Replies continued
1NZYaris1New Zealand · Jan 18, 2010#51If you are using Garms Kit or any Ebay Kit
you need to do the following .
and if you want to use the Fog Light Stalk on the Steering Wheel
no wiring need s to be done inside the cabin
Garms Kit comes with the new relay in the picture and the little Red
lead that plugs into the under bonnet fuse box
the pics below are what i did to Garms Kit .👍
7 attachments not included in this copy
IsLNdbOiThread starterLas Vegas, NV · Jan 22, 2010#52Is there any harm in installing parts as they come?
I get the new stalk today and the relay on Tuesday next week. The fog lights are coming from Taiwan so I'll have those in a week or two.
I don't want to wait until I have everything so I don't end up with one big install.
CTScottUSA, CT · Jan 22, 2010#53 Originally Posted by
IsLNdbOi ↑ Is there any harm in installing parts as they come?
I get the new stalk today and the relay on Tuesday next week. The fog lights are coming from Taiwan so I'll have those in a week or two.
I don't want to wait until I have everything so I don't end up with one big install.
No problem with doing it piece by piece. Each of the three is part of a series circuit (so to speak), so until all three are in place it's an open circuit.
IsLNdbOiThread starterLas Vegas, NV · Jan 23, 2010#54There used to be some threads here on YW w/ pictures on removing the steering wheel, the stock stalk and then replacing the stalk w/ a new one. Can't find those threads anymore.
Anyone have links to or have the pics. from those threads?
CTScottUSA, CT · Jan 23, 2010#55 Originally Posted by
IsLNdbOi ↑ There used to be some threads here on YW w/ pictures on removing the steering wheel, the stock stalk and then replacing the stalk w/ a new one. Can't find those threads anymore.
Anyone have links to or have the pics. from those threads?
Take a look through the cruise control threads. I believe in one of them that there are some good pics of removing the steering wheel.
1NZYaris1New Zealand · Jan 24, 2010#56 Originally Posted by
IsLNdbOi ↑ There used to be some threads here on YW w/ pictures on removing the steering wheel, the stock stalk and then replacing the stalk w/ a new one. Can't find those threads anymore.
Anyone have links to or have the pics. from those threads?
Here you go here is the toyota PDF
for Steering wheel fitting /Removing 👍
1 attachment not included in this copy
IsLNdbOiThread starterLas Vegas, NV · Jan 24, 2010#57Thanks guys. The part of the process I'm actually looking for is removal of the original combination switch and installation of the new one w/ the fog light control.
CTScottUSA, CT · Jan 24, 2010#58 Originally Posted by
IsLNdbOi ↑ Thanks guys. The part of the process I'm actually looking for is removal of the original combination switch and installation of the new one w/ the fog light control.
That's the easy part. Once the wheel is off, there are just two plastic tabs that hold the switch. You release those and pop the connector.
IsLNdbOiThread starterLas Vegas, NV · Jan 27, 2010#59Got the fog light kit yesterday and I'm not happy with it. On my '07 LB, each fog light mounting hole / spot had two slits where the tabs on each fog light would slide into while the other side would be screwed in.
Picture not included in this copyPicture not included in this copy
So, the fog lights for the '07 would have two tabs on each side. On my '09 5-door LB, each fog light mounting hole / spot has one slit where a tab on each fog light should go. The fog lights that came with this kit has two tabs on each side just like the ones for the '07 / '08 LB. For them to fit properly, they should have only one tab on each side. The tab on one side would insert into the slit on the mounting hole and the tab on the opposite side would be screwed into the screw hole on the mounting hole. So, once I installed these fog lights there was a noticeable gap b/w the lights and the bumper. Also, the top edge of the fog bezels pop out a little bit so there's a slight gap b/w the top edge of the bezels and the bumper. I already checked and all the tabs are pushed all the way in, securing the bezels. I don't recommend this kit.
cali yarisCanoga Park, CA · Jan 27, 2010#60I believe the gap is common to all, not just the 2009 and up.
spookzSydney, Australia · Jan 27, 2010#61The tiny gap is probably so that the heat from the foglamp glass doesn't melt the bezel plastic..
As for the tiny gap on the top edge of the bezel and the bumper, that's normal. I have genuine '09 bezels and they too leave a tiny gap.
