jclo3313Original postWoodstock, Ga · Apr 5, 2009#1I've been thinking about a YARiS panel delivery for some time now. I'm going to do a "bed" floor in bamboo with polished aluminum runners all the way to the drivers seat. Vinyl on the windows and fabric like the headliner on the inside where the window would be. I just thought it would be kind of different you know. Well let's hear from you, and feel free to let me have it.
Picture not included in this copy Floor close to this
Picture not included in this copy Like the HHR only cooler because it's a YARiS.😁
Picture not included in this copy3 attachments not included in this copy
Replies 54
jclo3313Thread starterWoodstock, Ga · Apr 5, 2009#2Tinted windows help the look.
Picture not included in this copy1 attachment not included in this copy
ShroomsterOrlando · Apr 5, 2009#3....pics aren't showing up...stupid FF
jkuchtaL.A. · Apr 5, 2009#4I dig it!!
Do this!
Kal-ElMassachusetts · Apr 5, 2009#5Toyota doesn't build these, do they? Do you have to convert it yourself?
YAR1SRaleigh, NC · Apr 5, 2009#6odd.... not my idea of nice but hey... if its good for you then do it.
why do you need a delivery van/hatch thingy anyways?
Kal-ElMassachusetts · Apr 5, 2009#7If I needed that type of privacy, I'd just get limo tint on the back windows.
To me, that would just look a lot better and is cheaper.
SilverBackEl Monte, Ca · Apr 5, 2009#8I like the idea. Yaris shag van FTW!
CTScottUSA, CT · Apr 5, 2009#9I like it. I think it would look better with the door pillar red though.
m911gtChicago · Apr 5, 2009#10 Originally Posted by
YAR1S ↑
why do you need a delivery van/hatch thingy anyways?
for the ladies, i'm guessing 🤷
😆 JK John, I like the idea, pretty neat!
AlexNet0Rockland, ME · Apr 5, 2009#11I think it would look pretty cool, I dont know about how well you would be able to see though.
That would work really well for me because I have quite a few tools and/or equipment that always end up taking over my back seat, and racks could be put up in back if it was like that.
m911gtChicago · Apr 5, 2009#12 Originally Posted by
AlexNet0 ↑ I think it would look pretty cool, I dont know about how well you would be able to see though.
That would work really well for me because I have quite a few tools and/or equipment that always end up taking over my back seat, and racks could be put up in back if it was like that.
shouldn't be too bad, i used to have a full size panel van and visibility wasn't bad...how much worse could it be in a tiny Yaris?
1NZYaris1New Zealand · Apr 5, 2009#13Ther is a PDF for factory flat floor conversion , file size is 4.5MB
so it's to large to put up here , but if you PM me your email i will send it to you. 👍
yaris-meAnaheim, CA · Apr 5, 2009#14Do it!👍
mikenacaratoBrentwood, TN · Apr 5, 2009#15i think it looks unique. do it. :)
protegeVBaltimore · Apr 6, 2009#16sorry, but that looks TERRIBLE.
kargoboySt. Augustine, FL · Apr 6, 2009#17I say do it.
jclo3313Thread starterWoodstock, Ga · Apr 6, 2009#18Thanks for the input so far. As to why, do I need to do it, no. I,m not worried about visability at all, if I can drive a firetruck the YARiS is a sinch. The main reanson for going this way is to pull off something unique. Like it love it or leave it, it's just an idea right now.
fnkngrvIn The Hotbox · Apr 6, 2009#19i like it
SabretoothSt Cloud FL · Apr 6, 2009#20Its cool looking, but something I wouldnt drive...
tk-421Dagobah · Apr 6, 2009#21Something just doesn't look right to me. I feel it looks a lot more balanced with the rear windows IMO.
Then again, whatever floats your boat is fine by me. Definitely a unique mod. 👍
RyuSurrey, BC · Apr 6, 2009#22If you need privacy at the back, 5% Limo tint would do just fine and cost less.
But Your idea is definitely unique, so go for it if you really like it. 👍
cali yarisCanoga Park, CA · Apr 6, 2009#23totally cool -- go for it.
1. red door pillar as mentioned
2. larger mini "truck style" rear view mirrors to complete the look.
3. roof racks
Franck_QcQuébec City, Canada · Apr 6, 2009#24I really like it ! Go for it.
KCALB SIRAYVirginia · Apr 6, 2009#25 Originally Posted by
jclo3313 ↑ Thanks for the input so far. As to why, do I need to do it, no. I,m not worried about visability at all, if I can drive a firetruck the YARiS is a sinch. The main reanson for going this way is to pull off something unique. Like it love it or leave it, it's just an idea right now.
