was the shifter. Second was becoming a 50/50 shot.

Anyway, Akron Horsepower tuned 5.0 Mustang? TOAST. Now it started getting fun.

Subaru WRX... TOAST.

S/C Bonneville... bye.

I didn't lose a race all night without missing second gear. Problem is that happened 3 times. We came to the conclusion that the reason for this was the excess movement in the engine bay knocking things out of alignment. In other words, torque damper and/or motor mounts VERY soon.

By the fouth run I tore the NST short shifter out. That'll be for sale soon. It wasn't making the prospect of shifting an already cranky gearbox any easier. So I keep running and running and by the 8th run I still just can't break the 15.3 mark. Best trap was 93.75. I come back and Doug from Forced4's starts talking about how he would love to drive it. I toss him the keys.

First time down the track he is rocking and grinding down the track. It was pretty funny. I forget what he ran though. He comes back and I was going to take it for the last run. He said he thought he had it down now. I said go for it.

He pulls up to the line, launches and does what essentially amounted to a 60' burnout. Slaps second and BOOM. The five of us F4's guys left are standing near the staging area saying "dude, I think he just got it." Sure enough, 14.9 @ 96 MPH.

We went crazy. It was the funniest thing ever. Driver mod FTW. 🤣 I need to learn to drive.

Best thing was he ran a 2.4 60'. My best of the night was a 2.2-something, so there is still a tenth or two in there somewhere.

Pictures to come. I didn't bother taking any because we brought a photographer. 😉 Got some NICE rolling shots on the way there.

Replies 66

KCALB SIRAYVirginia · May 6, 2009#2
niiice, can't wait for the pics
ChinoCharlesThread starterOH · May 6, 2009#3
The new goal: 100 MPH trap by the end of summer.
KCALB SIRAYVirginia · May 6, 2009#4
guess i can't post the hamster vid in here lol
eTiMaGoBangkok, Thailand · May 6, 2009#5
vroom, nice!
AstromanWenatchee, WA · May 6, 2009#6
You should post your time and slip in the 1/4 mile thread!
cali yarisCanoga Park, CA · May 6, 2009#7
14.9 -- I think that was my guess? yeah, way to go Chino! Now YOU do it!! 👍

(his reaction time wasn't that great, either, you can do better)
ChinoCharlesThread starterOH · May 6, 2009#8
Well, keep in mind nobody really worries about R/T at a test and tune night. Sit at the tree until you feel like you've got the launch, yanno?

I had some good reaction times. I'll sit down and go through the slips tonight. I know I fouled once by .01 seconds.
cali yarisCanoga Park, CA · May 6, 2009#9
I thought test and tune was for practising. That includes reaction times, at least for me -- I'm pretty crappy at drag racing, but I mean to fix that.
IllusionXBrossard, QC · May 6, 2009#10
oh.. it's turbo'd.. i thought you were running 14's stock :P

stock would do it in thd mid 16's with a good driver. People here don't want to drag with Echos, because they are too fast LOL
KCALB SIRAYVirginia · May 6, 2009#11
Be quick like squirrel, HY!



Picture not included in this copy
PETERPOOPOahu · May 6, 2009#12
your driver did good!
ChinoCharlesThread starterOH · May 6, 2009#13
He did! The boys in my car club can drive. We also had an STi run a 13.1! Aaaand a bugeye WRX run an 11.9! Aaaand a second gen DSM run a 14.01@101MPH!
BLAZINBLUEVITZNEW YORK · May 6, 2009#14
why didn't he just say you can't drive.....
PETERPOOPOahu · May 6, 2009#15
next time try and get a video camera of your runs. it'd be a great addition to the turbo video thread!

Originally Posted by BLAZINBLUEVITZ ↑
why didn't he just say you can't drive.....
Because that's not what I was implying.
ChinoCharlesThread starterOH · May 6, 2009#16
Originally Posted by BLAZINBLUEVITZ ↑
why didn't he just say you can't drive.....
Huh? I didn't understand the question.
BLAZINBLUEVITZNEW YORK · May 6, 2009#17
Originally Posted by ChinoCharles ↑
Huh? I didn't understand the question.
SORRY, it was about poops comment about your driver....
ChinoCharlesThread starterOH · May 6, 2009#18
Oh!

Dragging a turbocharged FWD vehicle with short gears is challenging. The trick is to let it spin in first. It is going to say you're going 30 MPH, but you aren't. You have to ride that out and stay in boost until you hit that threshold, THEN shift to second. I was shifting too soon. The one run where I nailed it, the engine bucked and I missed second. Sucks, but there will be other times.

