Yarisworld Archive

2009? Any different?

12 posts · 3,910 views

TaiyakiOriginal postHonolulu, HI · May 5, 2009#1
I was wondering if engine mods for 07-08 are the same for 09.
I think I read that the NST short shifter kit doesnt fit the 09. is that true?

Replies 11

suillerTurin - Piedmont - italy · May 5, 2009#2
for what I know it doesn't fit... at least after asking here around
TaiyakiThread starterHonolulu, HI · May 5, 2009#3
ahh i see, so what about everything else?
MGarganoNJ · May 5, 2009#4
Originally Posted by Taiyaki ↑
I was wondering if engine mods for 07-08 are the same for 09.
I think I read that the NST short shifter kit doesnt fit the 09. is that true?
I have both NST SSK on my 09 and they fit just fine
suillerTurin - Piedmont - italy · May 5, 2009#5
Originally Posted by MGargano ↑
I have both NST SSK on my 09 and they fit just fine
hi friend... but I suppose you engine is the 1.5 liter... isn't it?? anyway mine is the "new" 1.33 (101hp)
MGarganoNJ · May 5, 2009#6
Originally Posted by suiller ↑
hi friend... but I suppose you engine is the 1.5 liter... isn't it?? anyway mine is the "new" 1.33 (101hp)
Yeah I just saw you have the 1.3... mine's the 1.5
TaiyakiThread starterHonolulu, HI · May 5, 2009#7
I have a 1.5 also
StefanVVTiBucharest, Romania, Europe · May 5, 2009#8
The 09 diesel has better torque, 6 speed gearbox, but it's 1s slower than 06, 07, 08(11.7 s vs. 10.7 s 0-62 ). The 09 also gets better fuel economy...
rningonfumesSoCal · May 5, 2009#9
There is no engine and drive train changes in the US market. Closes thing is Auto only in the 5 door but this has nothing to do with your question.

US only has 1 engine-- 1.5 liter with a 5speed manual or 4 speed Auto.
IllusionXBrossard, QC · May 5, 2009#10
SOME 09 have different shifter linkage... in that case, the in engine compartment NSK ssk will not work. (so that i read)
mikenacaratoBrentwood, TN · May 5, 2009#11
i encountered the shift linkage issue in the engine bay with mine. i just took a dremel and grinded the edges down until it fit over the linkage.
suillerTurin - Piedmont - italy · May 6, 2009#12
Originally Posted by mikenacarato ↑
i encountered the shift linkage issue in the engine bay with mine. i just took a dremel and grinded the edges down until it fit over the linkage.
this is interesting... do you have the 1.33 engine?