I'd buy it. Throw a board on top or trick the hatch to have the glass open and the board out the back 🤘
ka0sxCA east bay · Apr 6, 2009#26I would get rid of the rear passaner windows anyday for that look. dunno about the floor thing. but i love the look without the windows, super clean, to bad there would be welding involved to do it right with sheetmetal or body work to properly mold CF to seamlessly
IsLNdbOiLas Vegas, NV · Apr 7, 2009#27 Originally Posted by
jclo3313 ↑ I've been thinking about a YARiS panel delivery for some time now. I'm going to do a "bed" floor in bamboo with polished aluminum runners all the way to the drivers seat. Vinyl on the windows and fabric like the headliner on the inside where the window would be. I just thought it would be kind of different you know. Well let's hear from you, and feel free to let me have it.
Picture not included in this copy
🤮
tuckevalastinDelaware/Connecticut · Apr 7, 2009#28I love classic panel deliveries and I love the HHR panel (especially the ss) but the Yaris is not the right type of vehicle for it. IMO it will end up more like an early 1990's Dodge Caravan workvan than anything else.
But if you like it, then you should do! (Gonna need a drop and some themed wheels though)
KCALB SIRAYVirginia · Apr 7, 2009#29 Originally Posted by
tuckevalastin ↑ I love classic panel deliveries and I love the HHR panel (especially the ss) but the Yaris is not the right type of vehicle for it. IMO it will end up more like an early 1990's Dodge Caravan workvan than anything else.
But if you like it, then you should do! (Gonna need a drop and some themed wheels though)
Yep, needs steel wheels color matched with baby moons in the middle. 🤘
SailDesign. · Apr 7, 2009#30I'd like something along these lines, with the teak bed... Lots more work, though.
4 attachments not included in this copy
jdinrcSouthern California · Apr 7, 2009#31 Originally Posted by
jclo3313 ↑ Tinted windows help the look.
Attachment 21198
That big blank red space is begging for some graphics 👍
cali yarisCanoga Park, CA · Apr 7, 2009#32 Yep, needs steel wheels color matched with baby moons in the middle.
oh hell yeah -- or some 5-spoke classic american mags 😉
jclo3313Thread starterWoodstock, Ga · Apr 8, 2009#33Ok, door pillars are now body color, roof rack hauling a kayak.
Picture not included in this copy1 attachment not included in this copy
KCALB SIRAYVirginia · Apr 8, 2009#34I like how you made the pillar slightly thicker as well. It makes the car actually look longer than it is. I like it and wish I had thought of it, lol
jclo3313Thread starterWoodstock, Ga · Apr 8, 2009#35Trying to give the car a more filled out look.
KCALB SIRAYVirginia · Apr 8, 2009#36Throw these on there and see what it loks like. maybe some Stockton Wheels
Picture not included in this copy
33OHDover, Ohio · Apr 8, 2009#37🎉
1 attachment not included in this copy
eTiMaGoBangkok, Thailand · Apr 8, 2009#38now drop it!
33OHDover, Ohio · Apr 8, 2009#39Added the fenders to it too. Helps with the look I think.
1 attachment not included in this copy
jclo3313Thread starterWoodstock, Ga · Apr 8, 2009#40I just need somthing beter than "paint" to do a shop logo.
33OHDover, Ohio · Apr 8, 2009#41What kind of shop logo? Get me the "Rusteez" logo from Cars. =)
(I can't go on Google Images at work)
eTiMaGoBangkok, Thailand · Apr 8, 2009#42now we're cookin' with gas...
Picture not included in this copy
😁
eTiMaGoBangkok, Thailand · Apr 8, 2009#43as capacious as the Yaris is, a little extra space won't hurt...
Picture not included in this copy
ShroomsterOrlando · Apr 8, 2009#44lmao the home depot...why don't you change the color of the car to orange then, Thomas?
eTiMaGoBangkok, Thailand · Apr 8, 2009#45got wood?
Picture not included in this copy
jclo3313Thread starterWoodstock, Ga · Apr 8, 2009#46Blocked at work.👎
eTiMaGoBangkok, Thailand · Apr 8, 2009#47awww we can't have that... can you see attachments?
1 attachment not included in this copy
jclo3313Thread starterWoodstock, Ga · Apr 8, 2009#48Thanks Thomas!
eTiMaGoBangkok, Thailand · Apr 8, 2009#49getting your wood saws and sander ready? 😁
jclo3313Thread starterWoodstock, Ga · Apr 8, 2009#50While super cool it's a bit farther than I want to go right now.😁 I could do it old mini clubman style I guess.
Picture not included in this copy1 attachment not included in this copy