I'm looking into getting the C-ONE engine and trans mounts to fix this problem.
ChinoCharlesThread starterOH · May 6, 2009#19
One shot of a few to come.

Picture not included in this copy

1 attachment not included in this copy

PETERPOOPOahu · May 6, 2009#20
sick! that'd be a nice signature pic.
ChinoCharlesThread starterOH · May 6, 2009#21
We've got a rolling photo shoot coming up with 15-20 turbocharged cars. THAT is gonna be the one. I'm going to smoke a couple sets of Subie tail lights this weekend in exchange for my headlight harness. The reason the bumper is f'd up on the passenger side is because there is a broken tab on that headlight. I need to get them suckers out.
PETERPOOPOahu · May 6, 2009#22
i hope your smoke job adds more gloss than that finish on your headlights.
ChinoCharlesThread starterOH · May 6, 2009#23
Well I didn't do mine right. I'm going to wet sand and clear coat these.
kurokoma-kunmy own little world · May 6, 2009#24
Congrats Charles! 🙇

Never drag raced or even thought of drag racing, thanks for describing the launch concept--what do you do with tire pressures?
PETERPOOPOahu · May 6, 2009#25
good call; and a nice buff will do the trick.
ChinoCharlesThread starterOH · May 6, 2009#26
Originally Posted by kurokoma-kun ↑
Congrats Charles! 🙇

Never drag raced or even thought of drag racing, thanks for describing the launch concept--what do you do with tire pressures?
Thanks KK!

We didn't do anything, but a couple of psi out of each tire would certainly help. I was running 33 psi.
ChinoCharlesThread starterOH · May 6, 2009#27
OOOOOOMFG can these boys shoot pics.

Picture not included in this copy

1 attachment not included in this copy

PETERPOOPOahu · May 6, 2009#28
beautiful
1stToyotaOklahoma · May 6, 2009#29
Hyper1/4miler ! 🙂
ChinoCharlesThread starterOH · May 6, 2009#30
Funny thing is I think I may have still pulled off a 30+ MPG tank. That is with 10 top speed runs. 😆

If you don't love the Yaris, you're on crack.
LtNoogieWest Hills, CA · May 6, 2009#31
Ok, call me stoopid but what does missing second mean? You don't get the transmission into second gear crisply so you slow down while you're off the throttle?
YAR1SRaleigh, NC · May 6, 2009#32
:D HAHA nice
Russelt3hPirateEpcot · May 6, 2009#33
drivers more than 50/50

a good driver can shave tenths at every shift. :)

good luck, any more weight reduction in order?
Russelt3hPirateEpcot · May 6, 2009#34
Originally Posted by LtNoogie ↑
Ok, call me stoopid but what does missing second mean? You don't get the transmission into second gear crisply so you slow down while you're off the throttle?
it's exactly how it sounds.

you try to shift into 2nd but you let out the clutch before you're in gear and you end up revving up in neutral.

or you grind the piss out of it for a second (generally that slows people down too).

if you've ever drag raced or if you ever do, you'll most likely experience the same thing. (unless you have an auto).
cali yarisCanoga Park, CA · May 6, 2009#35
Dragging a turbocharged FWD vehicle with short gears is challenging.
I think they Yaris has pretty TALL gears. At least compared to the other FWD cars I've raced in (tC, xB)
LtNoogieWest Hills, CA · May 6, 2009#36
Originally Posted by Russelt3hPirate ↑
it's exactly how it sounds.

you try to shift into 2nd but you let out the clutch before you're in gear and you end up revving up in neutral.

or you grind the piss out of it for a second (generally that slows people down too).

if you've ever drag raced or if you ever do, you'll most likely experience the same thing. (unless you have an auto).
Yah, I have an auto and would not know if there are special methods to drag race that way. I would guess it would be manually holding back on the gears until the right RPM? My dyno guy said that some autos, in order to protect themselves, will shift up to the next gear even if you keep the shift lever in the lower gears. I have not really wanted to test that.
ChinoCharlesThread starterOH · May 7, 2009#37
Ok, call me stoopid but what does missing second mean? You don't get the transmission into second gear crisply so you slow down while you're off the throttle?
very nice and congrats on the 1/4. about you missing second is it possible you weren't clutching all the way in, you know in the heat of the moment you're not going all the way in?🤷
It isn't that, but...

you grind the piss out of it for a second (generally that slows people down too).
YEP! The stick will just jam on you halfway, but you've already started to let the clutch go and GRRRKKKKKKK fail. Its my presumption that this is caused by the engine bucking around and screwing with the linkage. Sound about right?

