Yarisworld Archive

DIY - Liftback Intermittent Wipers via Stalk Replacement (v2.0)

142 posts · 194,568 views · page 3 of 3

Replies continued

CTScottThread starterUSA, CT · Aug 6, 2014#101
Originally Posted by duende_80 ↑
The question is that mine does not have the continuous function unless you pull the water sprayer.

I put a video I made this afternoon with the operation.

https://www.youtube.com/watch?v=uN5kz8EkJag

Interesting. Check the wiring going into the wiper switch to see if someone installed a wiper delay module. In the ON mode they normally run continuously, like yours does in the spray mode.
duende_80Leon, Spain. · Aug 6, 2014#102
Originally Posted by CTScott ↑
Interesting. Check the wiring going into the wiper switch to see if someone installed a wiper delay module. In the ON mode they normally run continuously, like yours does in the spray mode.
The truth is that if someone has installed a module or something has been in the actual assembly of toyota since we bought the car new, the truth that I dread plug and non-plug and play like your tutorials.
CTScottThread starterUSA, CT · Aug 6, 2014#103
Originally Posted by duende_80 ↑
The truth is that if someone has installed a module or something has been in the actual assembly of toyota since we bought the car new, the truth that I dread plug and non-plug and play like your tutorials.
I just realized you are in Spain. For some crazy reason I had assumed you were in Puerto Rico (with a US spec Yaris). Now, I am thinking that the European Yaris has something different about the internals of the wiper switch that causes the delay in ON mode.
duende_80Leon, Spain. · Aug 6, 2014#104
Originally Posted by CTScott ↑
I just realized you are in Spain. For some crazy reason I had assumed you were in Puerto Rico (with a US spec Yaris). Now, I am thinking that the European Yaris has something different about the internals of the wiper switch that causes the delay in ON mode.
If could be that the European version instead of intermittent and continuous scan so serious safer backwards that you would lose, continuous sweep.

What most interests me is that it is compatible with the car and can put without problems that do not match the wires to the main functions.
CTScottThread starterUSA, CT · Aug 6, 2014#105
Originally Posted by duende_80 ↑
If could be that the European version instead of intermittent and continuous scan so serious safer backwards that you would lose, continuous sweep.

What most interests me is that it is compatible with the car and can put without problems that do not match the wires to the main functions.
I just looked at the European wiring diagrams and there are two versions (with intermittent and without intermittent). The intermittent function is built into the wiper motor assembly, not into the switch.
duende_80Leon, Spain. · Aug 7, 2014#106
Originally Posted by CTScott ↑
I just looked at the European wiring diagrams and there are two versions (with intermittent and without intermittent). The intermittent function is built into the wiper motor assembly, not into the switch.

CTScott Hi, I could not answer before as I have been out all day and gone to buy the command of clean, but the joy did not last long.
In my car the rear wiper works perfectly, the two positions, intermittent and continuous, but have been to test the front and the front turn signal does not work and if I give the water sprayer expels water only and do not move the clean, I guess it has something to do with the four wires to a connector that brings greater.
CTScottThread starterUSA, CT · Aug 7, 2014#107
Originally Posted by duende_80 ↑
CTScott Hi, I could not answer before as I have been out all day and gone to buy the command of clean, but the joy did not last long.
In my car the rear wiper works perfectly, the two positions, intermittent and continuous, but have been to test the front and the front turn signal does not work and if I give the water sprayer expels water only and do not move the clean, I guess it has something to do with the four wires to a connector that brings greater.
Did you make any wiring modifications on your car? The turn signals and wipers are not wired into the same connector.
duende_80Leon, Spain. · Aug 7, 2014#108
Originally Posted by CTScott ↑
Did you make any wiring modifications on your car? The turn signals and wipers are not wired into the same connector.
Sorry, I wanted to say that intermittent function not working front or the clean sweep clean by spraying with water.
CTScottThread starterUSA, CT · Aug 7, 2014#109
Originally Posted by duende_80 ↑
Sorry, I wanted to say that intermittent function not working front or the clean sweep clean by spraying with water.
OK. So, the front intermittent and spray do not work, but the front constant slow and fast do work?
CTScottThread starterUSA, CT · Aug 7, 2014#111
OK. He was trying to install a stalk the was not compatible with the Yaris.
duende_80Leon, Spain. · Aug 7, 2014#112
Originally Posted by CTScott ↑
OK. He was trying to install a stalk the was not compatible with the Yaris.
So I better not me? There would be no solution lattest even have to modify the connector cables and wires and add my idea in the future is to put the rain sensor and light and I already have both knobs with auto function.
CTScottThread starterUSA, CT · Aug 7, 2014#113
Originally Posted by duende_80 ↑
So I better not me? There would be no solution lattest even have to modify the connector cables and wires and add my idea in the future is to put the rain sensor and light and I already have both knobs with auto function.
The rain sensor could be wired to the original switch. Is the problem you are having with the switch with the auto mode installed in place of the original?
duende_80Leon, Spain. · Aug 8, 2014#114
Originally Posted by CTScott ↑
The rain sensor could be wired to the original switch. Is the problem you are having with the switch with the auto mode installed in place of the original?

