Yarisworld Archive

More Cold air

27 posts · 5,915 views

hatchbackkid82Original post. · Apr 15, 2009#1
Just wanted to see if you guys thought this would be a good idea. I don't know how familiar some you guys are with the 96-00 Civics(ex-honda guy). But i remember seeing a few Civics running around here in MD with 3 inch holes drilled right into there front bumpers. This hole sat a few inches from where the CAI filter was located. It was far enough to still draw in more cold air but still kept it safe from the elements. What do you guys think good idea or no🤷. I was just thinking about it. I highlighted the area i was thinking about in the yaris. I currently have a AFE intake the hole would sit right under the filter. Just want to get some opinions

1 attachment not included in this copy

Replies 26

ddongbaphay · Apr 15, 2009#2
In my ABSOLUTE honest opinion, a stock engine isn't going to make great use of the colder air.
hatchbackkid82Thread starter. · Apr 15, 2009#3
Hmmmmmm yeah i guess your right.
mastaofdisastaamerika · Apr 15, 2009#4
for me to cut a whole 3 inches wide in my front bumper itd have to be something that gave me at least 30hp. If it was a civic id do it, but its more than that, its a yaris. But yes in theory it would deliver more cold air, but you wouldnt notice a diffrence. so dont lol
supmetSouthern California · Apr 15, 2009#5
Why not do the DIY fog light cover to air intake/brake vent conversion? Effective and you don't have to cut a whole in your bumper

$10 mods...
eTiMaGoBangkok, Thailand · Apr 15, 2009#6
lil scoop on the hood to ram some air in there could do it too 😁
hatchbackkid82Thread starter. · Apr 15, 2009#7
😆 people relax..... ok i won't do it😁, just wanted to get some opinions. also these civics were N/A monsters with crazy mods done. The brake duct things sound cool but i want fog lights
hatchbackkid82Thread starter. · Apr 15, 2009#8
Hood Scoop!? what am i driving a pontiac😆.

Originally Posted by eTiMaGo ↑
lil scoop on the hood to ram some air in there could do it too 😁
MouseMiami, Fl. · Apr 15, 2009#9
I'm open to holes in the front bumper....a lot of miata guys do it....I'll probably do it at some point. Guys with 350Z's do it also. Granted the increase will most likely be unnoticable. But an increase is an increase. Especially in a car that just about puts 90hp to the ground.
PETERPOOPOahu · Apr 15, 2009#10
Not even 90hp to the ground. :)
severous01SE Texas · Apr 15, 2009#11
y not jsut remove the headlight? i'm assuming u take this to the track?
MouseMiami, Fl. · Apr 15, 2009#12
More like 80?
BLAZINBLUEVITZNEW YORK · Apr 15, 2009#13
Originally Posted by Mouse ↑
More like 80?
if that.....
hatchbackkid82Thread starter. · Apr 15, 2009#14
I will but, i'd rather not go through the trouble once i'm there😁

Originally Posted by severous01 ↑
y not jsut remove the headlight? i'm assuming u take this to the track?
at3GGVA Beach · Apr 15, 2009#15
wouldn't you rather have -1 HP than a big hole in your bumper?
hatchbackkid82Thread starter. · Apr 15, 2009#16
The whole would only 2-3 inches across. some people don't mind it
at3GGVA Beach · Apr 15, 2009#17
huh...well more power to you, keep us posted. At least its original! (for the yarii anyway)
Red HorseCosta mesa, California · Apr 15, 2009#18
I've seen some cars they put several round hole on the rear bumper
severous01SE Texas · Apr 15, 2009#19
Originally Posted by hatchbackkid82 ↑
I will but, i'd rather not go through the trouble once i'm there😁
u lazy bum. i can get that headlight out in about 2 minutes once i get my handy screwdriver out.

but, if you do this, you should check out velocity stacks. they're for turbos. you can make it look like u got a turbo inlet right there...how cool would that be.
BLAZINBLUEVITZNEW YORK · Apr 15, 2009#20
Originally Posted by severous01 ↑
u lazy bum. i can get that headlight out in about 2 minutes once i get my handy screwdriver out.

but, if you do this, you should check out velocity stacks. they're for turbos. you can make it look like u got a turbo inlet right there...how cool would that be.
does our liftback headlight have a spot for a HID ballast....
hatchbackkid82Thread starter. · Apr 17, 2009#21
I've seen these too, Rear difuser, i wouldn't do this lil' over the top

Originally Posted by Red Horse ↑
I've seen some cars they put several round hole on the rear bumper

1 attachment not included in this copy

Red HorseCosta mesa, California · Apr 17, 2009#22
Im wondering what is this for?




Originally Posted by hatchbackkid82 ↑
I've seen these too, Rear difuser, i wouldn't do this lil' over the top
MouseMiami, Fl. · Apr 17, 2009#23
It's for the air to pass through there instead of hitting the inside of your back bumper. A lot of import(civics) drag cars do this....it's a way to decrease drag.
hatchbackkid82Thread starter. · Apr 17, 2009#24
I wouldn't do this on a street car, unless i had civc ek with a k20 cylinder head and k24 bottom end
jounabayamon puerto rico · Apr 22, 2009#25
i'm sick of seeing yaris arond here with holes and 3'' trumpets sticked in the bumper... oldest trick in the book. but the trumpet in the side looks cool its like you have a monster inside and thats the mouth lol a 90hp something monster jaja
d1nzfeasia · Apr 24, 2009#26
Originally Posted by Mouse ↑
It's for the air to pass through there instead of hitting the inside of your back bumper. A lot of import(civics) drag cars do this....it's a way to decrease drag.

how much difference are we toking about?
justjesusOrange County · Apr 24, 2009#27
Originally Posted by eTiMaGo ↑
lil scoop on the hood to ram some air in there could do it too 😁
Yup. I've been toying with the idea in my head since Garm had the Hood Design contest! maybe someday...

As far as having a hole in your bumper, it's all up to you man! Personal preferance. I always say, "To each their own."

The C-One bumper has a hole in it. It doesn't look too bad. That's just my opinion though. 🤷

Ahh. too lazy to post the pic. But here's a link to Micro Image thread with the pics of various kits.
Link to a thread or page that is not in the archive