jonismynameOriginal postadirondacks, ny · Apr 7, 2009#1i want driving lights. well, i have driving lights, mounted hanging from the upper lip of the lower grill. this is too low. i also used smaller rectangular lamps in my attempt to keep it small. i don't like those.
i want 7" lamps. big gawdy ones that light things up. hella makes some great 7" driving lights, and even a few very nice 4" or so setups.
has anyone ever mounted these on a yaris? other than the rally car with a specific molded piece above the grill?
has anyone deeply considered modifying the grill, to recess a set of wonderful driving lights?
the problems i see-
-weak mounting (bumper cover material) due to the constant slope of the front end
- anything will stick up and out
light enough lamps should be okay with the mounting issue... my smaller maps have no issue..
but the sticking out too far thing, i don't quite know how to fix that.
im thinking, new grill, cut holes, mount less huge lamps inside the grill? or at least 1/2 way into it so they're sitting behind a bit? then i could mount to the actual bumper?
HB grill for $28-
http://www2.partstrain.com/basket.ph...9920733-853290 any idea's?
i also have other options- projector driving lights that are ultra small
http://store.summitracing.com/partde...rt=GTE-64631-5 maybe with a HID kit down the road?
or i could go with depo headlamps with a HID kit?
i just dig big bright lights, and do a fair amount of back road driving (deer season...)
Replies 22
jinxorSydney, Australia · Apr 7, 2009#2Architect is running depo with hid's... there is a thread about it.... have a search...
More light can be taken from the fogs with hid... so, if you have projectors with hid and fog with hid... I guess that would be a lot of light
kenkydUSA · Apr 8, 2009#3i just saw a yaris here in buf that had 2 (probably 5 or 6 inch) hella spot lights in front of grill. didnt stop and look how he mounted them though. i mounted them on the bumper frame on my last car.
IllusionXBrossard, QC · Apr 9, 2009#4i don't know man... when you say you want big light... i think of this:
Picture not included in this copy
is it all that necessary ? i don't think you are supposed to use them in town... It might be understanding if you lived in rural areas (see farms), but then... is this a must ?
ChinoCharlesOH · Apr 9, 2009#5Its too much? A tow hook isn't too much? LOL
DOOOO ITTTTTT.
I think my favorite member Yaris T Sport has them. Might be wrong though.
SailDesign. · Apr 9, 2009#6This was my old VW Fox - I still want to do something like this, but am not doing a thing until I can figure out how to do it RIGHT.
1 attachment not included in this copy
yaris-meAnaheim, CA · Apr 9, 2009#7 Originally Posted by
IllusionX ↑ i don't know man... when you say you want big light... i think of this:
Picture not included in this copy
is it all that necessary ? i don't think you are supposed to use them in town... It might be understanding if you lived in rural areas (see farms), but then... is this a must ?
😆🤣Sorry, I can't stop laughing.🤣🤣
AlainMikliSF, CA · Apr 10, 2009#8 Originally Posted by
yaris-me ↑ 😆🤣Sorry, I can't stop laughing.🤣🤣
😆😆😆😆
YarisSedanCalifornia - Bay Area · Apr 10, 2009#9spider
frownonfunRGV, Texas · Oct 3, 2009#10 Originally Posted by
SailDesign ↑ This was my old VW Fox - I still want to do something like this, but am not doing a thing until I can figure out how to do it RIGHT.
i think a couple small lights like that would look nice... i'm thinking of constructing a small rally bar coming up from under the front bumper to mount the lights on. just gotta find some place under the car to mount the bar.
ProhibitOklahoma City · Oct 7, 2009#11If he wants 50 of them on front of the yaris, more power to him.
jonismynameThread starteradirondacks, ny · Sep 28, 2010#12resurecting this thread, was googling for ideas when i found my own thread lol!
still trying to figure this out, had a set of lights mounted in the lower grill for a bit but got rid of them.
fall makes me want more light... i'm petrified of deer and drive too fast for conditions from to time... and i'm a light dweeb.
any new idea's? i think i'm still looking at cutting into grill... i can't think of any other way?
i like bigger reflectors as i feel they make better light...
CTScottUSA, CT · Sep 28, 2010#13I need to do something similar with Crashy to get light over the plow. When I get around to chopping her top, they'll be mounted to the roll cage. Until then I was thinking about a roof bar, like just the front section of a roof rack.
jonismynameThread starteradirondacks, ny · Sep 28, 2010#14 Originally Posted by
CTScott ↑ I need to do something similar with Crashy to get light over the plow. When I get around to chopping her top, they'll be mounted to the roll cage. Until then I was thinking about a roof bar, like just the front section of a roof rack.
