Yarisworld Archive

What the Yaris community needs to take the Yaris to the next level

125 posts · 61,637 views · page 1 of 3

regalOriginal postPA · Apr 24, 2009#1
Note I didn't post in the wheels section because the focus there is mainly "how to drop your car and add big wheels to impress your friends." Nothing wrong with that but the Yaris has much more potential.

I'm a Honda convert due to the fact that Honda abandoned its lightweight hatch niche.

The Yaris has a lot of potential with its 2200 lb curb weight, I'd say more potential than anything new short of a Lotus or Miata.

Now the problem is there is no real hard data as to what mods give us.

I would love to see something like this : TRD suspension + sway bar+ sticky tires give .9x g lateral acceleration and 7x mph slalom.

With the old Honda's there were formulas you could follow and know your track results at least ballpark figures. Nothing put a smile on my face more than buying a clean 93 Civic for $3000 and adding a formulated $2000 tires/suspension that guaranteed 70+mph Slalom and .9 gs. Cars that can handle like this for cheap are special and just make the daily commute FUN.

With the Yaris I am about to install $1500 worth of "stuff" and I have no idea what it gets me other than a better stance.

We should push TRD and other vendors to start doing track results, or possibly the magazines.

This will be the first step in making the Yaris a true tuner car, it has everything going for it but needs to be taken to the next level. Right now I see the Yaris owners making it a show car, but there really is potential modding into a fun sports car. And don't tell me it is a lacking power econobox, 8 second 0-60 mph is more than respectable as a sports car over the last 35 years and there has to be some real performance handling gains to be had.

I plan on finding somewhere to have a slalom and lateral acceleration measured after upgrading my suspension this weekend, anyone know where this could be done in the mid-atlantic area?

Replies 124

mrbondIllinois · Apr 24, 2009#2
I. Agree. With. This. So much. I have held off on major cosmetic modifications and spent my money on suspension, tires, and the like for the effect you're talking about. I'll see if I can talk to one of my friends that works for Super Street magazine about doing something along the lines of Yaris track performance.
LorenSafety Harbor, FL · Apr 24, 2009#3
I've already pulled .98G average on a skidpad on street tires with bolt-on mods. You're right, the Yaris has lots of potential. The "formula" might not be readily available as it is in the Honda world, but the potential and the parts are available. Instead of following forumulas (that may or may not be right, suspension is a very personal thing), I prefer to do research and testing and learn how to set the car up for myself.

Believe it or not, this topic would fare better in the Wheels/Tires/Suspension forum. Nobody in the "General" forum cares. Yes, there are the "lower the car for looks" types there, but there are also some true performance and handling types there. We generally try to stay out of each other's way. 😆
eTiMaGoBangkok, Thailand · Apr 24, 2009#4
Agreed with Loren, it's better here 🙂

Well, from what I've noticed lurking around here so long (😆), the Yaris is a very new car without so much of an established record (at least in the US), compared to Civics... Call it what you want, but it seems it is very much an entry-level car, on which most of those who wish to modify it will only really be dabbling their toes, while only a relative few "heavies" will cannonball into the pool 😆 So yes, it's going to take a while to build up a proper high-level tuning community... I suppose it was the same when the Civics first came around in the US, who would have ever thought they'd be such an omnipresent force in motorsports? But we'll get there...

As for hard numbers... There was one magazine that, if I recall correctly, tested one of the manufacturer demo cars, I believe the Fujita Sedan, and went over 1G laterally... On my own very unprofessional testing (My head unit has an optional G-sensor to calculate a bunch of stuff on the fly, but no idea if it's truly accurate), I managed 0.95G's in a long fast curve...

We do have a basic "formula"... rear sway bar, good tires, dump some weight, springs/dampers or coilovers if possible, and you've got a very healthy chunk of the maximum grip you could achieve with the car, without spending a fortune on it (i.e. refer to that performance primer I wrote, and Tamago's handling guide 🙂)
TamagoOff Grid · Apr 24, 2009#5
i'm breaking my silence to say this:

if you want to take the yaris community to the next level:

INNOVATE, DON'T DUPLICATE

asking other members of the same car "what can i do to my car" will yield a few answers:

