Yarisworld Archive

TC swap?

39 posts · 15,729 views

MicroHBOriginal postSoCaL · Mar 20, 2009#1
anyone tried to swap TC engine into yaris??

Replies 38

TamagoOff Grid · Mar 20, 2009#2
pretty sure no

why would you choose such a heavy powerplant?

and why not call it a toyota Highlander engine?
BLAZINBLUEVITZNEW YORK · Mar 20, 2009#3
or a camry
TamagoOff Grid · Mar 20, 2009#4
Originally Posted by BLAZINBLUEVITZ ↑
or a camry
or a tacoma
supmetSouthern California · Mar 20, 2009#5
Originally Posted by Tamago ↑
or a tacoma
really?
cali yarisCanoga Park, CA · Mar 20, 2009#6
or a tacoma
Nope, not the same as a Tacoma.

Engine
2.7-liter DOHC EFI 4-cylinder with VVT-i
159 hp @ 5200 rpm
180 lb.-ft. @ 3800 rpm
mastaofdisastaamerika · Mar 20, 2009#7
throw a nissan titan engine in thar
tuckevalastinDelaware/Connecticut · Mar 20, 2009#9
I don't think the point is that it won't fit but more that there are better, lighter options that will also fit
supmetSouthern California · Mar 20, 2009#10
Originally Posted by PK198105 ↑
isn't the TC engine bay same size as the regular Yaris?
I don't really think so.. the tc hood is like 4 feet long. The yaris hood is like 2.
tuckevalastinDelaware/Connecticut · Mar 20, 2009#11
Well personally if I couldn't figure a way to stuff a LS1 in it I wouldn't bother with a motor swap in the Yaris... but for those that would, I think they find other Toyota motors to be a better choice.


As for engine swaps in general, certain motors like the chevy 350 or the LS1 or etc. can be put in almost anything and still be considered ok in the car world. A die hard fan will always be against an engine from a different make though.
tuckevalastinDelaware/Connecticut · Mar 20, 2009#12
assuming you are talking about the last generation MR2's 1ZZ-FE, I'm pretty sure that engine wasn't as powerful as the 2zz-GE from the Celica.


don't qoute me though, I'm no Toyota engine diehard
tuckevalastinDelaware/Connecticut · Mar 20, 2009#13
You'd stand out from the rest of us...
KCALB SIRAYVirginia · Mar 20, 2009#15
the 2AZ will fit and it is a great platform to build on. On such a light car, the power to weight difference doesn't really factor in. Yes, the 2ZZ is more powerful, but that doesn't mean better.
supmetSouthern California · Mar 20, 2009#16
Originally Posted by KCALB SIRAY ↑
the 2AZ will fit
link?

Originally Posted by KCALB SIRAY ↑
and it is a great platform to build on. On such a light car, the power to weight difference doesn't really factor in. Yes, the 2ZZ is more powerful, but that doesn't mean better.
In what way is a 2.4L that is producing less power better than a 1.8 producing more? From what I hear the 2ZZ is a tight squeeze already. There's no way you'll be able fit a supercharger or turbo with the 2AZ(if it actually fits).
eTiMaGoBangkok, Thailand · Mar 21, 2009#17
Originally Posted by supmet ↑
In what way is a 2.4L that is producing less power better than a 1.8 producing more? From what I hear the 2ZZ is a tight squeeze already. There's no way you'll be able fit a supercharger or turbo with the 2AZ(if it actually fits).
Very different engine characteristics, the 2ZZ needs to rev HARD to get its power, while a larger engine would be much more torquey and usable.

PK, if it's the latest model MR2 then yes, that would be a 1ZZ engine. Engine which was also used in the previous generation regular 1.8L Corollas. The 2ZZ (Celica, Matrix/Corolla XRS) is essentially the same engine, but with the VVTL-i head which, like Honda's VTEC, allows a high-RPM cam profile for an increase in power, like a second wind, if you will... These engines have been swapped in Yarii over here, as well as Puerto Rico, and I am sure in many other places.

If it's an older MR2 then you'd have the 2.0L 3S-GE engine, a very very respectable powerplant but far larger and heavier than the ZZ series. I have seen one with my own eyes wedged in a previous-generation Vios here, really tight fit!
SabretoothSt Cloud FL · Mar 21, 2009#18
Sounds like I need to revamp the old "motor swap thread"
2az (New TC 2.4L Motor) Will not fit.

Reasons why,
1. Its a BIG motor compared to the Yaris motor, I mean yes it is small in comparrison to other 2.4L motors, but it is fairly too big to fit in the tiny Hatchback engine bay, even the sedan engine bay wouldnt hold that much.

