Yes, 1/4 mile hopefully with cockpit video.
Chino's Turbo Thread
299 posts · 77,926 views · page 4 of 6
Replies continued
Finally a quarter mile comming, this is what I have been waiting for for over a year on this forum 🙇🙇 👍
*hops up and down in his chair*🤤🤤🤤🙌🙌
Where you heading to 1/4 mile it?Originally Posted by ChinoCharles ↑I want to drag ZPI's tune off the E-manage and post it up. Patience... new exhaust this Saturday, 1/4 mile full tree on Tuesday (weather permitting) and we will go from there.
Dragway 42 in West Salem. http://dragway42.com/ You should come Ryan, it isn't too far from you.
I just checked the weather for next week. Not looking good. Rain on Tuesday. Might have to wait! Cross your fingers!
That's where I always run. But Tuesday? Come on, haven't you heard of a weekend? 😁Originally Posted by ChinoCharles ↑Dragway 42 in West Salem. http://dragway42.com/ You should come Ryan, it isn't too far from you.
They're usually booked on the weekends, although it looks like in the beginning of the season they do run on weekends. If not Tuesday, maybe Saturday.
They're not booked on the test & tune nights. Hell, I'll even run ya. =P
14.2 -- my prediction
15.8 with a 2.4 60ftOriginally Posted by cali yaris ↑14.2 -- my prediction
DEFINITELY not. Ran a 16.5 bone stock.Originally Posted by Russelt3hPirate ↑15.8 with a 2.4 60ft
14.2 sounds reasonable. I'm going to gun for 13.9 though.
think you can break into the high 80's trap?Originally Posted by ChinoCharles ↑DEFINITELY not. Ran a 16.5 bone stock.
14.2 sounds reasonable. I'm going to gun for 13.9 though.
only one way to find out 😉
I think you should scoop up a cheap set of racing slicks from craigslist... and do the poly engine mount mod, then rip it down the track
Its all speculation, but I'm shooting for a 100 MPH trap too. Going to be tough.
whoa now, whoa now guys..
i believe i can run that now with my setup.....Originally Posted by Russelt3hPirate ↑15.8 with a 2.4 60ft
I don't know, I did everything short of a clutch drop @ 5 grand and couldn't get into the low 16's, and I had damn near every bolt on imaginable.
^ dont forget about the "chinotake" 🤣
clutch drop @ 5 grand will do that. i do believe i will fare better.....Originally Posted by ChinoCharles ↑I don't know, I did everything short of a clutch drop @ 5 grand and couldn't get into the low 16's, and I had damn near every bolt on imaginable.
Ughhh don't clutch drop thats how i ruined my clutch, try to get it on the swing of the clutch pickup, practice and you'll get a better launch every time
Hey, the Chinotake was the shiznit. I'd stack that bad boy against anything for suction purposes... problem is the car was never tuned to know what to do with it.
Good luck with that Rockland! I know what I could have shaved off my time with better shifts, but my launch was almost perfect. 2500-3000 RPM is the sweet spot for a stockish Yaris on street tires. Get some slicks, up that starting RPM and shift a little faster than I and you might have a prayer for a 15.9.
Good luck with that Rockland! I know what I could have shaved off my time with better shifts, but my launch was almost perfect. 2500-3000 RPM is the sweet spot for a stockish Yaris on street tires. Get some slicks, up that starting RPM and shift a little faster than I and you might have a prayer for a 15.9.
swing of the clutch pickup? what does that mean?
Let off the clutch fast enough to gain good traction off the line without spinning the tires. Tire spin is BAD.
thanks for the good words but im no where near stockish.....Originally Posted by ChinoCharles ↑Good luck with that Rockland! I know what I could have shaved off my time with better shifts, but my launch was almost perfect. 2500-3000 RPM is the sweet spot for a stockish Yaris on street tires. Get some slicks, up that starting RPM and shift a little faster than I and you might have a prayer for a 15.9.
What... intake, full exhaust, pulleys, short shifter... what else is there?
and it's not even the underdrive pulley......
is the Chino-take for sale? I want to put it up on my wall "Yaris History"
thats what i was thinking just never actually heard a name for itOriginally Posted by ChinoCharles ↑Let off the clutch fast enough to gain good traction off the line without spinning the tires. Tire spin is BAD.
flux capacitorOriginally Posted by ChinoCharles ↑What... intake, full exhaust, pulleys, short shifter... what else is there?
Micro Image stickers? 😆
Charles, how is your idling and low rpm engine response?
flux capacitor1.21 JIGGAWATTS!!!!!!
Originally Posted by Nexus1155 ↑1.21 JIGGAWATTS!!!!!!
😆
Long, idling is as good as stock. Idles a little high when it is cold (1100-ish RPM) but once it warms up it goes back to the 750 RPM or so it was before the kit.
Under about 2 grand the engine feels exactly the same as it did before. From 2,000 to 3,200 RPM you can feel a little kick and hear the turbo spool a bit. From 3,200 on its a frickin' rocket. The turbo sounds like 20 vacuum cleaners under my feet.
Garm, I would be honored to send you the Chinotake. 😆
Under about 2 grand the engine feels exactly the same as it did before. From 2,000 to 3,200 RPM you can feel a little kick and hear the turbo spool a bit. From 3,200 on its a frickin' rocket. The turbo sounds like 20 vacuum cleaners under my feet.
Garm, I would be honored to send you the Chinotake. 😆
I believe 750 is above stock idle at a warm idle.
Only a hair if at all. Stock was what, 700?
idk, I remember reading somewhere it's 550-650 or something like that (no a/c). Don't quote me on that.
I'm going by what I saw on my tach. Can someone else confirm or deny?
It's different for the MT and AT. It's listed in the service manual.
Good deal, I'll have to check later. I'm curious now.
This is all I found so far for the automatic.
Engine idle speed, (A/C OFF) N position, 650 to 750 rpm
Engine idle speed, (A/C OFF) N position, 650 to 750 rpm
warmed up (mind you this is no boost at all) my mostly stock 07 MT LB idles between 500 and 650
OK, so I'm a little high. Makes sense when you consider the larger injectors and colder plugs, no?
By the way, second tank was 34.1 MPG on Shell 93.
By the way, second tank was 34.1 MPG on Shell 93.
From the Engine Mechanical section of the 2007 repair manual
(5) Inspect the engine idling speed.
Idling speed:
550 to 650 rpm for manual transaxle
650 to 750 rpm for automatic transaxle
NOTICE:
• Turn all the electrical systems and the A/C off.
• Inspect the idling speed with the cooling fan off.
• When checking the idling speed, shift the transmission to either the neutral
position or the parking position.
(5) Inspect the engine idling speed.
Idling speed:
550 to 650 rpm for manual transaxle
650 to 750 rpm for automatic transaxle
NOTICE:
• Turn all the electrical systems and the A/C off.
• Inspect the idling speed with the cooling fan off.
• When checking the idling speed, shift the transmission to either the neutral
position or the parking position.
OK, I'll get an exact reading on idle on my way home from the game.
Thanks NOOOOOOG.
I was going to ask... you're posting on YW while your're at a game? Boy, you are dedicated.
lol he got a spam removal request while there as well, well, either him or etimago