Yarisworld Archive

greddy e-manage?

9 posts · 6,777 views

silver_echoOriginal postSpokane, WA · Mar 26, 2009#1
there is a guy on one of the other forums that i am on that is selling the kit, and lists it as able to work on the 1nz-fe... anyone tried it? does it work? how well?

Replies 8

CASTREXCosta Rica · Mar 26, 2009#2
The emanage blue has been used with some level of success on the First gen xB / xA and the Echo.

It does not work properly on the Yaris. The ZPI turbo kit used the blue but they also throw the car into a CEL coma to be able to use it...
changchewsoonMalaysia · Mar 29, 2009#4
i'm currently using e-manage blue i have no problems with it so far.
CASTREXCosta Rica · Mar 30, 2009#5
Originally Posted by changchewsoon ↑
i'm currently using e-manage blue i have no problems with it so far.
Haven't you had any problems with the OE ECU re-learnig around the Emanage tune?

Do you have any data log of your AFR's at partial throttle and WOT?


The problem that many people have seen with the emanage and other piggy backs is that cars ECu will quickly find a way to go around it and turn everything back to the orginal tune...
changchewsoonMalaysia · Mar 30, 2009#6
I do have a dyno chart that shows WOT, hope it helps.

Picture not included in this copy

Link to a thread or page that is not in the archive

I do have a Innovate LC-1 wideband, it shows the AFR is between 14-15 during highway cruising at partial throttle.

Yes, actually I do hear from some people claiming that the OEM ECU will adapt itself around the E-Manage. Did it happened to USDM ECU? I'm not too sure about JDM ECU though. We have lots of 1NZ-FE here running different types of piggyback, from E-Manage Blue to E-Manage Ultimate, Dastek Unichip and even SMT.

I'm quite curious myself actually and hence this is one of the reason why I invested in a wideband kit to monitor my AFR.
PHXDEMONPhoenix, AZ · Mar 30, 2009#7
I'm thinking about buying an emanage ultimate just to see if I can do some NA tuning before boosting 😈
CASTREXCosta Rica · Mar 30, 2009#8
Originally Posted by changchewsoon ↑
I do have a dyno chart that shows WOT, hope it helps.

Picture not included in this copy

Link to a thread or page that is not in the archive

I do have a Innovate LC-1 wideband, it shows the AFR is between 14-15 during highway cruising at partial throttle.

Yes, actually I do hear from some people claiming that the OEM ECU will adapt itself around the E-Manage. Did it happened to USDM ECU? I'm not too sure about JDM ECU though. We have lots of 1NZ-FE here running different types of piggyback, from E-Manage Blue to E-Manage Ultimate, Dastek Unichip and even SMT.

I'm quite curious myself actually and hence this is one of the reason why I invested in a wideband kit to monitor my AFR.
Well... your AFR's seem to be in good order! just above 12:1 to the red line.

This seems to be another clear example of the difference between the US ECU and other countries...

Are you able to modify the ignition timing with the emanage?

👍
changchewsoonMalaysia · Mar 31, 2009#9
Thanks, I hope the AFR would stay stable just like that too.

Yes with the E-Manage we're able to control the ignition timing with the additional timing harness. However, by adding a V-Manage we can even fine tune it.

Its sad to know that the USDM ECU and JDM ECU is different, if not we could have shared a lot of common tuning parts together :(