Try resetting the engine again... then make sure you have the right A/F sensor in the header, and that it is hooked up properly. I bought a replacement, but it was an O2 sensor, and it messed up my plugs and battery. Other than that, go to Auto Zone, Chucks, or a tuner, and ask them to read your CEL for free (most will, especially if you explain that you're tuning a rare car) and see what it says. I had mine read at 2 different places. I got the message Engine Heater Coil, or something like that, and that was the stupid A/F sensor. Did you crank the hack out of it when you put it in? Hope these tips work... and good luck.
AMK Racing Header
56 posts · 14,679 views · page 2 of 2
Replies continued
Ok so I wanted more power from my lil yaris so I decided wtf, I'm going to put this header back on. Success! I unplugged the battery before running the car with the header and made sure the gaskets were on properly. I've been running it for a couple days (really really hard at some points) and have not gotten a CEL. Heres a sound clip of it with my other mods (in my signature).
Direct Link: http://www.inimi.org/downloads/eiiexhaust.avi
YouTube Link: http://www.youtube.com/watch?v=rgQiuWupPgw
So I hang out with a lot of Honda folk, DAs, DBs, EGs, EKs, etc to the far as you can see. I've let them drive my car before the headers with my other mods and they were impressed with the "pickup" my car had. A major compliment considering I have to take so much from them being honda fanatics and me owning a Yaris xD. I put these headers in and they love the sound and when they tried driving it this time the first words that came to their minds was "TORQUE-Y!"
I gained a lot of torque through out the rpm range, waaaaaaaaaaaaay more than I had expect. The sound is pretty nuts to if you havent checked out the sound clip. Wow, just wow...
Direct Link: http://www.inimi.org/downloads/eiiexhaust.avi
YouTube Link: http://www.youtube.com/watch?v=rgQiuWupPgw
So I hang out with a lot of Honda folk, DAs, DBs, EGs, EKs, etc to the far as you can see. I've let them drive my car before the headers with my other mods and they were impressed with the "pickup" my car had. A major compliment considering I have to take so much from them being honda fanatics and me owning a Yaris xD. I put these headers in and they love the sound and when they tried driving it this time the first words that came to their minds was "TORQUE-Y!"
I gained a lot of torque through out the rpm range, waaaaaaaaaaaaay more than I had expect. The sound is pretty nuts to if you havent checked out the sound clip. Wow, just wow...
So your $69.00 header is all good now .
did you replace any of the gaskets 🤷
anyway congrates on getting it sorted 👍
did you replace any of the gaskets 🤷
anyway congrates on getting it sorted 👍
I'm using stock gaskets. I just have a feeling the stock gasket at the collector doesnt work 100% on the aftermarket header, well for this ebay one that is. The gasket is working though, I had it without the gasket on the aftermarket header and it just sounded terrible. I mean its possible that its normal for the engine to be this loud with an aftermarket header. I need to get with one of the members here in socal who has or has had a header and see if they are experience the same noise.Originally Posted by 1NZYaris1 ↑So your $69.00 header is all good now .
did you replace any of the gaskets 🤷
anyway congrates on getting it sorted 👍
you have the bolts with springs in the exit of the header ?? i think is necessary maintain the springs
Yeah, I used the stock bolts and springs. I've gotten very used to the extra engine noise and it seems normal to me now. I got bigger problems now, got into an accident and now my frame is messed up in the front :'(.........................