harveyjaiOriginal postSydney, Australia · Mar 22, 2009#1Hey guys.
I wanna get some Front camber bolts,
and rubber bushings, and most probably install them at the same time.
What are the options for yaris Hatchbacks?
How do i know which bushing will work with my yaris?
Thanks in advance.
Harvey😎
Replies 12
supmetSouthern California · Mar 22, 2009#2harveyjaiThread starterSydney, Australia · Mar 22, 2009#3wow..looked like an OEM product??
lunjiaowPerth, Australia. · Mar 23, 2009#4I got some whiteline camber bolts. Only to correct camber back to stock settings for now..
Also if you get aftermarket bushings wouldn't you get a harsher ride and rattle your whole interior to bits.? Its only what i have heard, never had bushings done before.
MUSKOKA800Chatham, Ontario, Canada · Mar 23, 2009#5OEM bushings are rubber .
Are you sure it isn't urethane bushing you're seeking?
Yes, Harm has camber bolts, and much cheaper than the alignment shop hit me up for mine.
harveyjaiThread starterSydney, Australia · Mar 24, 2009#6so i should get bushings?
i thought it helps u conrner better..
CASTREXCosta Rica · Mar 24, 2009#7The question is not if you should get bushings?
but where would you get bushings from? As there are no bushing kits available for the Yaris.
Do you feel that your doesn't corner very well? what suspension mods do you have?
If you want your car to corner better you start by:
Springs
Tires
Rear Sway bar
If you have all those and you still feel your car is nor cornering weel enough... 🙄
Take a look at Tamago's handling thread. Is a sticky on the suspension forum
harveyjaiThread starterSydney, Australia · Mar 25, 2009#8I got TRD springs ad shocks, Ku36 tires, and Ultraracing rear sway bar.
It does do well, is just that i m thinking whether the bushing will improve even more.
Btw, is it worth it to replace my TRD spring into TANABE DF210?? would that give me lower ride height and stiffer setting?
Russelt3hPirateEpcot · Mar 25, 2009#9camber bolts shouldn't cost more than $16 for the pair.
search around.
Ingalls from Summit racing for example.
CASTREXCosta Rica · Mar 26, 2009#10 Originally Posted by
harveyjai ↑ I got TRD springs ad shocks, Ku36 tires, and Ultraracing rear sway bar.
It does do well, is just that i m thinking whether the bushing will improve even more.
Btw, is it worth it to replace my TRD spring into TANABE DF210?? would that
give me lower ride height and stiffer setting?
No you stay with the TRD's. The Tanabe will drop yor car a little more than the TRD's but they are not stiffer.
The TRD shocks and and springs were designed to work together.
You are on the right track with your set up...
unfortunately there are no bushings for the Yaris yet.
You can look into the front camber bolts. Garm sells those or you can probably got them locally also. It's a cheap mod that will help you to dial a little bit of negative camber.
Other than what you have there is not much more to do... other than go to a full coilover set up...
There are a bunch of braces available but you alrady got the rear sway bar and that is the most important...
I say you go out and drive and enjoy your car... it should drive pretty well by now...
cali yarisCanoga Park, CA · Mar 26, 2009#11 camber bolts shouldn't cost more than $16 for the pair.
True for bolts that set a specific camber. I've never seen adjustable ones for $16/pair.
TheRealEnthMiami, FL · Mar 26, 2009#12bs
harveyjaiThread starterSydney, Australia · Mar 28, 2009#13 Originally Posted by
CASTREX ↑ No you stay with the TRD's........
I say you go out and drive and enjoy your car... it should drive pretty well by now...
i did enjoy my car..thanks for advice buddies!
http://www.youtube.com/watch?v=F3iZuZ6VrOQ