Replies continued
whooppee777Thread starterMaryland · Apr 24, 2009#51 Originally Posted by
Tamago ↑ why not be the only yaris that has only 3 wheels? cut a hole in your trunk and put one wheel in the back, now THAT will turn heads
👏
turn head yes. cool/feasable not really
Originally Posted by
Russelt3hPirate ↑ don't forget stronger trans and an LSD.
if you're the only guy in the country with it be prepared to build more than 1 engine, more like 7 or 8 before you get the tuning right.
if you're looking to do something "on the cheap" then the last thing you want to be is the "first"
the first person is the person who spends the most $$, didn't you take economics and marketing? 🤣
the trans im not too worried about. if it blows i'll replace it with something stronger. the lsd is an upgrade i do intend to do.
no not worried about the money this is a project i see stretching across 2 years or more. i kinda see cali yaris as the real first to go for power in the
300hp area. i'll b sure to keep him on speed dial and learn from his mistakes, if he makes any.
i took intro to economics. but that was about 2 years ago. i must have slept in on the day they covered twin charging an econo box.
so does anyone have anything to add as far as my needed parts go?
Russelt3hPirateEpcot · Apr 24, 2009#52besides little stuff?
have you decided on compression ratio?
slap on a GT30R .76 AR, you don't need low end, you need top end.
new cams.
you're going to have to find the best tuner in the world to get this to run at all.
probably some 600cc injectors too, external fuel pump wouldn't be a bad idea.
2 more built 1nzFE's for the first time you over boost the turbo and can't provide enough fuel (most likely the 3rd or 4th dyno pull).
how much do you forsee this costing you? you pretend $$ isn't a factor, but once you figure out how much you're potentially going to dump into this car you may choose another route.
my guess is around $30k to get it to the point of reliability and more than 250whp use able and safe.
whooppee777Thread starterMaryland · Apr 24, 2009#53 Originally Posted by
Russelt3hPirate ↑ besides little stuff?
have you decided on compression ratio?
slap on a GT30R .76 AR, you don't need low end, you need top end.
new cams.
you're going to have to find the best tuner in the world to get this to run at all.
probably some 600cc injectors too, external fuel pump wouldn't be a bad idea.
2 more built 1nzFE's for the first time you over boost the turbo and can't provide enough fuel (most likely the 3rd or 4th dyno pull).
how much do you forsee this costing you? you pretend $$ isn't a factor, but once you figure out how much you're potentially going to dump into this car you may choose another route.
my guess is around $30k to get it to the point of reliability and more than 250whp use able and safe.
i consider this the collecting information process. thats why i listed the vital items first to gauge the cost. if it's not an astronimical amount after i figure that stuff out i'll move on to the fuel system. sleeving the block will key to figuring out how much boost i will push, i want between 20 and 25 since that's what brash boys said will get you over 300hp going twin charged.
there is a guy who lives less than 2 miles from my home who has a shop literally next to his house with every piece of machinery imaginable for building engines. its all he does for a living is build big block chevy engines. and my dad has known him forever so i'm sure he wont break my back in fees. and he does amazing work for being the crazy mf he is.
so you tell me, at 22.5 pounds of boost what compression pistons should i use?
whooppee777Thread starterMaryland · Apr 24, 2009#54if they would do that im sure they would want a deposit, and i am not sending LARGE amount of money to japan to possibly get ripped off.
TamagoOff Grid · Apr 24, 2009#55 Originally Posted by
whooppee777 ↑ turn head yes. cool/feasable not really
i want to twin charge my yaris
turns head yes, cool/feasable, NOT REALLY
whooppee777Thread starterMaryland · Apr 25, 2009#56is there a button on here i can click that prevents the pessimists from posting on the forums?
TamagoOff Grid · Apr 25, 2009#57 Originally Posted by
whooppee777 ↑ is there a button on here i can click that prevents the pessimists from posting on the forums?
yes, here it is
Link to a thread or page that is not in the archive whooppee777Thread starterMaryland · Apr 25, 2009#58your about as funny as kathy griffin.
i understand that lower compression pistons would be required but how will that affect the power output during low boost when only the supercharger is creating the boost? wouldnt there be a loss in power?
whooppee777Thread starterMaryland · Apr 25, 2009#59TamagoOff Grid · Apr 25, 2009#60 Originally Posted by
whooppee777 ↑ your about as funny as kathy griffin.
i understand that lower compression pistons would be required but how will that affect the power output during low boost when only the supercharger is creating the boost? wouldnt there be a loss in power?
yes there would. but that's why you have the supercharger, right? make boost before the turbo can?