I think they Yaris has pretty TALL gears. At least compared to the other FWD cars I've raced in
Did I just hear you say you were going to swap a 6 speed? 😁 Maybe my problems with the gearing are actually rooted in that open diff.

I installed a boost gauge and GUESS WHAT?! 6 psi in third. What that means I don't know, but taking it to a dyno just jumped up the list of crap to do. I'm considering getting the following:

http://www.bulletproofautomotive.com...il.php?ID=5196
http://www.bulletproofautomotive.com...il.php?ID=5195
http://www.bulletproofautomotive.com...il.php?ID=5203

That should help put a little more power to the ground. We shall see...

Two more things... one, I looked back at my slips and realized I ran a .0000 reaction time on one run. LOL, it was the 2.2x 60' run where I missed second. Its the one that got away. That and I got 34 MPG on a tank where I ran @ the track. 🤣 Yaris FTW.
anonymous userwindward oahu · May 11, 2009#38
Is this the quickest USDM car so far?
If there's one thing I learned from drag racing, it's the fact that i'm not the quickest shifter in the world, but atleast i don't break trannies and gears. :)
ChinoCharlesThread starterOH · May 11, 2009#39
Documented. That RWD Drift Yaris would kill Garm and I both, but if you don't post the slip it don't count!
Russelt3hPirateEpcot · May 11, 2009#40
Did bulletproof confirm the C-One damper will work on the USDM NCP91 cars (since it's not listed to the JDM version either according to C-One)?
ChinoCharlesThread starterOH · May 11, 2009#41
I'll e-mail them and ask. I'll let you know.
thebarberGrand Rapids, MI · May 11, 2009#42
Originally Posted by PK198105 ↑
very nice and congrats on the 1/4. about you missing second is it possible you weren't clutching all the way in, you know in the heat of the moment you're not going all the way in?🤷
probably shifting too fast...or that the tranny is hot from punishing it...

i take it you've never drag raced...

nice times though chino...but it always sucks when someone else can drive your car faster than you can...
Russelt3hPirateEpcot · May 11, 2009#43
Originally Posted by thebarber ↑
but it always sucks when someone else can drive your car faster than you can...
that's the best, it proves you have some free mods you can still do.

aka. learn to drive chino!! 😛
ChinoCharlesThread starterOH · May 11, 2009#44
It won't last long. 🙂 I'm getting better.

Don't forget I beat his 60' on that run by .2 seconds. If I could put a good front and back half together I think I can run a 14.6-14.7 @ 6 psi. That isn't bad if you ask me.
Russelt3hPirateEpcot · May 11, 2009#45
Originally Posted by ChinoCharles ↑
I'll e-mail them and ask. I'll let you know.
the last post sounded like you already had talked to them about everything and had the stuff on order.
ChinoCharlesThread starterOH · May 11, 2009#46
Noooo, I did talk to them but I talked to Garm too and he convinced me to try the torque damper first and see how that goes before I make the leap to the tranny mount. From what I hear (another member here has it) it pretty much makes the car undrivable under about 2,000 RPM.

However, it should fit. Bulletproof was a vendor here back in the YW stone age and they pushed those products hard, but like I said I'll double check.
Russelt3hPirateEpcot · May 11, 2009#47
Originally Posted by ChinoCharles ↑
Noooo, I did talk to them but I talked to Garm too and he convinced me to try the torque damper first and see how that goes before I make the leap to the tranny mount. From what I hear (another member here has it) it pretty much makes the car undrivable under about 2,000 RPM.

However, it should fit. Bulletproof was a vendor here back in the YW stone age and they pushed those products hard, but like I said I'll double check.
please do, as everywhere else it says it's not designed for the NCP91

here it is installed on the NCP13, if you want to be the $300 guinea pig I wont stop you.

Picture not included in this copy
Russelt3hPirateEpcot · May 11, 2009#49
Originally Posted by ChinoCharles ↑
OHHHH I get what you're asking now.

http://www.bulletproofautomotive.com...il.php?ID=5195

THAT part. I've got the Nitto version coming this week.
🤣

that's the one i've been talking about.

the other two parts you have listed fit no problem as long as you're ok with the NVH. (C-One lists those for the NCP91).
thebarberGrand Rapids, MI · May 11, 2009#50
i had Energy Suspension polyurethane mounts on my xrs and it was perfectly driveable....just transferred more engine vibration thru to the steering wheel and chassis and stuff....but in no way was in uncomfortable or remotely undriveable.

sure stopped the wheel hop when launching...