Yarisworld Archive

Interpret my Dyno

18 posts · 6,185 views

YodaOriginal postFL · Mar 30, 2009#1
Sorry it took me so long to put it up but here it is😉

the second run i lost power🤷 Guy said its probably because it was hotter in the bay🙁

Well time for you guys to pick it apart.

1 attachment not included in this copy

Replies 17

rningonfumesSoCal · Mar 30, 2009#2
The first half is HP/Torque vs RPMs right?
cali yarisCanoga Park, CA · Mar 30, 2009#3
looks like vs. speed to me -- never seen that before, only rpm's
YodaThread starterFL · Mar 30, 2009#4
lol yea he forgot to put it in rpm so its in speed🙄 b ut you can reference it with the other dynos its the same.. i think
CASTREXCosta Rica · Mar 30, 2009#5
Originally Posted by PK198105 ↑
the famous AFR , its pretty steady but once you hit that 90mph its starting to get thirsty (i.e injectors are close to the max or the ECU is cutting off fuel slowly IMO).
That's because of the engine cut off not because is running out of fuel....

It would be really bad engineering from Toyota if the car ran lean at the red line...

Is just the rev limiter kicking in.
CASTREXCosta Rica · Mar 30, 2009#6
Originally Posted by Yoda ↑
Sorry it took me so long to put it up but here it is😉

the second run i lost power🤷 Guy said its probably because it was hotter in the bay🙁

Well time for you guys to pick it apart.

It seems pretty normal, just like any other NA Yaris.

It looks like you have a nice set of mods to pull 105 whp... that or the dyno is a little off...

Any ways, nice number 👍
YodaThread starterFL · Mar 30, 2009#7
Originally Posted by CASTREX ↑
It seems pretty normal, just like any other NA Yaris.

It looks like you have a nice set of mods to pull 105 whp... that or the dyno is a little off...

Any ways, nice number 👍
well i would hope it would be accurate.
AFE intake, DC header, TRD axleback, NST UD pulley... ehh that about it really as far as performance.
But to tell ya tha truth it feels alot slower than 105whp lol.
LtNoogieWest Hills, CA · Mar 30, 2009#8
MT or AT?

Your dyno guy may still have the raw data in his computer to give you a graph vs. RPM
YodaThread starterFL · Mar 30, 2009#9
Originally Posted by LtNoogie ↑
MT or AT?

Your dyno guy may still have the raw data in his computer to give you a graph vs. RPM
its a manny and yea its still on his comp
LtNoogieWest Hills, CA · Mar 30, 2009#10
First time I dyno'd. the guy gave me a printout like yours so I asked him to print one using RPM for the X axis.
RagnaCaTVillalba, Puerto Rico · Mar 30, 2009#11
Hmmmmmm? my to do list- AFE intake, DC header, TRD axleback, NST UD pulley
TOUGEghostKauai · Mar 31, 2009#12
Looks pretty nice to me, AFR's look real good too. 👍 Don't see anything wrong with it. Were you hoping for more hp?

Originally Posted by PK198105 ↑
the famous AFR , its pretty steady but once you hit that 90mph its starting to get thirsty (i.e injectors are close to the max or the ECU is cutting off fuel slowly IMO).
AFR from about 5000rpm to redline is right where you want it for max power. 😉
firemachine69Sudbury, On · Mar 31, 2009#13
That's a worthless dyno graph.


HP to RPM is the only one that counts.
YodaThread starterFL · Mar 31, 2009#14
Originally Posted by firemachine69 ↑
That's a worthless dyno graph.


HP to RPM is the only one that counts.
not really but i am gonna get the other one today or thursday to put up.
PETERPOOPOahu · Mar 31, 2009#15
Nice numbers! More HP than me with my blitz kit, but I was on a dynojet. hah. I want to dyno on your dyno.
YodaThread starterFL · Mar 31, 2009#16
Ok here is the other one😁 O and i noticed today that i had the AC on the whole time lol
thebarberGrand Rapids, MI · Mar 31, 2009#17
pretty impressive #'s for i/h/abe/pulley
RagnaCaTVillalba, Puerto Rico · Mar 31, 2009#18
Originally Posted by thebarber ↑
pretty impressive #'s for i/h/abe/pulley
Yeah +1