PAR36 bulbs and housings would be perfect for something like that on a budget. sealed beam bulbs are cheap, buy/mount one cheap housing and swap bulbs as you like. rubber housings are about 8 bucks, bulbs 8-10 each from led's to floods to 100w airplane landing lights. lots of options.
i've concluded the only way i can make it work is to mount them in the front grille. i'd need to find a hosing that can mount flush to the front of the grill and cover the holes i'd need to cut. only problem is i'd have to way to aim or adjust the beams...
TickleTimeTimArkansas · Sep 28, 2010#15do like i plan on doing, mount the lights to the back of the car facing behind you, so when all those idiots think it's a good idea to ride up on your butt at night, you hit the lights!...probably not safe, but still thinking about it
jonismynameThread starteradirondacks, ny · Sep 28, 2010#16i've actually been planning on adding a par36 or smaller bulb flush mount into my bumper to act as an extra backup light, with a override switch to turn it on as a work light... so i can see my snowshoes or ski's when im taking them off after a trip and loading them in the car. i think that would work....
jonismynameThread starteradirondacks, ny · Sep 28, 2010#17Picture not included in this copy
^this guy has the idea for backup lights... these are 44 series led's though....
i'm also pondering adding round or oval led's (see above) inside my back window on the bottom of the frame, and plugging them into my trailer harness (in car) as secondary stop/tail/turn lights.
i really like lights. you should see my motorcycle...
CTScottUSA, CT · Sep 28, 2010#18 Originally Posted by
jonismyname ↑ PAR36 bulbs and housings would be perfect for something like that on a budget. sealed beam bulbs are cheap, buy/mount one cheap housing and swap bulbs as you like. rubber housings are about 8 bucks, bulbs 8-10 each from led's to floods to 100w airplane landing lights. lots of options.
i've concluded the only way i can make it work is to mount them in the front grille. i'd need to find a hosing that can mount flush to the front of the grill and cover the holes i'd need to cut. only problem is i'd have to way to aim or adjust the beams...
So, the grill mounting is so they are low enough to be legal for normal road use?
jonismynameThread starteradirondacks, ny · Sep 28, 2010#19 Originally Posted by
CTScott ↑ So, the grill mounting is so they are low enough to be legal for normal road use?
i like the looks of the car, and am trying not to interfere with it too much. i had driving lights coming out of the lower grill, and only removed them because they stuck out by themselves. without fabricating a light bar i'd like them "sunken". garm's fog lights are good, but i want to be able to change bulbs to find what i like... different wattages and beam patterns...
if i only had a crashy...
jonismynameThread starteradirondacks, ny · Sep 29, 2010#21^ did you see that array scott? crashy would thank you...
i was browsing the catalogs at work again today and found hella's optilux 2500 driving lights w/angel eyes. i recently installed micro image's projector kit with the ccfl rings... and think these would complement them nicely!
i apreciate the link to mounting... the problem i have is stuff would have to be removed to pull the bumper cover, which i find myself doing more and more often. then everytime it's reassembled it has to be re-adjusted and just adding to the project time...
i'm considering reinforcing the bumper cover and mounting some lights to the ridge on the bottom of the grill, or hanging them from the upper ridge in the lower grill (have done before w/out reinforcement, would bounce on rough roads but fine on main roads)
we'll see though... without a shop and losing daylight this may get postponed... again...
CTScottUSA, CT · Sep 29, 2010#22 Originally Posted by
jonismyname ↑ ^ did you see that array scott? crashy would thank you...
i was browsing the catalogs at work again today and found hella's optilux 2500 driving lights w/angel eyes. i recently installed micro image's projector kit with the ccfl rings... and think these would complement them nicely!
i apreciate the link to mounting... the problem i have is stuff would have to be removed to pull the bumper cover, which i find myself doing more and more often. then everytime it's reassembled it has to be re-adjusted and just adding to the project time...
i'm considering reinforcing the bumper cover and mounting some lights to the ridge on the bottom of the grill, or hanging them from the upper ridge in the lower grill (have done before w/out reinforcement, would bounce on rough roads but fine on main roads)
we'll see though... without a shop and losing daylight this may get postponed... again...
Did you see the price tag on that array? I think I am going to use the $40 LED utility lights that Northern Tool sells:
Picture not included in this copy jonismynameThread starteradirondacks, ny · Sep 30, 2010#23that'll work, par36 housing. you won't get much range, but i don't think you'll need it with crashy. i have about 5 or 6 bulbs that fit those housings that i was trying during my bike light project.
hella optilux 2500 have a ring that'll match my microimage projectors though...
Picture not included in this copy
i may need to give these a try