Yarisworld Archive

Question about HID for 07 Yaris

16 posts · 3,414 views

chinoken503Original postOregon · Apr 10, 2009#1
Hi everyone, I am new to yaris world, and I was wondering if I should get Single Beam HIDs for my 07 Yaris? If i do get it and install them, what would happen if try to turn on my high beams? Also I've been looking at some HI/LO HIDs (Not BI-Xenon) and I don't know what to get? Any advice is greatly appreciated.Thanks

Replies 15

Kaotic LazagnaCentral Valley, CA · Apr 10, 2009#2
Get a single-beam. The hi's on mine are about as useless as using a dirty rag towel to wax my car.
chinoken503Thread starterOregon · Apr 10, 2009#3
What would happen if i get a low beam and i turn on the high beam? Would the HID blow?
Kaotic LazagnaCentral Valley, CA · Apr 10, 2009#4
Originally Posted by chinoken503 ↑
What would happen if i get a low beam and i turn on the high beam? Would the HID blow?
There should not be a high beam bulb. So I don't think anything will happen. hehehe. My HID low and halogen Hi has two bulbs. The halogen bulb is right next to the HID bulb, very small, and very useless.
chinoken503Thread starterOregon · Apr 10, 2009#5
So you purchased one of those HI/LO bulbs with an HID low and halogen HI that are fitted right next to each other? So if i get a single beam HID bulb and turn on high beam it should do nothing?
AlainMikliSF, CA · Apr 10, 2009#6
Originally Posted by chinoken503 ↑
What would happen if i get a low beam and i turn on the high beam? Would the HID blow?
if you using a single beam HID, if you turn on the High Beam, may be everything will turn off.

my friend's has a fits after install hid, the high beam will turn off everything~

but after some wiring he seems to get rid of it, nothing happen when turn on the high beam~
chinoken503Thread starterOregon · Apr 10, 2009#7
So turning on the high beam will turn off the Low beam HIDs when enabled if i only have a single low beam?
Kaotic LazagnaCentral Valley, CA · Apr 10, 2009#8
Originally Posted by chinoken503 ↑
So you purchased one of those HI/LO bulbs with an HID low and halogen HI that are fitted right next to each other? So if i get a single beam HID bulb and turn on high beam it should do nothing?
Well, not necessarily, like the comment above, things just might get dark. Our cars shut off the low beams when the high beams are turned on. On my kit, there are two cables, one for the high and one for the low (HID), so if there is no cable for the high, there will not be a place for the power/wattage to go to/diverted to, so, nothing happens, nothing turns on.
chinoken503Thread starterOregon · Apr 10, 2009#9
hmmm i c, I guess i will have to look and see how my wiring is like.
chinoken503Thread starterOregon · Apr 10, 2009#10
thank you everyone for your advice
IllusionXBrossard, QC · Apr 10, 2009#11
but why don't you just get a bi-xenon? or Hi/Lo HID...
AlainMikliSF, CA · Apr 10, 2009#12
Originally Posted by IllusionX ↑
but why don't you just get a bi-xenon? or Hi/Lo HID...
bi-xenon s super expensive..................
chinoken503Thread starterOregon · Apr 10, 2009#13
bixenons are super expensive, i'm just worried about where the voltage and current will go when i turn on my high beam, i don't really care for high beam i rarely used them.
lilredrocketDFW, Texas · Apr 11, 2009#14
Read this bixenons are not that bad and they are proven by many members on here.

Link to a thread or page that is not in the archive
IllusionXBrossard, QC · Apr 11, 2009#15
bi-xenon use no more power than any other HID kits..

it's simply 1 HID bulb with an actuator behind to move it back and forth. Most be-xenon kit sold on ebay have this cover on the bulb, it helps blocking the extra lights that glare.

117$ is not expensive


http://cgi.ebay.ca/8000K-Bi-Xenon-H4...3A1|240%3A1308
GiobateraCoral Springs, FL · Apr 11, 2009#16
I have a regular HID kit and works just fine. I just don't have the high beams. The only thing that happens if you turn into high beams on this case is that it won’t be any light at all. Honestly, with HIDs you just DON"T need high beams! 🤷