Yarisworld Archive

water temp gauge

11 posts · 7,674 views

llimonceOriginal postvenezuela · Apr 19, 2009#1
I need a water temp gauge .. any one ?? any ideas ??

Replies 10

cali yarisCanoga Park, CA · Apr 19, 2009#2
1. Buy one.
2. Install it.

no really, kidding aside, just pick a good brand, like Autometer.
llimonceThread startervenezuela · Apr 19, 2009#3
the auto meter comes with de sensor and wires ?? excuse my english
cali yarisCanoga Park, CA · Apr 19, 2009#4
YES, any good brand will come with everything needed to install it.
yaris-meAnaheim, CA · Apr 19, 2009#5
The easy way is a Scangauge II. Microimage sells it.
LtNoogieWest Hills, CA · Apr 19, 2009#6
ScanGauge as mentioned above will give you water temp and much more.
cali yarisCanoga Park, CA · Apr 20, 2009#7
^ true, and water temp is not data that needs a super fast response.
changchewsoonMalaysia · Apr 20, 2009#8
You may also take a look at the Pivot Super Temperature Controller, it comes standard with a sensor. You could wire your car's water temperature the the controller, and you're able to monitor water temp directly through the car's on board sensor and also control the activation of the radiator fan to your preferences.

Then, with the extra sensor you can use it to monitor your oil temperature as well, because the controller provides an additional channel to monitor oil temp. So you get oil temp and water temp + fan control in 1 unit.

Retails around 130-150 USD if not mistaken, at least thats the selling price back here in our country.

Alternative, any OBD II scanner like the Greddy Informeter Touch or the Scangauge will do. At least the return on your investment in one of these units are higher as you could display a lot of other info as well and you could do a DTC scan and reset for check engine lights.
llimonceThread startervenezuela · Apr 21, 2009#9
thanks guys !!!
j2ipRichmond Hill · Jun 1, 2009#10
Originally Posted by LtNoogie ↑
ScanGauge as mentioned above will give you water temp and much more.
How do you like your ScanGauge? I am looking for one how is it work? Is that easy to install?
botchilahPhilippines · Jun 2, 2009#11
+1 on the Scan Gauge. The readings it displays will be what matters anyway.

Problem with most aftermarket temp gauges is that these tend to read higher than what your car's ECU and sensors will read. DEFI, which I have some experience with, can read as much as 7 degrees celsius higher than what the ECU sees especially on cooler temps. As the temp reading gets closer to 100 degrees celsius, the discrepancy is less, like 2-3 degrees celsius off. This is basing it off a datalog from an AEM EMS and an Apexi Power FC stand-alone ECU that have laptop tuning and logging functions, versus logs taken from a DEFI BF series gauge that have internal memory logs for a couple of seconds / minutes.

GReddy and HKS gauges also read a bit higher, though not as much as the DEFI ones from my own experience and from research on users of these gauges. A lot of hard core track guys who run high HP cars all seem to agree that the Autometer gauges read closest to what the ECU and OEM sensors will see.

But the Scan Gauge allows you to measure so much more parameters for the price of just one or two of those gauges.