1. well i did a, b, c, d, you could do those
2. you gotta pay to play
3. it sucks there's no parts for "our cars"

the next level will come from innovation. Innovation comes from breaking the mold. quit buying bolt-on parts, and do something original. swap an engine, fit 9" wide wheels, get the car in a magazine once or twice. i know everyone likes to think that their car is "unique" but in reality.. without custom work (custom meaning one-off) it's a cookie cutter car. sure, buying $2000 wheels from jah-pan is "unique" because you didn't buy rotas, but just imagine where that money could have gone! toward innovation!

now: we all know why this will never happen. very few of 'you guys' bought a yaris simply to cut it up and make it different. i know there's the drift yaris, and a few actually quick yarii out there, but the average buyer of an econobox bought it because they either A: couldn't afford a bigger/better car, B: liked the fuel mileage, or C: genuinely liked the car at first sight. so that cuts out 2/3 of buyers right there. the person who fell in love with the car will be your innovator. he (or she) won't care about fuel mileage, won't care about possibly chopping a hood or notching a frame rail, if it means running a better powerplant.. so we'd better hope that all the "C" buyers paid cash for their cars and have another vehicle to get them back and forth. no? good luck getting to the next level.
TamagoOff Grid · Apr 24, 2009#6
lol and yes, my post is highly off topic for this thread :D
kngrsllSpartanburg, SC · Apr 24, 2009#7
With the new Tokico HTS coming out soon, we have an excellent set of high quality dampers coming our way. I think what we need next is the Yaris equivelent of "Ground Control" coilovers. I would love to get them to produce a sleeve coilover set. The Honda's that i knew about that handled best and would hand me my ass were usually running Koni's, Ground controls, and sticky tires. We have the dampers on the way from Tokico, now we need to push GC to bring an application for our car. This would give us the freedom to choose any spring rates we desire. Some custom upper mounts to give more stroke in the front and eliminate slop would be great as well, but that will take some R&D. We have sticky tires, wheel options, and a great community, so the pieices are there.

This is a GREAT thread btw, best ive seen in ages. I am intrested to hear what else you guys have to say.
tomatoSan Francisco Bay Area · Apr 24, 2009#8
To the OP: 👏 Great post!

I'm glad you posted in the general section because I might not have noticed your post otherwise. Your post makes a lot of sense, even to me, a lay person who doesn't know anything about mechanics, and very little about cars, but really, really, enjoys driving them 🙂.

I might spend the money and modify the car some, if I could find some data out there (not just "yo, do it man, cause it's rad") telling me what these mods do exactly, and how does the modified car handles compare to say, a Honda , or another car.

And for the record, I am, too, a Honda convert, for the same reason: Honda no longer makes a small, light hatch.
LorenSafety Harbor, FL · Apr 24, 2009#9
Originally Posted by Tamago ↑
lol and yes, my post is highly off topic for this thread :D
I was sort of thinking the same thing. 😉 Not at all the direction the OP was talking about.
regalThread starterPA · Apr 24, 2009#10
The main thing that made the original Rabbit the Hot hatch in the 80s was it was a budget car that could pull serious g's and slalom times. That car is sort of the mold-breaker that led to the modern Yaris.

I am not so much into expensive coil-overs and extreme modification. What peaks my interested is take $2000 buy A,B,C and pull 1g. Daily Driving 100% streetable car/go-carts are so much fun that the daily boring commute to work because the best part of your day.

I suspect the typical TRD setup gives a very good performance, but the crazy thing is no one has any numbers. If we had some real data, the industry world take notice and better improvements would be developed. Right now we are shooting in the dark, mainly because the OEMs sell us cars with comfort suspensions. All modern rides are riding on soft springs and shocks now-days, what really matters is how the car transforms with a proper suspension. The 240sx was considered a bland old mans car until people started replacing parts and bolting stuff on, now look at what you can do. The Yaris is still in that stage that the 240sx was in around the mid-90's.
supmetSouthern California · Apr 24, 2009#11
Originally Posted by regal ↑
Note I didn't post in the wheels section because the focus there is mainly "how to drop your car and add big wheels to impress your friends." Nothing wrong with that but the Yaris has much more potential.
With the old Honda's there were formulas you could follow and know your track results at least ballpark figures. Nothing put a smile on my face more than buying a clean 93 Civic for $3000 and adding a formulated $2000 tires/suspension that guaranteed 70+mph Slalom and .9 gs. Cars that can handle like this for cheap are special and just make the daily commute FUN.

I plan on finding somewhere to have a slalom and lateral acceleration measured after upgrading my suspension this weekend, anyone know where this could be done in the mid-atlantic area?
Really? I see a few show cars and big rim threads, but there are also a LOT of people running 15" konigs, ssrs, on other light weight rims. There are also good discussions on the handling of different springs, sway bars, etc.