The rain sensor I have not actually purchased and install a universal sensor and i do not know if I would give problems with the installation in command of the clean.

I'm checking the electrical diagrams and yaris car that came the command of the cleanest I buy and not between English and not much is because electronics do not quite understand the schemes.
duende_80Leon, Spain. · Aug 9, 2014#115
Hello CTScott, I've been all day checking the pins of the two controls with multimeter and now to put the original remote car I have found that does not work the front sprinklers, nothing comes out of water and do not know what could be doing something noise but only the wipers move.
CTScottThread starterUSA, CT · Aug 9, 2014#116
Originally Posted by duende_80 ↑
Hello CTScott, I've been all day checking the pins of the two controls with multimeter and now to put the original remote car I have found that does not work the front sprinklers, nothing comes out of water and do not know what could be doing something noise but only the wipers move.
Check the 15A WSH fuse that is in the fuse panel under the dashboard.
duende_80Leon, Spain. · Aug 10, 2014#117
Originally Posted by CTScott ↑
Check the 15A WSH fuse that is in the fuse panel under the dashboard.

Thanks CTScott today look fuses and after remembering all engineers toyota by putting the fuses where they have unsuccessfully to remove the fuse probe front and now operate sprinklers, not because they would not work yesterday, but now I have a dilemma, as the fuses are removed? is that the hand position and was not able to get any.

Regarding connectors with multimeter I managed to discover that pins have continuity in every position, match all pins with the original remote all less intermittent position front and roulette to vary intermittent but only at position + choices and this last if you do not understand.
beakerconyers ga · Oct 16, 2014#118
Did mine today. Got a switch off ebay for $35.00. Took about 10 minutes. Can't wait till it rains now LOL.
xavi_3dMadeira, Portugal · Nov 2, 2015#119
Hello, can please anyone tell if this one will work?? It's from a 2010 avensis

Picture lost · s29.postimg.org

Picture lost · s4.postimg.org
CTScottThread starterUSA, CT · Nov 2, 2015#120
Originally Posted by xavi_3d ↑
Hello, can please anyone tell if this one will work?? It's from a 2010 avensis

Picture lost · s29.postimg.org

Picture lost · s4.postimg.org
No.
bairjoNov 2, 2015#121
Originally Posted by CTScott ↑
No.
Scott, do you think you could in the future shorten your response a little? 🤣
xavi_3dMadeira, Portugal · Nov 3, 2015#122
Originally Posted by CTScott ↑
No.
Thank you.
Kar98DFW · Jan 13, 2016#125
Originally Posted by Frank the Tank ↑
More info needed.
Also what year rav4
Says RAV4 07, so I'm gonna assume it's a RAV4, from '07. What other info do you need? The stalk swaps right in with no further modification needed.
tmontagueCaledonia Ont. · Jan 13, 2016#126
If you remember correctly, that is the same stalk I installed last month on my sedan. Works like a charm, I have no idea how I went this long without it, rainy days are much easier to deal with now
invader166Langley, BC · Jan 14, 2016#128
If it's Prius compatible, i don't see why it shoudn't work.
jcboyAsia · Jan 14, 2016#130
Originally Posted by xavi_3d ↑
Hello, can please anyone tell if this one will work?? It's from a 2010 avensis

