Yarisworld Archive

Swapping Out Gauge Pack

67 posts · 19,966 views · page 2 of 2

Replies continued

n2oinfernoGreenwood, SC · Jul 15, 2009#51
Absolutely fantastic news.
mikenacaratoBrentwood, TN · Jul 15, 2009#52
i got an 09 cluster. there were no problems installing it at all, it was very easy and took about 10 mins or less and you only need a phillips head screwdriver.. ill take a pic later tonight for you guys and post a pic of the box with the P/N.
CTScottUSA, CT · Jul 15, 2009#53
Originally Posted by mikenacarato ↑
i got an 09 cluster. there were no problems installing it at all, it was very easy and took about 10 mins or less and you only need a phillips head screwdriver.. ill take a pic later tonight for you guys and post a pic of the box with the P/N.
Interesting. The 09 service manual doesn't mention anything about reprogramming. In the replacement procedure it does mention disconnecting the battery (but then again it does for replacing anything electrical).

You may want to try for the heck of it disconnecting the negative battery cable for a couple of minutes to see if perhaps on a cold boot the ECM and the combination meter do some type of a sync.
mikenacaratoBrentwood, TN · Jul 15, 2009#54
ill go do that right now and let you guys know here in a few mins. im at work so i cant upload pics or anything because of the blocks.
mikenacaratoBrentwood, TN · Jul 15, 2009#55
well the negative terminal cant be taken off because of the strut bar being almost on top of it. ill have to tinker with it when i get home and dont have to be away from my desk for a long time. ill let you guys know later.
CTScottUSA, CT · Jul 15, 2009#56
Originally Posted by mikenacarato ↑
well the negative terminal cant be taken off because of the strut bar being almost on top of it. ill have to tinker with it when i get home and dont have to be away from my desk for a long time. ill let you guys know later.
You can try just popping the two ECM connectors.
auxmikeLI, New Yawk · Jul 15, 2009#57
8380052P10 =$385.60
Instrument panel - Cluster and switches - Cluster assy - W/o abs
W/s model - Hatchback 2008 😲
mikenacaratoBrentwood, TN · Jul 15, 2009#58
for a 2009 the hatches auto and manual share the same part #. and they all have ABS so the 1 part number i post for 2009 will fit all 09 hatches
Sodium DuckWestern Mass. · Jul 15, 2009#60
That's a sedan cluster, won't fit hatchbacks.
mikenacaratoBrentwood, TN · Jul 15, 2009#62
IDK about swapping to a KPH cluster though. If it works then do it
auxmikeLI, New Yawk · Jul 15, 2009#63
I have an auto + a scanguageII so I'm not messing with my cluster.
Thought a Canadian member might want it though.....
mikenacaratoBrentwood, TN · Jul 16, 2009#64
here is another interesting fact about this swap...if you have had you seatbelt charm turned off by the dealer, you will have to have it turned off again. the programming for the charm is in the cluster.
CTScottUSA, CT · Jul 16, 2009#65
Originally Posted by mikenacarato ↑
here is another interesting fact about this swap...if you have had you seatbelt charm turned off by the dealer, you will have to have it turned off again. the programming for the charm is in the cluster.
That makes sense. The key reminder buzzer interval, light reminder buzzer (on/off), seat belt buzzer (on/off) and units by region are all customizable parameters of the meter's CPU.

Did you get a chance to try the ECM cold boot yet?
mikenacaratoBrentwood, TN · Jul 16, 2009#66
i have not. i got home from work at 1230am and had be be back in at 10am... :(
ChinoCharlesOH · Jul 16, 2009#67
SWEEEEEET! This question has been lingering for years.