aucoriumOriginal postSouth Africa · Mar 30, 2009#1Hi Guys
Im thinking of doing a De-cat on my Yaris , and was wonder if anyone has done one with success , is there a better throttle response and what is the power increase all be it very small.
thanks !
Replies 12
eTiMaGoBangkok, Thailand · Mar 30, 2009#2The Nitto midpipes that I sold and Garm now does, has no cats, just resonators for a nice sound. There was definitely an increase in power when I installed mine, but then I never dyno'ed it so I cannot tell you how much.
Only problem you might have is with the oxygen sensor, it might throw a malfunction light if it detects there is no catalyser action going on. This can be mostly solved using a spacer like a spark plug anti-fouler for the rear O2 sensor.
aucoriumThread starterSouth Africa · Mar 30, 2009#3 Originally Posted by
eTiMaGo ↑ The Nitto midpipes that I sold and Garm now does, has no cats, just resonators for a nice sound. There was definitely an increase in power when I installed mine, but then I never dyno'ed it so I cannot tell you how much.
Only problem you might have is with the oxygen sensor, it might throw a malfunction light if it detects there is no catalyser action going on. This can be mostly solved using a spacer like a spark plug anti-fouler for the rear O2 sensor.
hey bro
AWESOME !! thanks for the info , yeah , i would need a lambna sensor delete , i know they did it to my buddies honda fit , and his seems to be running well.
aucoriumThread starterSouth Africa · Mar 31, 2009#4how is the system on your car setup ? does it have one of those on ?
eTiMaGoBangkok, Thailand · Apr 1, 2009#5I just have a spacer on mine, and never had a CEL 🙂
PETERPOOPOahu · Apr 1, 2009#6I have 2.25" header back exhaust. No cats and a 18" resonator. I am also boosted. I am going to be putting on a hi flow cat tomorrow. At first I was running a magnaflow muffler and it was LOUD, but now I switched mufflers and it's as loud as an axleback (even with no cats). I'm still going to put on the hi flow muffler just to quiet it down a little more and get rid of that smell. I can feel a sense of free flowing and non restrictiveness now. However, like I said earlier, I am boosted.
Oh yah, and to your question, no great throttle response (atleast in lower RPMs). I lost some torque by going with this exhaust setup. However, my supercharger picks up the slack.
edit: I also used the o2 anti fouler for the secondary sensor. I have no CEL because of it. However, once I put my high flow cat on, I'm going to take it off.
aucoriumThread starterSouth Africa · Apr 2, 2009#7 Originally Posted by
eTiMaGo ↑ I just have a spacer on mine, and never had a CEL 🙂
thats good news ! so all that the origional sensor does is regulate emmsions , the one after the cat i mean ,it cant effect richness or being lean etc ?
aucoriumThread starterSouth Africa · Apr 2, 2009#8 Originally Posted by
PETERPOOP ↑ I have 2.25" header back exhaust. No cats and a 18" resonator. I am also boosted. I am going to be putting on a hi flow cat tomorrow. At first I was running a magnaflow muffler and it was LOUD, but now I switched mufflers and it's as loud as an axleback (even with no cats). I'm still going to put on the hi flow muffler just to quiet it down a little more and get rid of that smell. I can feel a sense of free flowing and non restrictiveness now. However, like I said earlier, I am boosted.
Oh yah, and to your question, no great throttle response (atleast in lower RPMs). I lost some torque by going with this exhaust setup. However, my supercharger picks up the slack.
edit: I also used the o2 anti fouler for the secondary sensor. I have no CEL because of it. However, once I put my high flow cat on, I'm going to take it off.
ok cool , shot for the info buddy.
the smell you getting is because the cat is gone ?
i dont mind to much if its a little louder , so long as the car runs better with the cat gone , my little 1300cc can do with every little bit of power , no matter how small , LOL
cali yarisCanoga Park, CA · Apr 2, 2009#9This is the anti-fouler they are talking about:
Picture not included in this copy
The second O2 sensor (you have two sensors on the exhaust side, one on the manifold and one on the midpipe) looks for cat failure. The anti-fouler moves the sensor away from the exhaust stream, fooling it into thinking the cats are on the car.
PETERPOOPOahu · Apr 2, 2009#10 Originally Posted by
aucorium ↑ it cant effect richness or being lean etc ?
I'm not sure about this. However, since I have a hi flow cat on now, I don't think I need the anti fouler on anymore. Once I get a scangauge, I will be experimenting with and without the o2 sensor on.
eTiMaGoBangkok, Thailand · Apr 2, 2009#11nah the air/fuel ratio is determined by the front sensor, as mentioned by Garm, the rear one is just t check that the cat is functioning (basically checking if the gases coming our of the cat is cleaner than the gases going in), so if you don't have a cat, the spacer will shield the sensor a little bit, so it will seem to have a cleaner airflow.
aucoriumThread starterSouth Africa · Apr 2, 2009#12 Originally Posted by
cali yaris ↑ This is the anti-fouler they are talking about:
Picture not included in this copy
The second O2 sensor (you have two sensors on the exhaust side, one on the manifold and one on the midpipe) looks for cat failure. The anti-fouler moves the sensor away from the exhaust stream, fooling it into thinking the cats are on the car.
ahhh i see ! makes sense , how much is the fouler ?
aucoriumThread starterSouth Africa · Apr 2, 2009#13 Originally Posted by
eTiMaGo ↑ nah the air/fuel ratio is determined by the front sensor, as mentioned by Garm, the rear one is just t check that the cat is functioning (basically checking if the gases coming our of the cat is cleaner than the gases going in), so if you don't have a cat, the spacer will shield the sensor a little bit, so it will seem to have a cleaner airflow.
ahh ok cool !!! no i see how it works , thanks buddy! now i know it can be done.🤘 next on the list after my Teins arrive and is fitted , De-cat.