Yarisworld Archive

rods and pistons available

71 posts · 17,927 views · page 2 of 2

Replies continued

Russelt3hPirateEpcot · Apr 27, 2009#51
Originally Posted by battleversiontc ↑
i actually know alot of 1nzfes that are pretty beefied up and they drive it daily and beat on it like every weeked yet still drive home and the next day and so on its called the xb
I'd love to see them.

and if this has been done why hasn't it transferred to the yaris?

you'd think with all the "beefed" up xB's running around you'd see some of it transfer over.
jounabayamon puerto rico · Apr 27, 2009#52
i'm going to do the .20 prius pistons and forged rods with all the goodies ''e manage ultimate 1zz throttel tc injectors ect. and lets see what's going to happen
ChinoCharlesOH · Apr 27, 2009#53
Originally Posted by Russelt3hPirate ↑
to get a yaris in the 10's you'd need to have huge drag slicks, and a motor that didn't make any power below 6k rpm.

it takes alot of home cooked quality engineering to build a 10 second car for sub $12k btw, then again since we're bench racing we might as well say we can do a 8 second yaris for another $3k. 🤣

a fully caged, stiff ass suspension, properly sized wheels/tires, and mild turbo kit Yaris would be a hell of alot more fun (and cheaper) then a 10 second yars.

30 minute lapping session > 4 10 second pulls 👍
Maybe 10 seconds is pushing it, but 10 bucks says Garm puts an 11 second road course monster Yaris on the ground by the end of next summer.
Malaya1221Torrance, Ca · Apr 27, 2009#54
leslie armendariz's xb ran 12.97 at 18 psi on slicks, tube chassis(1750 lbs car) and a buillt motor...garm needs more work to hit the 13, 12, 11 second mark...hope he does...
at3GGVA Beach · Apr 27, 2009#55
Originally Posted by Russelt3hPirate ↑

30 minute lapping session > 4 10 second pulls 👍

phew some elaboration was all i was looking for haha ....to simply say a 10sec yaris would be boring...with no reference to what it would boring compared to...ex:road course time vs drag strip time...struck me as odd. Point taken now though. 👍
taKutoToronto · Apr 27, 2009#56
Originally Posted by jouna ↑
i'm going to do the .20 prius pistons and forged rods with all the goodies ''e manage ultimate 1zz throttel tc injectors ect. and lets see what's going to happen
keep us updated, definitely would like to see how things work out for you. Make your own thread once you've got some progress, this thread is pretty much going nowhere.
ChinoCharlesOH · Apr 28, 2009#57
I like alfalfa sprouts.

Rods? Pistons?
Russelt3hPirateEpcot · Apr 28, 2009#58
Originally Posted by Tamago ↑
ok.. so high compression pistons from a prius will not work..
you have enough posts for me to believe you.

I guess since this isn't in the FI Forum we can't talk about low compression pistons?
ChinoCharlesOH · Apr 28, 2009#59
Originally Posted by Russelt3hPirate ↑
Chino have you found out pricing for Pistons/Rods/Bearings?
Sorry, totally forgot! I know there is a site out there that sells a rebuild kit for the 1NZ, and I want to say it was around 5 grand. 500 points to the first to find the link.
TamagoOff Grid · Apr 28, 2009#60
Originally Posted by ChinoCharles ↑
Sorry, totally forgot! I know there is a site out there that sells a rebuild kit for the 1NZ, and I want to say it was around 5 grand. 500 points to the first to find the link.
www.importperformanceparts.net
ChinoCharlesOH · Apr 28, 2009#61
No rods?
Russelt3hPirateEpcot · Apr 28, 2009#62
Originally Posted by ChinoCharles ↑
Sorry, totally forgot! I know there is a site out there that sells a rebuild kit for the 1NZ, and I want to say it was around 5 grand. 500 points to the first to find the link.
$5g's wtf.

you can rebuild a subaru motor for more than 1/2 that. wtf.

screw that, I think I'd rather blow up stock 1nz's and buy new ones everytime 🤣
TamagoOff Grid · Apr 28, 2009#63
Originally Posted by Russelt3hPirate ↑
$5g's wtf.

you can rebuild a subaru motor for more than 1/2 that. wtf.

screw that, I think I'd rather blow up stock 1nz's and buy new ones everytime 🤣
that's like 10 engines :D i say blow them.. cheaper than building them
ChinoCharlesOH · Apr 28, 2009#64
Well, that was for a setup that you could throw 25 psi at. THERE is your 10 second Yaris.
Russelt3hPirateEpcot · Apr 28, 2009#65
Originally Posted by ChinoCharles ↑
Well, that was for a setup that you could throw 25 psi at. THERE is your 10 second Yaris.
haha maybe in the 1/8th mile. 🤣

$5g's is stupid.
TamagoOff Grid · Apr 28, 2009#66
Originally Posted by ChinoCharles ↑
Well, that was for a setup that you could throw 25 psi at. THERE is your 10 second Yaris.
or build a big port 7 rib 4AGE for $3000 and run 30psi and make 450whp..
eTiMaGoBangkok, Thailand · Apr 28, 2009#67
can we at least try to keep this thread on topic of engine rods and not who is the biggest nimrod? thanks.
scapeBeaufort, South Carolina · Apr 28, 2009#68
running 13:1 from 10:1, constantly, is quite a leap. I would think a lot would have to go into this, or else they'd ship the yaris at this level anyways-- no?
a kit like this would need prius grade rod, crank, piston, and head; at the least...anyone see any totalled prius's lately? ;D
scapeBeaufort, South Carolina · Apr 28, 2009#69
not to mention the atkinson cycle engine tops out earlier, at a lower total rpm; running this setup in an otto cycle up to 6k rpms would probably push the mechanical limit of these materials
TamagoOff Grid · Apr 28, 2009#70
Originally Posted by scape ↑
not to mention the atkinson cycle engine tops out earlier, at a lower total rpm; running this setup in an otto cycle up to 6k rpms would probably push the mechanical limit of these materials
as i've already stated.. lol.. 🤷
cali yarisCanoga Park, CA · Apr 28, 2009#71
Post #20 seems to indicate that Prius pistons have been successfully swapped in and made a bit more power, but I can't tell for sure. Clarification from jouna on this point would be helpful.