2. The complete orientation of the motor is reversed from the Yaris, meaning that the hot side (exhaust) and cold side (intake) are reversed...This will only complicate things if you want to keep the ECU and cooling parts in their same area, IF you wedge the motor in the car, but the header is 3 centimeters from the radiator, your going to have a small issue. Or if its 3 centimeters from the ECU, problems once more. The hardest part of this particular swap, would be rebuilding the engine bay from the ground up to make everything fit and work in a harmonous manner. Plus there is the downfall of having to change either the complete setup of the engine bay, or the orientation of the motor...CUSTOM WORK, of course your going to expect it when it comes to exhaust and intake piping, but when you have to change drivetrain parts, who says that the TC transmission is even going to come close to fitting, and if even clear certain critical parts of the Yaris. Then your going to have to pray that after all this, you can bolt up to the origional driveshafts, if not...more custom and costly work.

3. IF you were to swap this in, there are better and smaller motors out there that can generate the same if not more HP than this engine. The 2az TC motor only produces about 160hp, the Xb version even less...Now compare that to a 1zz from the Celica (140hp) add intake, exhaust, header, pulleys and you are at the same HP level. Cram a 2zz in there and your looking at 170ish HP. A 4age Blacktop is around the same HP as the 2az. I am not saying the 2az is a bad motor, just there are more motors out there, than just the TC one.

4. Money, IF you are willing to spend this kind of money into a car, I would assume that more than likely you could have afforded a nicer/faster car. If you wanted 160hp to start, why not buy a last gen Civic SI hatch (Not trying to promote Honda, but just being honest).

5. With money comes another idea, instead of tearing apart EVERYTHING in hope that you can start new, take the existing motor, redo internals and try boost. Almost every application using a turbocharger out there is putting down 150WHP (WHEEL, not base), which is about 170bhp. I am not claiming that the 1nz (Yaris motor) is the best canidate for the forced induction market, but by no means does it have no potential...Just ask Garm


Oh and to clear up the cost of a 2az motor, cheapest one I found was $1100, no transmission, no ECU, no wiring harness, etc...cheapest with all that was about $2000, but with a 4spd auto, "Complete".

Oh, and heres the application list for all vehicles that have a 2azfe in them...
Most common application is the TC, and Camry
Toyota Camry (2002-2009)
Toyota Matrix XRS/Pontiac Vibe (2009-)
Toyota Corolla XRS (2009-)
Toyota Camry Solara (2004-)
Toyota RAV4 (2006-2008)
Toyota Highlander/Kluger (2001-2003)
Toyota Estima / Toyota Previa / Toyota Tarago
Toyota Alphard
Toyota Blade
Scion tC
Scion xB (2008-)
TreyzLong Island, NY · Mar 21, 2009#19
Originally Posted by Tamago ↑
www.monkeywrenchracing.com for all your 1zz/2zz needs
^^^
FTW! Have talked to the guys over there before. Very helpful.

Oh and the Tacoma has been done before for those that don't know (Drift Yaris)

I think the 2AZ would leave little to no room in the engine bay (especially for those with the liftback).

No room for boost unless you have some decent sized pockets. We all know with enough money, anything can be done.
KCALB SIRAYVirginia · Mar 21, 2009#20
Originally Posted by supmet ↑
link?



In what way is a 2.4L that is producing less power better than a 1.8 producing more? From what I hear the 2ZZ is a tight squeeze already. There's no way you'll be able fit a supercharger or turbo with the 2AZ(if it actually fits).
Thomas pretty said what i wanted to say. Both engines have what it takes to get up and go, no need for a link as we all know the aftermarket options for both of these engines. We already know a 2zz will fit in a Yaris, we've seen the pics and vids of this. Some sacrifice will have to be made for ac, etc. Bottom, line, it will fit

Originally Posted by eTiMaGo ↑
Very different engine characteristics, the 2ZZ needs to rev HARD to get its power, while a larger engine would be much more torquey and usable.

PK, if it's the latest model MR2 then yes, that would be a 1ZZ engine. Engine which was also used in the previous generation regular 1.8L Corollas. The 2ZZ (Celica, Matrix/Corolla XRS) is essentially the same engine, but with the VVTL-i head which, like Honda's VTEC, allows a high-RPM cam profile for an increase in power, like a second wind, if you will... These engines have been swapped in Yarii over here, as well as Puerto Rico, and I am sure in many other places.

If it's an older MR2 then you'd have the 2.0L 3S-GE engine, a very very respectable powerplant but far larger and heavier than the ZZ series. I have seen one with my own eyes wedged in a previous-generation Vios here, really tight fit!
Originally Posted by Sabretooth ↑
Sounds like I need to revamp the old "motor swap thread"
2az (New TC 2.4L Motor) Will not fit.