I'm pretty sure there was a thread on here about 2 TRD vioses - I'm sure the skidpad, slalom, and other useful information is somewhere out there on them.(I know they were running on a track, so they SHOULD have all that anyway)

The other thing is, the show people which you seem to have something against, are doing more than anyone else as far as getting people to pay attention to the yaris. The more sponsors see yaris, the more likely they are to produce parts, and test the parts like you want.

Also, we'll have to see the world's reaction to garm's monster once he gets it fired up!
LorenSafety Harbor, FL · Apr 24, 2009#12
Huh? How much do you think you need to spend on a coilover kit?

I have about $950 in my coilover kit, $80 in a set of rear springs (I went stiffer than what came with the kit), and about $160 in a rear swaybar. Those are my suspension mods. That and a set of $89/each 15x7 wheels and a $400 set of tires. That's it. Less than $2000 for the whole works INCLUDING wheels and tires.

I'm not sure what your complaint is other than your lack of knowledge about what's available for the Yaris and how to set it up.

The typical TRD setup is just a mild street upgrade from the stock suspension, it's really nothing special. Not sure what you want for numbers. Slalom times? Skidpad numbers? You realize that those things are highly dependent on what tires are on the car and how well the car is driven, right? They are highly subjective measures. Nobody can say "put TRD springs, shocks and rear swaybar on your car and pull .9 G's" because the stock tires won't pull .9 G's. And guess what? You could put really good tires on the STOCK suspension and pull well over .9 G's.

You might be shooting in the dark... I'm not. 😉
regalThread starterPA · Apr 24, 2009#13
I appreciate and love the looks of the show cars with the $3k 18" rims (that rub) and 3" drop on soft springs. Just that obviously they won't perform well and that is not what I'm interested in. To me the big wheels and soft spring drops should be in the cosmetic section.

What I am interested in is what is the potential of the Yaris with $1k, 2K, etc invested with real data. I think this will only help the evolution of this platform.
anonymous userwindward oahu · Apr 24, 2009#14
Nice thread. I love reading the really few "quality" posts nowadays on this site. I considered transforming this car to a track car, but IMO, think it needs a lot of work. To compete against similar cars, or modifications past "tuner classes" would have the yaris destroyed. I'm quite interested in where this thread is going, and look forward to your build, sir. If I didn't have $50k invested in a current track car, I'd seriously consider this one, although a miata is very close to power to weight ratio.
I have done mods to make the car perform better, none of the "cosmetic" ones yet. I do have a set of coilovers coming though. 😎 I'll race the yaris this season for a bit while my wrx is being downed for work. We'll see how it does.

Best of luck to you.
BLAZINBLUEVITZNEW YORK · Apr 24, 2009#15
[QUOTE=regal;297821
What I am interested in is what is the potential of the Yaris with $1k, 2K, etc invested with real data. I think this will only help the evolution of this platform.[/QUOTE]

not trying to disrupt thread flow but in this country our platform is only 3 years old with a majority of its owners who post his/her findings on this website. we have a vast diversity in age between owners and this makes for some interesting reads and surprisingly helpful/informative threads. my point IS this car is not a CIVIC and if you want that kind of information your gonna have to trial and error yourself or just sit back like the rest of us and see what happens.

btw: TRD USA will not lift a finger to support us or from what ive seen any platform that is in the toyota brand. ive been trying that for the past 2 years now.......
TamagoOff Grid · Apr 24, 2009#16
so, to break 1.0G ........ buy a set of used Toyo R888's and mount them to an otherwise stock yaris.. $200 for 1.0G ?
LorenSafety Harbor, FL · Apr 24, 2009#17
Originally Posted by Tamago ↑
so, to break 1.0G ........ buy a set of used Toyo R888's and mount them to an otherwise stock yaris.. $200 for 1.0G ?
Sounds like a good "formula" to me, Tomago. 😁

Are we talking peak G's or average G's? That setup would easily be good for 1.2 G's peak... right before you tossed the car onto its roof. 😛
TamagoOff Grid · Apr 24, 2009#18
Originally Posted by Loren ↑
Sounds like a good "formula" to me, Tomago. 😁

Are we talking peak G's or average G's? That setup would easily be good for 1.2 G's peak... right before you tossed the car onto its roof. 😛
factor in a $160 swaybar then? and $24 for some camber bolts.. $60 for a custom alignment..

so, $444 to break 1.0G
YarisSedanCalifornia - Bay Area · Apr 24, 2009#19
We should just have all the professional auto X members post thier entire suspention setup and thier results. And it gives a good platform for people new to base thier setup on.
LorenSafety Harbor, FL · Apr 24, 2009#20
Do the alignment on the cheap (I've never paid to have my Yaris aligned). Slot the lower strut holes, no need for camber bolts.

