Yarisworld Archive

Blitz Supercharger Sets CEL

14 posts · 5,471 views

whooppee777Original postMaryland · Apr 18, 2009#1
So i was at WOT last night, cant remember which gear i believe it was third when all of a sudden the CEL started flashing and then turned solid until i promptly got it home and checked the code with a scan gauge. P0302 which if i am not mistaken is a misfire in the 2nd cylinder.

it hasnt come back since but i have a feeling it will at some point the next time i go ballz to the wall.

im assuming the fuel system is struggling to provide the necessary fuel.

whats everyones take on this?

Replies 13

whooppee777Thread starterMaryland · Apr 18, 2009#2
i used the supplied clips. i'll have them soldered sometime in the near future.
cali yarisCanoga Park, CA · Apr 18, 2009#3
Blitz recommends soldering the wires - I think they should say that up front when you install the kit, instead of supplying crimp connectors!
cali yarisCanoga Park, CA · Apr 18, 2009#4
I think you're right -- but now that we're having problems they recommend soldered connections. I think that's their way of 100% eliminating a possible cause (bad connections) more than anything.
firemachine69Sudbury, On · Apr 18, 2009#5
I'll assume you're running premium fuel?
Nexus1155Dorchester · Apr 18, 2009#6
LOL never use crimps for something like this. Even twisting them and using electrical tape is better!!!
whooppee777Thread starterMaryland · Apr 18, 2009#7
Originally Posted by firemachine69 ↑
I'll assume you're running premium fuel?
ofcourse.

i think i'll meet up with kcalb when he does his install of his s/c and redo my wiring
LtNoogieWest Hills, CA · Apr 19, 2009#8
You know what's really strange? Today, I was showing off my new data logger to my brother-in-law and went full boost up the street and threw a CEL for cylinder 2 misfire. The CEL light flashed a couple of times and when I let up on the throttle, the CEL went away.

I took the valve cover off this weekend and took the fuel rail off so maybe I did not put something back together correctly.
s3r3nityHull, QC · Jun 1, 2009#9
are you guys still seeing some P0302 CEL's ?

for my part, looks like i'm getting em when i hit the rev/limmiter or the fuel cut-off @ top speed..

were you guys seeing it also in the same situations? or in the lower rev range ?
LtNoogieWest Hills, CA · Jun 1, 2009#10
I have not seen those since my previous post.
s3r3nityHull, QC · Jun 1, 2009#11
i did the install myself and soldered everything.

but if i dont hit the rev limitter @ 6500 then i dont get the cel.. it's really only when i'm .2sec off my shift or when i dont want to shift and keep it at 6500 without changing (auto-X situation) if i hit the limiter i start getting the flashing CEL.. if i lay off and just keep light throttle it then goes away.. or can just erase it..

was mostly wondering if you guys were seeing it in that situation.
whooppee777Thread starterMaryland · Jun 22, 2009#12
soldered my wiring and now everything runs fine
PETERPOOPOahu · Jun 22, 2009#13
no shrink wrap? ;)
whooppee777Thread starterMaryland · Jun 24, 2009#14
definitely shrink wrapped