Reasons why,
1. Its a BIG motor compared to the Yaris motor, I mean yes it is small in comparrison to other 2.4L motors, but it is fairly too big to fit in the tiny Hatchback engine bay, even the sedan engine bay wouldnt hold that much.

2. The complete orientation of the motor is reversed from the Yaris, meaning that the hot side (exhaust) and cold side (intake) are reversed...This will only complicate things if you want to keep the ECU and cooling parts in their same area, IF you wedge the motor in the car, but the header is 3 centimeters from the radiator, your going to have a small issue. Or if its 3 centimeters from the ECU, problems once more. The hardest part of this particular swap, would be rebuilding the engine bay from the ground up to make everything fit and work in a harmonous manner. Plus there is the downfall of having to change either the complete setup of the engine bay, or the orientation of the motor...CUSTOM WORK, of course your going to expect it when it comes to exhaust and intake piping, but when you have to change drivetrain parts, who says that the TC transmission is even going to come close to fitting, and if even clear certain critical parts of the Yaris. Then your going to have to pray that after all this, you can bolt up to the origional driveshafts, if not...more custom and costly work.

3. IF you were to swap this in, there are better and smaller motors out there that can generate the same if not more HP than this engine. The 2az TC motor only produces about 160hp, the Xb version even less...Now compare that to a 1zz from the Celica (140hp) add intake, exhaust, header, pulleys and you are at the same HP level. Cram a 2zz in there and your looking at 170ish HP. A 4age Blacktop is around the same HP as the 2az. I am not saying the 2az is a bad motor, just there are more motors out there, than just the TC one.

4. Money, IF you are willing to spend this kind of money into a car, I would assume that more than likely you could have afforded a nicer/faster car. If you wanted 160hp to start, why not buy a last gen Civic SI hatch (Not trying to promote Honda, but just being honest).

5. With money comes another idea, instead of tearing apart EVERYTHING in hope that you can start new, take the existing motor, redo internals and try boost. Almost every application using a turbocharger out there is putting down 150WHP (WHEEL, not base), which is about 170bhp. I am not claiming that the 1nz (Yaris motor) is the best canidate for the forced induction market, but by no means does it have no potential...Just ask Garm


Oh and to clear up the cost of a 2az motor, cheapest one I found was $1100, no transmission, no ECU, no wiring harness, etc...cheapest with all that was about $2000, but with a 4spd auto, "Complete".

Oh, and heres the application list for all vehicles that have a 2azfe in them...
Most common application is the TC, and Camry
Toyota Camry (2002-2009)
Toyota Matrix XRS/Pontiac Vibe (2009-)
Toyota Corolla XRS (2009-)
Toyota Camry Solara (2004-)
Toyota RAV4 (2006-2008)
Toyota Highlander/Kluger (2001-2003)
Toyota Estima / Toyota Previa / Toyota Tarago
Toyota Alphard
Toyota Blade
Scion tC
Scion xB (2008-)
In short, i found a 2az, ecu and trans for $900 with 2000 miles on it...so I snagged it🤘 Orientation on any engine swap will require mods to the engine bay with the LB. No one is saying it easy, but it can be done. It just needs to be thought out and not just thrown in there. Def the way for any beginner would be to start with there 1nz and build it to their liking. Finding a black top that hasn't been beat to hell is hard these days, so you take what you can get and if you have the know how, then any comp engine with a higher HP/TRQ will do our car just fine. Take Foth's 3az in his drfit Yaris. Not the greatest engine in the world and really only one "good" aftermarket company that makes items for this engine. Most pieces are one off items, but the end result is it's a machine that will produce. I know of three local 2az's that are pulling over 600 hp easliy. Why? They had the know how and were able to research their cars ability. 👍
eTiMaGoBangkok, Thailand · Mar 22, 2009#21
yes, it needs to be added, any swap for any engine is always possible, just requires varying amounts of skill, time and money (usually the latter).

Mike, go watch Monster Garage to get in the mood 😁

And yes, the 2AZ has pretty good aftermarket support thanks to the tC...
turboecho2005Ottawa, Ontario · Mar 22, 2009#22
I would love to do a 3S-GTE swap. thoes motors are extremely stout and i'd be willing to go as far as saying they are better then the 2JZ. Might even be the best toyota 4-6 cylinder engine toyota ever produced.
eTiMaGoBangkok, Thailand · Mar 22, 2009#23
Doesn't Top Secret or some other badass Japanese tuning brand have a 3S-GTE powered Supra?
turboecho2005Ottawa, Ontario · Mar 22, 2009#24
http://www.topsecretjpn.com/gt300.shtml

yes they do ;)

Then again if money were no object then a 7age (7afe with a 20valve head and offset crank) would be the way to go. Stroke it to 2.0 and you have a very nice motor.
SabretoothSt Cloud FL · Mar 22, 2009#25
the concept is, whats the most na horses you can pull?

with all the lack of space, boosting the car would not be much of a choice.
eTiMaGoBangkok, Thailand · Mar 22, 2009#26
once again, the wallet's the limit... Most legendary would be those 11,000RPM 4A-GE's that can get what, 250hp out of a 1.6L engine?
SabretoothSt Cloud FL · Mar 22, 2009#27
+1 to that...