Swaybar would be good.

Okay, let's clarify the formula and make it repeatable:
  • Slot front struts, set front camber to -1.8 degrees static (will be well over -2.5 on the outside when the suspension is compressed while turning), 0' toe. Total cost = $0.00
  • New set of 195/50-15 Toyo R888 on stock wheels. $123 each plus mount & balance. Total cost = $550
  • 23mm Rear Stabilizer Bar from MicroImage. Total cost = $164.95
1.0 G's easily for less than $800.
(do be careful with the aggressive transitions, though)
YarisSedanCalifornia - Bay Area · Apr 24, 2009#21
I remember when i used to work in a alignment shop cars would come in and they would specifically request not to touch thier camber even though it was negative only adjust the toe.

How much of a difference do you think the tire wear will be. Like 5 percent 10 percent 20 percent more wear?

Sure you should not be too concerned if you are going to be aggresive especially if you are going to auto x and go through tires very quickly.

But just from a curiouse standpoint as well for a daily driver im asking cause you are one of the few experience members when it comes to suspention. As there are other members who are strong on stereo etc..
LorenSafety Harbor, FL · Apr 24, 2009#22
Originally Posted by YarisSedan ↑
I remember when i used to work in a alignment shop cars would come in and they would specifically request not to touch thier camber even though it was negative only adjust the toe.

How much of a difference do you think the tire wear will be. Like 5 percent 10 percent 20 percent more wear?

Sure you should not be too concerned if you are going to be aggresive especially if you are going to auto x and go through tires very quickly.

But just from a curiouse standpoint as well for a daily driver im asking cause you are one of the few experience members when it comes to suspention. As there are other members who are strong on stereo etc..
This question has been answered before (many times). With modern tires, camber only affects tire wear noticeably if you do a great majority of your driving in a straight line without some aggressive cornering the balance it out.

Agressive TOE settings are what chew up tires. Toe PLUS camber is a bad combination, and will make it look like the camber is the problem, but it isn't. This is the typical situation when a car is lowered and not aligned. Most suspensions are designed such that camber goes negative when the car is lowered... side effect is that toe also goes WAY out of spec (goes out if the tie rods are on the back side of the axle, in if they're in the front). If you correct the toe to zero, as long as you're not doing cross-country interstate road trips and never exploring curves, that will take care of your wear issues.

If you're not the kind of driver who's going to push the car a little bit in the turns pretty regularly, you shouldn't even be reading this thread!
cali yarisCanoga Park, CA · Apr 24, 2009#23
Was there a lot of aftermarket support when the Civic had been out only 3 years?

I know the Yaris has been sold overseas for a number of years, but considering that the USDM is new, I think there is pretty good range of product support so far. Give it ten years... 😉
TamagoOff Grid · Apr 24, 2009#24
Originally Posted by YarisSedan ↑
We should just have all the professional auto X members post thier entire suspention setup and thier results. And it gives a good platform for people new to base thier setup on.
results are relative in autocross
TamagoOff Grid · Apr 24, 2009#25
Originally Posted by cali yaris ↑
Was there a lot of aftermarket support when the Civic had been out only 3 years?

I know the Yaris has been sold overseas for a number of years, but considering that the USDM is new, I think there is pretty good range of product support so far. Give it ten years... 😉
not to mention, the yaris has MORE AFTERMARKET than my car, and it's been out since 2000? (in japan)
CASTREXCosta Rica · Apr 24, 2009#26
Talking about Yaris potential... and a little off topic as well but,
People haven't put much attention to the
2ZR-FE swap due to the lack of appeal of it's not very impressive performance...

However, this power plant transforms the Yaris completely... and it should be pretty much a drop in swap if you can get a salvaged Scion xD engine and ECU. This should be easy in a couple of years.
The 1.8L will put down up to 125WHP and a very linear 120Tq with the current bolt on mods available (Intake/ exhaust/ UPulley).