Picture lost · s29.postimg.org

Picture lost · s4.postimg.org


Originally Posted by CTScott ↑
No.
HI Scott, i know you are sure, but mine's pretty similar to this, and it works.
MUSKOKA800Chatham, Ontario, Canada · Jan 14, 2016#131
And, as the sedan doesn't have a rear wiper can we assume the Camry's stalk would be in play for us?
Frank the TankToronto · Jan 14, 2016#132
Originally Posted by lambros ↑
https://lh3.googleusercontent.com/oH...=w1280-h720-no
This is mine before installation...code 84652-48060 from previus models but I like it more because writes words MIST-OFF-INT-LO-HI and not just icons.....
Link doesn't work
tmontagueCaledonia Ont. · Jan 14, 2016#133
Originally Posted by MUSKOKA800 ↑
And, as the sedan doesn't have a rear wiper can we assume the Camry's stalk would be in play for us?
I dont know if you camry one would work or not. I have a liftback version on my sedan and it works fine, the rear wiper switch just doesnt do anything
NYC-SENYC · Jan 15, 2016#134
Does anybody know if this will work on a 3rd gen Yaris? What part number if so?
lambrosKALAMATA MESSINIA GREECE · Jan 19, 2016#135
What about mk3 and intermittent wipers? It works to new Yaris?


Sent from my iPad using Tapatalk
Frank the TankToronto · Apr 11, 2016#136
OK, so CTscott says the 84652-48060 won't for work hatchback rear intermeniant wipers but lambros says it works for his.

For the people who got their rear wipers to have a intermeniant setting, can you post up your part numbers?
CTScottThread starterUSA, CT · Apr 11, 2016#137
Originally Posted by Frank the Tank ↑
OK, so CTscott says the 84652-48060 won't for work hatchback rear intermeniant wipers but lambros says it works for his.

For the people who got their rear wipers to have a intermeniant setting, can you post up your part numbers?
I don't specifically say that it won't work. I only listed the ones I was sure would work. If someone else tried the 84652-48060 and it worked, then it will for you as well.
bairjoApr 11, 2016#138
Originally Posted by Frank the Tank ↑
OK, so CTscott says the 84652-48060 won't for work hatchback rear intermeniant wipers but lambros says it works for his.

For the people who got their rear wipers to have a intermeniant setting, can you post up your part numbers?

Jeez...I get the impression folks on here think that Scott is a human catalog of "what if" parts to try. The man has supplied info on what works and works well....so I go with what he has researched and proven. why not? His info is bullet proof in my mind.....not questionable like some info on this thread.
KasbienVancouver, BC · Apr 15, 2023#139
Can confirm that part number 84652-04141 (for Tacomas/Tundras) works in my 2007 sedan. Got an aftermarket switch off ebay for a fraction of the price of the OEM unit (~$50USD). Functions and looks identical to OEM, but the "click detent" might not be as nice when physically moving it. Relay is also a bit more audible, but not enough to drive me bonkers or anything. Time will tell how it holds up. Thanks for sharing this guide!
KermitAUSAustralia · Jun 25, 2024#140
Hi,

Has anyone done this for an RHD Australian Yaris?
KermitAUSAustralia · Jun 25, 2024#141
Anyone done this for a RHD?
thisemailisnotavailableNZ · Sep 14, 2026#142
Originally Posted by KermitAUS ↑
Anyone done this for a RHD?
AUSDM, I imagine would be the same as JDM or NZDM.
Intermittent time control wiper stalk for RHD

I've just done on my 09 NZDM hatchback, using Prius ZVW30 stalk.
Works as it should.

I've not checked the market rate for a second hand one locally but ex-Japan, the Prius one goes for up to high 2000 yen (cheap as chips) whereas 90 series Vitz or Yaris, you'll have to pay up to 10000 yen (these might be new) and a lot of the switches are the fixed interval intermittent switches. If you buy some other stuff thru proxy services, it definitely makes sense.

Rear intermittent doesn't bother me at all, I would only turn it on once then off, if I need to back up after/during heavy rain, most of the time I would be driving forward (and don't need the rear view completely clear to check the rear vision anyway)

By the way, this thread topic should be "variable intermittent" wiper, as opposed to "(fixed interval) intermittent" wiper, although we all get the idea.

I did rough check with a stopwatch,

fixed interval intermittent: ~3.5 seconds

variable intermittent 1: ~2 seconds
2: ~4 seconds
3: ~7 seconds
4: ~9 seconds

it feels like the in-between settings give more adjustability but can't be sure, might be the operator error with the stopwatch.