A 8,000 RPM 170whp motor would be plenty to get this car around corners

That is why the top of my list is a 4age blacktop, with a 6spd lsd tranny...

It will have plenty of room in the engine bay of a hatch, plenty of upgrades for getting to get even up to 190ish whp with a flash and tune.

Imagine a 190whp Yaris whipping around a corner with a stiff set of coilovers, just blowing past a car that costs double and has double the horses of a stock Yaris...pure magic to my imagination.
turboecho2005Ottawa, Ontario · Mar 22, 2009#28
Originally Posted by Sabretooth ↑
+1 to that...

A 8,000 RPM 170whp motor would be plenty to get this car around corners

That is why the top of my list is a 4age blacktop, with a 6spd lsd tranny...

It will have plenty of room in the engine bay of a hatch, plenty of upgrades for getting to get even up to 190ish whp with a flash and tune.

Imagine a 190whp Yaris whipping around a corner with a stiff set of coilovers, just blowing past a car that costs double and has double the horses of a stock Yaris...pure magic to my imagination.
I wouldn't say there is plenty of room... infact the 4age blacktop with the 6 speed transmission wont' fit between the stock frame rails... its a very tight fit.
SabretoothSt Cloud FL · Mar 23, 2009#29
Question is, will it fit in a 07 Yaris or newer? I know that yours was crammed into an Echo hatch, so I am unaware of the possible structural differences between the two. But my gut would say if it doesnt work on the old, more than likely it will not work on the new.

Just keeping in mind if it to be a AutoX car only, only real gears needed are 1 and 2
YaritoTrujillo Alto, PR · Mar 24, 2009#30
Here in Puerto Rico there is a Yaris HB that swap the engine by one of a corolla XRS. I thinks is a 2AZ dual vvt-i. 160Hp in a HatchBack?! Thats insane
SabretoothSt Cloud FL · Mar 24, 2009#31
You see the original XRS/TRD Corolla featured the 2zz-ge which was the same motor placed in the Celica GT-S and Matrix XRS... It would be possible to place the 1.8L 2zz in the HB, but I am still unconvinced that the 2az is small enough or compact enough to it inside the tiny Hatchback engine bay.

Not trying to be a dick, but I personally would like to have either some photo evidence, followed up with a video of it running. Anything to prove that it would be plausable
SabretoothSt Cloud FL · Mar 24, 2009#33
Fun stuff!
whooppee777Maryland · Mar 24, 2009#34
Originally Posted by ChinoCharles ↑
http://store.monkeywrenchracing.com/...roducts_id=817

Compression ratio: 9.0:1 or 12.3:1!!! That would be a NASTY all-motor Yaris!
once i pay off the yaris and pick up a cheap beater car to become my new DD i'm swapping in a built 2ZZ, with turbo. i decided this just now. cali will be dethroned for having the most bad ass yaris. its just not happening anytime soon. hahaha
turboecho2005Ottawa, Ontario · Mar 24, 2009#35
mid engine RWD 3sgte setup in a yaris.... that would be the ultimate....

maybe i should buy a yaris just to do this swap! the 2006 used cars are getting cheap.
SabretoothSt Cloud FL · Mar 25, 2009#36
My dream Yaris is cramming an STI motor in this car, then changing from FWD to AWD.
CtrlAltDefeatIndianapolis IN · Mar 25, 2009#37
Originally Posted by turboecho2005 ↑
mid engine RWD 3sgte setup in a yaris.... that would be the ultimate....

maybe i should buy a yaris just to do this swap! the 2006 used cars are getting cheap.
Originally Posted by Sabretooth ↑
My dream Yaris is cramming an STI motor in this car, then changing from FWD to AWD.
sure while were at it, lets make a total carbon fiber body for the thing, titanium everything else and 22" wheels 😁
CtrlAltDefeatIndianapolis IN · Mar 25, 2009#38
and Kitt to keep you company on your way to your new mansion!
SabretoothSt Cloud FL · Mar 26, 2009#39
i think the best naturally asperated yaris would be using a beams 2 liter motor from the mr2/ altezza...they come in at around 200bhp, but i cant see them having a whole lot of mods, other than intake exhaust...maybe a retune of the ecu.