IsLNdbOiThread starterLas Vegas, NV · Jan 30, 2010#62I don't remember there being gaps like this on my '07 LB. Here are some quick pics. I took:
Picture not included in this copy
Picture not included in this copy
RevssonSoutheast Wisconsin · Aug 20, 2010#63 Originally Posted by
CTScott ↑ I believe that you can use either the 06-08 (84140-52150) or 09 (84140-52151) versions. TRDsparks sells the 06-08 one for $77. The difference may just be in labeling like the wiper stalk I put on mine. I bought the older version of the Prius wiper stalk and it has text on it, whereas the newer version just has the symbols.
The other place to try is the junkyard that I bought my wiper stalk from (for $50 vs ~$100).
http://autoworksinc.com/
Hey CTScott -
Sorry to dredge up an older post, but when you ordered from this junkyard,
did you specify the part number or just the Prius wiper stalk with fog switch? 🤷
I don't know if I have the guts to take off the steering wheel to do this, 🙁
but that junkyard isn't too far from me, and I have a buddy that lives in the
Madison,WI area. I ordered the fog light kit from Garm, and might just put
the switch that comes in the kit for now.
CTScottUSA, CT · Aug 21, 2010#64 Originally Posted by
Revsson ↑ Hey CTScott -
Sorry to dredge up an older post, but when you ordered from this junkyard,
did you specify the part number or just the Prius wiper stalk with fog switch? 🤷
I don't know if I have the guts to take off the steering wheel to do this, 🙁
but that junkyard isn't too far from me, and I have a buddy that lives in the
Madison,WI area. I ordered the fog light kit from Garm, and might just put
the switch that comes in the kit for now.
He had the part number listed, so I checked that out. The Prius wiper stalk works on the Yaris, but the headlight stalk does not, as it has different connectors.
Originally Posted by
BLAZINBLUEVITZ ↑ STALK: 84140-52151
RELAY: 90080-87026
SHROUD LH: 81482-52260
SHROUD RH: 81481-52330
I want foglights on my 2010 Sedan, and want to confirm these part numbers are also valid for my car.
Oh, and is there an OEM toyota part number for the foglight wiring harness? I assume that with the new foglight stalk, there is no need for an interior wiring harness.
1NZYaris1New Zealand · Sep 27, 2010#66 Originally Posted by
mari ↑ I want foglights on my 2010 Sedan, and want to confirm these part numbers are also valid for my car.
Oh, and is there an OEM toyota part number for the foglight wiring harness? I assume that with the new foglight stalk, there is no need for an interior wiring harness.
Ifyou get the latest kit from Micro Image (a sponsor of this site )
everything is in the kit apart from the OEM Stalk
which is not required , and the whole kit is nplug and play 👍
thanks... kit price is excellent for the wires and covers, but I like the oem stalk (its only $90 online!) and my own lights (visionx solstice LEDs).
SimTronikSts-Anges, Quebec, canada · Oct 1, 2010#68Just installed my fog light kit and i just noticed gaps like that. Do i need to order the original toyota bezel? Very disapointed. Help!
Originally Posted by
IsLNdbOi ↑ I don't remember there being gaps like this on my '07 LB. Here are some quick pics. I took:
Picture not included in this copy
Picture not included in this copy
CTScottUSA, CT · Oct 1, 2010#69My genuine Toyota ones fit properly around the outside, but have the same gap around the lens (which may be intentional to avoid melting the plastic).
SimTronikSts-Anges, Quebec, canada · Oct 1, 2010#70Where can i get some genuine ones. are they expensive? Only the bezel.
CTScottUSA, CT · Oct 1, 2010#71 Originally Posted by
SimTronik ↑ Where can i get some genuine ones. are they expensive? Only the bezel.
Read above in the thread for the part numbers. They are about $26 each from your local dealer.
chrisjS. Jesus, Kentucky · Oct 4, 2010#72I got the MI kit for my '09 and had them professionally installed. There is the slight gap right above the fog light bezel on each light.
1NZYaris1New Zealand · Oct 4, 2010#73😳 I have sold 2 09 hatch MI kits to my local toyota branch
and they are stoked , with quality and fitment 👍.
thaonguyendallas, tx · Dec 23, 2010#74i did everything in the directions and it wont seem to turn on :( when i look at where the connector plugs into there doesnt seem to be anything that even plugs into the yellow wire so could something be wrong? or could i just buy the oem switch and ill have nothing to worry about?