TamagoOff Grid · Apr 25, 2009#61 Originally Posted by
whooppee777 ↑
yes, very interesting:
Alex, read the previous page. This twincharge project is DEAD for me. I've already sold the supercharger. I'm not concentrating on an all-turbo build. HMMMMMM i wonder why he gave up?
because he realized it's not worth the time/money/weight ?
whooppee777Thread starterMaryland · Apr 25, 2009#62Did you not graduate from Grade School, because you don't read very well.
vettereddie's last post
"Yeah, the intake temp is what I saw was the biggest issue and why the twincharge varient is NOT happening. If a new manifold was done after the supercharger that had a air-to-water intercooler built in, then it could probably work. Alternately, I could have used meth injection, but on a daily driver that would be a pain to keep filled. "
and on page 3 he elaborates on his reason for not twin charging
"Simply put, the incoming pre-pressurized air would be at elevated temperature. The compressor rotor lobes are metal and do undergo thermal expansion. If the intake temp is too high, they will expand out of tolerance and hit instead of mesh, locking the compressor. Also, methanol can not be injected pre-s/c to cool the rotors because it could displace the oil in the sealed bearings and dry them out, damaging the compressor shaft. Elevated temperature could also de-laminate the anti-friction coating on the lobes, creating a FOD issue in the compressor, or worse, get pulled into the cylinder. "
it had nothing to do with whether it was "worth the time/money/weight"
congrats Tamago, you officially made an ass of yourself.
TamagoOff Grid · Apr 25, 2009#63wait wait, so i just read what his reasoning was...
sounds like twin charging was a bad idea.
hmm maybe in your head this:
Simply put, the incoming pre-pressurized air would be at elevated temperature. The compressor rotor lobes are metal and do undergo thermal expansion. If the intake temp is too high, they will expand out of tolerance and hit instead of mesh, locking the compressor.
translates into it being a good idea?
TamagoOff Grid · Apr 25, 2009#64LOL @ your twincharge idea.
whooppee777Thread starterMaryland · Apr 25, 2009#65Picture not included in this copy
that appears to be a bad idea.
i never thought running the boost from the turbo into the s/c compressor was a good idea in the first place. i was considering a manifold that would allow the boost from the turbo to bypass the compressor altogether.
Picture not included in this copy
whatever they did is a good idea, if it wasnt a good idea they wouldnt sell it.
changchewsoonMalaysia · Apr 26, 2009#66Just want to share the emails exchanged between me and Brashboy.
----- Original Message -----
From: "千葉 忠成" <brashboy_chiba@yahoo.co.jp>
To: "Chang Chew Soon" <email masked>
Sent: Friday, April 10, 2009 1:53 PM
Subject: Re: CONTACT US
> Piston set 150,000JPY
> Connecting rods 160,000JPY
> Valve and Valve springe 140,000JPY
>
> E-manage Blue is good!!
> boost 1.2 is no problem for complete engine.
>
> And you need big injector, big fuel pump.
>
> --- Chang Chew Soon <email masked> wrote:
>
>> Hello,
>>
>> Thank you! Yes I agree it is better to have complete
>> set. Can you please
>> quote me the price for the complete set for the
>> piston, rods, valve and
>> valve spring.
>>
>> I am currently using Trust E-Manage Blue, if I want
>> to boost 1.2 bar is it
>> sufficient?
>>
>> Thank you!
>> Chew Soon
>>
>> ----- Original Message -----
>> From: "千葉 忠成" <brashboy_chiba@yahoo.co.jp>
>> To: "Chang Chew Soon" <email masked>
>> Sent: Friday, April 10, 2009 12:13 PM
>> Subject: Re: CONTACT US
>>
>>
>> > Hello.
>> >
>> > I have following forged parts for 1NZ-FE.
>> >
>> > Had better to install,
>> > Piston (8.5:1)
>> > Connecting Rods
>> > Valve
>> > Valve spring
>> >
>> > Our forged 1NZ-FE have over 230ps (Yaris).
>> >
>> > Brash Boy JDM Trading, CHIBA
>> >
>> >
whooppee777Thread starterMaryland · Apr 26, 2009#67thank u. excellent post
Russelt3hPirateEpcot · Apr 28, 2009#68 Originally Posted by
whooppee777 ↑ whatever they did is a good idea, if it wasnt a good idea they wouldnt sell it.
this is assuming they didn't do exactly what you were thinking of not doing, and it could be why they aren't selling it as a kit. :(
plus they are on the old Vitz platform, wonder how much the ECU setup has changed since?
whooppee777Thread starterMaryland · Apr 28, 2009#69 Originally Posted by
Russelt3hPirate ↑ this is assuming they didn't do exactly what you were thinking of not doing, and it could be why they aren't selling it as a kit. :(
plus they are on the old Vitz platform, wonder how much the ECU setup has changed since?
reading that gave me a head ache