^Well Im saving for my new wheels and springs. Not going to go turbo for a while, but will save alittle each month for it. Maybe in a year ill go turbo. So not much mods on my end but I see others are really looking good! Too bad you wont be here for the meet and greet.
General Discussion 808 Thread
714 posts · 112,950 views · page 6 of 15
Replies continued
yeah that kinda sicks but im pretty sure you guys will have another one but gotta go japan for find one jdm belta cause i need the dash and stuff for convert over to right hand and no go springs go air cause they very close in price for air not air runners but another good place for the price of like a coilover system you can slam some air
I want to go air, maybe in the future.
well pic one of not a final set up for the yaris but a mocked up one then changed the design after i finished cause i never liked how it looked the turbo set up in my garage
turbo toyotas has a turbo kit for the yaris. any comments?
^ you got a link for that? I know Toyota Japan has a turbo Yaris from factory.
good system i had them on my tc before i changed em up the fitment is dead on and the intercooler needs a little fitment to the front crash beam nothing major
they dont make it anymore, just the manifold.
they still do make em
here's the link http://www.turbo-kits.com/yaris_turbo_kits.html
It says that you have to trim the factory crash bar though...
It says that you have to trim the factory crash bar though...
btw peter if you want to sell your nur spec exhaust, someone's interested in buying it.
he commented on your thread for your exhaust.
he commented on your thread for your exhaust.
I love my coilovers! Teins rock! Just thought I would post a thought on this thread.....
ah sorry, i thought you were referring to a different site. the site i was talkin about only makes the manifold now.Originally Posted by 808_Yaris ↑here's the link http://www.turbo-kits.com/yaris_turbo_kits.html
It says that you have to trim the factory crash bar though...
yah the website you prodivded has been shown abunch in the past with people asking about it. People said it should work, but it doesn't come with a fuel management.
hey thanks. i am already quoting shipping for someone soon, then if it's too much, i got a person in hawaii whos next.Originally Posted by 808_Yaris ↑btw peter if you want to sell your nur spec exhaust, someone's interested in buying it.
he commented on your thread for your exhaust.
coilovers ARE awesome. i love my cuscos.Originally Posted by fuji ↑I love my coilovers! Teins rock! Just thought I would post a thought on this thread.....
did you get them installed at munkwurks again? and what was the problem with the rear end making the noise? Were they cranked all the way down?
how much does fuel management cost approximately?Originally Posted by PETERPOOP ↑ah sorry, i thought you were referring to a different site. the site i was talkin about only makes the manifold now.
yah the website you prodivded has been shown abunch in the past with people asking about it. People said it should work, but it doesn't come with a fuel management.
well thats the thing that everyone is always referring to when having to "tune" the kit.Originally Posted by 808_Yaris ↑how much does fuel management cost approximately?
There is:
AEM FiC: $350? around there. Not as expensive, however, garm and 3 others were unsuccessfull when trying to tune their kits with it. BUT, evan supposedly tuned his custom kit with an AEM FiC and had success with it. He's tuned like 3 other cars with it I believe, so he is probably pretty good with it.
Greddy Emanage blue: $350? around there? the ZPI kit used this and it's the management that chinocharles is using on his used turbo kit (ZPI) that he picked up recently. It works, but a lot of people say that thing is crap.
Greddy Emanage Ultimate: $600-700$? The is a step up from the emanage blue. I don't know the difference,but supposedly this one is better than the blue. (This is the one I am going to use to tune.)
Kiwisquirt (or something like that?): price?? noone with a yaris has used this one
Fcon (or something?): price?? expensive management that noone has used yet, i think.
Then there are standalones that you take out your ECU and use those to completely replace it.
which expensive one does garm have now?
off to get my exhaust!!
^sweet, post pics when you get it on!
AEM EMSOriginally Posted by 808_Yaris ↑which expensive one does garm have now?
Engine Management Stand Alone.
Lol what was the price of that again?