I can tell you that people who jumps in for a ride on a twisty road on my car, can't believe what the little bean can do. And I'm not by any means a very skilled driver... just a little above the average I would say.

And I agree with Loren... No need to spend a lot of money on suspension...

$800 Tein Basics Coilovers
$150 TRD sway bar
OE 17" heavy ass Toyota wheels
$400 Azenis RT-615 (215/40/17)
$25 camber bolts

The extra TQ of this engine has no problem moving the heavy ass wheels and tires... But some light weight 16's are on my future plans.

2 attachments not included in this copy

TamagoOff Grid · Apr 24, 2009#27
Originally Posted by cali yaris ↑
Was there a lot of aftermarket support when the Civic had been out only 3 years?

what, 1979?

LMFAO
Kaotic LazagnaCentral Valley, CA · Apr 24, 2009#28
A magazine did a test with a Yaris sedan. They just used Tein SS coilovers and racing slicks. I think they pulled either 1.05 or 1.08 g's. No other mods, just the coilovers, rims, and tires.
TamagoOff Grid · Apr 24, 2009#29
Originally Posted by Kaotic Lazagna ↑
A magazine did a test with a Yaris sedan. They just used Tein SS coilovers and racing slicks. I think they pulled either 1.05 or 1.08 g's. No other mods, just the coilovers, rims, and tires.
back in 2007..


c'mon what's taking you guys so long? busy buying short shifters and underdrive pullies?
Kaotic LazagnaCentral Valley, CA · Apr 24, 2009#30
Being a college student. LOL. No money for anything, even REAL food.
TamagoOff Grid · Apr 24, 2009#31
Originally Posted by Kaotic Lazagna ↑
Being a college student. LOL. No money for anything, even REAL food.
🤷🤷 refer to my first post then?
Kaotic LazagnaCentral Valley, CA · Apr 24, 2009#32
Originally Posted by Tamago ↑
🤷🤷 refer to my first post then?
I wish I knew how to fab up my own stuff...
TOUGEghostKauai · Apr 24, 2009#33
So maybe I'm the only one who thinks this way, but I'm perfectly happy just bolting stuff on my Yaris, having fun with it, and not worrying about anything. I don't need numbers and data to convince me that my car is fun. I don't even care if some guy with a Scion and a turbo kit thinks he's better than me because of it. What is this "next level" anyway? It must be the place where my car can smoke Evos and still get 50mpg. 🤷
LorenSafety Harbor, FL · Apr 24, 2009#34
I sort of agree, I don't get too hung up on the numbers as long as the car does what I want it to do. Part of what I want it to do is handle well enough to be competitive (or at least damned frustrating to people with "faster" cars) in autocross and other events. The only reason I know the lateral G's my car can pull is that it was part of a competition that I did. Were it not for that, all I'd know is that "it handles really well".
ChinoCharlesOH · Apr 24, 2009#35
I this thread.

This community needs a few things:
1. Some exposure
2. More willing buyers
3. A viable piggyback tuning option
4. A formula and/or bolt on kit for reliable boost
5. Cheaper, more available upgrades geared toward 4: pistons, cams, head gasket, intake manifolds etc etc

For now Garm is going to be the blueprint. I'm trying to show what NOT to do (🤣) and the supercharged people can wave while the turbo people pass them. Sorry guys, but I truly think you're all crazy. 😉 Still love ya though.
TamagoOff Grid · Apr 24, 2009#36
so explain how garm is the blueprint, when none of you (arguably) will follow in his footsteps? and what about all the xa and xb "blueprints" floating around? i'm not tooting my own horn, just asking a viable question, since garm is basically just reverting to an xb/xa/echo powerplant...


??
ChinoCharlesOH · Apr 25, 2009#37
Its my personal belief that the Yaris is enormously more appealing than the xB and xA to modify, and that will run its course. If Toyota runs with this car for 5 years and enough current owners actually take them to the track, it'll make a little name for itself. Its kind of a big deal, the little Vitz.
ChinoCharlesOH · Apr 25, 2009#38
... of course, I say that looking through the rosy lenses of my YW glasses. 🙂 It may all be a pipe dream. Who cares, lets mod!
TamagoOff Grid · Apr 25, 2009#39
Originally Posted by ChinoCharles ↑
Its my personal belief that the Yaris is enormously more appealing than the xB and xA to modify, and that will run its course. If Toyota runs with this car for 5 years and enough current owners actually take them to the track, it'll make a little name for itself. Its kind of a big deal, the little Vitz.
and i agree, ON PAPER the yaris IS a better car. just don't open the hood or look at that ECU..


and yes, with a little support from toyota, you may see some good factory championships.. but the VITZ already did that, so why would toyota bother again? remember toyota's motorsports law?

