LtNoogieOriginal postWest Hills, CA · Mar 20, 2009#1I just installed a sandwich plate and oil pressure sensor. The oil pressure gauge is finally connected and I shot a video to show the readings at various RPMs.
I was wondering if others of you who have oil pressure gauges are seeing the similar readings. I've never had one so I have nothing to go by.
Thanks
http://www.youtube.com/watch?v=3XsfSoKuDxUReplies 14
cali yarisCanoga Park, CA · Mar 20, 2009#2totally normal. Might even show 90+ on cold start.
1NZYaris1New Zealand · Mar 20, 2009#3looks good, commentry could show a little more urgancy ,
then you would sound you like fighter pilot 😆
CompanyXPaladinSoCal · Mar 20, 2009#4 Originally Posted by PK198105 ↑
how did you install the pressure gauge? maybe a diy?
+1, please
LtNoogieThread starterWest Hills, CA · Mar 20, 2009#5Ok, I'll work on it. Not really a DIY since I did not take pictures along the way but I'll kludge something up.
TamagoOff Grid · Mar 20, 2009#61 install sandwich adaptor
2. run sensor wire inside the car
3. ??????????????????
4. profit!
LtNoogieThread starterWest Hills, CA · Mar 20, 2009#7Hey Peter, don't mess up my thread!
LtNoogieThread starterWest Hills, CA · Mar 20, 2009#8 Originally Posted by
Tamago ↑ 1 install sandwich adaptor
2. run sensor wire inside the car
3. ??????????????????
4. profit!
Tamago, you're right but sometimes pictures help those who have not gone through it. Otherwise, I could have said the same for the supercharger...
1. remove the parts you don't need
2. bolt on supercharger parts
3. wire to ECU
4. boost and grin
🙂
eTiMaGoBangkok, Thailand · Mar 20, 2009#9enough's enough, if some people cannot act like adults, they need to go away and grow up for a while.
Carry on...
White YarisWarm Orange County · Mar 20, 2009#10is sandwich plate size is 20mm 1.5thread just wondering? And, it should be 20 - 80 in range.
LtNoogieThread starterWest Hills, CA · Mar 20, 2009#11White YarisWarm Orange County · Mar 20, 2009#12 Originally Posted by
LtNoogie ↑
ah, thank you. And have fun with your fancy gauge and sc 😁
LtNoogieThread starterWest Hills, CA · Mar 20, 2009#13I'm putting together a DIY. It should be up in a couple of hours.
CompanyXPaladinSoCal · Mar 21, 2009#14 Originally Posted by
LtNoogie ↑ I'm putting together a DIY. It should be up in a couple of hours.
You rock.
YarisSedanCalifornia - Bay Area · Mar 21, 2009#15Picture not included in this copy
I want to get one of these to go with that mod you did. And mout it behind the steering wheel for a oem look. And get a oil pressure oil temp and coolant temp gauges.