I think it's like 2k-3k. Not sure which one he got. Not sure if they made one for the yaris, or if he used one for a xb/xa/tc? not sure.
Damn so pricey!! You could build twin turbo with that money
If you had turbo already.
If you had turbo already.
i'm detailing my car. Going to clean the wheels soon. getting ready for our meet.
But our meet is a long time away lol
i know! ahahaha
OR, You can send your ECU to a tech tuner in Japan for about 800 bucks and have the Limiters removed on your ECU and have it uploaded with a better engine map. Better yet, run 2 ECU at once if you have the programming knowledge. Plenty of different options lol
i seeee, good to know that there are many options 😛
difference between emanage and emanage ultimate is that the ultimate can go more in deept to tuning the the emanage blue can also the ultimate will allow you to run on map based and remove the maf sensor completely as it sends the signal to the computer tricking it. the ultimate also allows you to build a street map and a race map and flip a switch and the map is used which ever you want. the aem fi/c is able to tune the factory maf sensor to be able to run with non factory based turbo engines and or still cancel the maf out and run only on the map sensor. so the two ultimate and aem fi/c are comparable to each other but is able to tune differently
thanks for clearing things up!
how's the tune doing? still holding up? ecu not learning around it?
how's the tune doing? still holding up? ecu not learning around it?
well see the tune is still holding the learning part thats never going to happen i dont understand why peepo keep saying that the tunes wont hold when they ran into the same problem with the tc and they figured a way around that so idk what evers if it does stumble then i guess i re wire this car and run the yaris map on a hydra system for the tc and just run it that way. but so far so good knock on wood. im going to try a bigger turbo this weekend to see if it will lag or whats the deal with it
I saw a Blazin Blue yaris at swap meet yesterday hahaha. looks like magnaflow exhaust shark fin antenna an vitz emblems. Anyone here?
Peterpoop, did you sell your exhaust already?
not yet. the guy who was next in line before you is going to buy it, supposedly. he's paying 50$ to have it shipped to him. he's going to pay me next friday. if he changes his mind, i'll let you know.Originally Posted by yarisugi ↑Peterpoop, did you sell your exhaust already?
$50?!? where is the guy from?
canada
Uploaded a video of my intake!
Dude I saw 808 yaris today by kahala mall
was at taka's house today lol Traded shift knobs. I think the 09 shift knob is cooler than the 07 but taka likes the 07 ones better. says it looks more TRD than stock hahaha. I also Converted my little Auxilary jack That I don't even use anymore into a switch to turn off the friggen seatbelt warning when I put the harness on
yup saved me from buying the $50 TRD knob.
Yeah I'm always around there. I saw a glimpse of you while I was turning lolOriginally Posted by gwasabi ↑Dude I saw 808 yaris today by kahala mall
wow this whole conversation about the shift knob just made me realize i need to change mine
Hahaha Eventually I was planning on getting a Top Secret Shift knob just for kicks hahahaha
Just saw the Nissan Cube. Very odd looking car, but probably gonna be the next big hit.
for all you waiting for a intake manifold heres something worth the wait weapon r will be releasing a neo ti version of there intake that looks like this when they release there actual intake in december i roll with a prototype one it doesnt have the flange at the end i had to mount my own
Picture not included in this copy
Picture not included in this copy
Looks really titanium-ish.Originally Posted by battleversiontc ↑for all you waiting for a intake manifold heres something worth the wait weapon r will be releasing a neo ti version of there intake that looks like this when they release there actual intake in december i roll with a prototype one it doesnt have the flange at the end i had to mount my own
Picture not included in this copy
Just got back from a nice early morning drive to mokuleia and back. Wanted to eat at bigway burgers but they closed? Even wendy's is closed in wahiawa?
WTF?? I haven't been to the mokes in like 8 years. Nice area, I wanna move there.
WTF?? I haven't been to the mokes in like 8 years. Nice area, I wanna move there.
come on down.
nitrogen enriched oxygen is a way to treat the titanium to be more heat resistent and more durable