"cheat til we get caught and penalized, the win, then quit"
ChinoCharlesOH · Apr 25, 2009#40
Yes, the ECU is an evil, evil mistress. Someone needs to kill it.
TamagoOff Grid · Apr 25, 2009#41
Originally Posted by ChinoCharles ↑
Yes, the ECU is an evil, evil mistress. Someone needs to kill it.
yes, but certainly none of us, let's all sit back and wait for the magic wand
ChinoCharlesOH · Apr 25, 2009#42
Us laymen with a little bit of money have to sit around and wait for a real tuner to get off their ass and figure this ECU out.

Wait, isn't that you? 😆 Get in the garage biotch! Whatchya waitin' for?
MorganPCB, FL · Apr 25, 2009#43
nothing can happen without someone stepping up and trying different things, even if they don't work or you got really really close and the shift cables were the issue.... you'll never know til you personally try something
TamagoOff Grid · Apr 25, 2009#44
Originally Posted by ChinoCharles ↑
Us laymen with a little bit of money have to sit around and wait for a real tuner to get off their ass and figure this ECU out.

Wait, isn't that you? 😆 Get in the garage biotch! Whatchya waitin' for?
if one of you lillyfooted yaris owners would loan me their car i'm sure i'd have that "professionally tuned" AEM FIC working just fine.




but none of you have




👏


🤷 excuses ?
TamagoOff Grid · Apr 25, 2009#45
Originally Posted by Morgan ↑
nothing can happen without someone stepping up and trying different things, even if they don't work or you got really really close and the shift cables were the issue.... you'll never know til you personally try something
i applaud you for actually saying "hell, it might work", spending the money, and are now able to say "hell, it didn't work"



but i'll guarantee that one of these blokes will disagree with you, even though you know first hand ;)
MorganPCB, FL · Apr 25, 2009#46
thanks, I tried... that was my contribution




....would have been awesome though... damn those tempting scion short gears...
LorenSafety Harbor, FL · Apr 25, 2009#47
I missed this one... Scion transmission fits, but shift cables don't? Did you try using the cables from the Scion? If they don't fit the Yaris shifter... did you try fitting the Scion shifter? Seems like a pretty small problem to deal with to reach a worthy goal.
MorganPCB, FL · Apr 25, 2009#48
Originally Posted by Loren ↑
I missed this one... Scion transmission fits, but shift cables don't? Did you try using the cables from the Scion? If they don't fit the Yaris shifter... did you try fitting the Scion shifter? Seems like a pretty small problem to deal with to reach a worthy goal.
ok well I tried fitting the transmission, sensors worked and bolted in, transmission mounted to the block but the rear engine stabilizer mount was missing on the scion trans because they have a different subframe... and the scion shifter cables are totally different that the yaris and the shifter assemblies are different...

so if you want the shorter scion gears dont fool around with installing the transmission just swap the gear sets and be done with it, if I had the actual gear puller this may have been a possible modification but I didn't so I cut my losses and returned the scion transmission

but yes I did make a blog post about this a few weeks ago when I tried it.... :)

least I know how the subframe goes in and out of the car know, always good to know - secret hit, its really easy I don't know why people mess with trying to do things from the top its like 6 bolts....
PETERPOOPOahu · Apr 25, 2009#49
Originally Posted by ChinoCharles ↑
and the supercharged people can wave while the turbo people pass them. Sorry guys, but I truly think you're all crazy. 😉 Still love ya though.
easy to say when you've bought a 500$ turbo kit, but is slowly falling apart. you still haven't dyno'd your car. let's see some numbers before you wave to an imaginary s/c yaris. 😉 But for a fact, you are definately putting down more whp. We are all just curious to see how much, and I highly doubt you'll be in the 13s on a 1/4. But good luck.

*when i retune with a larger tb/injectors, we might be seeing similar numbers if you don't upgrade your kit. 🤷
TamagoOff Grid · Apr 25, 2009#50
Originally Posted by PETERPOOP ↑

*when i retune with a larger tb/injectors, we might be seeing similar numbers if you don't upgrade your kit. 🤷

translation


*when i've spent a total of $5000, i'll surely have beat your $500 turbo kit




good job buddy