Hey guys.. Anyone here purchased a WIX engine and cabin air filter for their Yaris?.. How did you find the quality and fit?
thanks
thanks
34 posts · 16,487 views
I like their oil filters better than their air filters. Their cabin air filters seem a little bit restrictive.Originally Posted by CB900F2 ↑Hey guys.. Anyone here purchased a WIX engine and cabin air filter for their Yaris?.. How did you find the quality and fit?
thanks
Purolator is a good filter, as well as many others including WIX/NAPA.Originally Posted by toad ↑.....so wix is pretty good? how about purolator? ?
You could try Nippon or Beck/Arnley. I was on a Honda forum not long ago and Nippon tested best, so I'd imagine that they're pretty good across their entire P/N line.Originally Posted by TheSilkySmooth ↑I want to know why Honda, Acura and Subaru are using Fram (Honeywell) to make their Service part replacement filters? I just got a filter from subaru and its made by fram! maybe the custom ones made for them are better?
Unless they fixed it in the past couple months, the purolator didnt fit correctly on my 08 yaris 3 dr. It only engaged 2 threads fully tightened and thats not enough. IMO the base plate is too far below the gasket surface. Youll see on the oem the baseplate is bumped UP towards the gasket surface instead of concave. I like purolator but this just didnt fit.Originally Posted by Yaris Hilton ↑I haven't had to put any filters on my new Yaris, but I've used both Wix and Purolator filters for many years with complete satisfaction. I'd put a new Wix air filter in my daughter's Echo not long before trading it, in fact. It fitted perfectly.
did you use the puralator pure one or the regular filter? I have been considerig the pure one over oem. I made the same switch with my crv( fit is perfect) since fram makes the Honda filter and they are the same price.Originally Posted by TheSilkySmooth ↑Unless they fixed it in the past couple months, the purolator didnt fit correctly on my 08 yaris 3 dr. It only engaged 2 threads fully tightened and thats not enough. IMO the base plate is too far below the gasket surface. Youll see on the oem the baseplate is bumped UP towards the gasket surface instead of concave. I like purolator but this just didnt fit.
I've still got 1 PureOne in stock, and I'm due an oil change by next week. I'll let my 3 Beck/Arnley oil filters sit on the shelf for the time being and use up the last PureOne (yellow, not the old blue version) and pay attention to how many turns it takes from thread start to 3/4-1 turn tight.Originally Posted by TheSilkySmooth ↑Unless they fixed it in the past couple months, the purolator didnt fit correctly on my 08 yaris 3 dr. It only engaged 2 threads fully tightened and thats not enough. IMO the base plate is too far below the gasket surface. Youll see on the oem the baseplate is bumped UP towards the gasket surface instead of concave. I like purolator but this just didnt fit.
Thanks, man! I beginning to think I have a unique Yaris. I too have an 08 3 dr 5S.🙂Originally Posted by 1stToyota ↑I've still got 1 PureOne in stock, and I'm due an oil change by next week. I'll let my 3 Beck/Arnley oil filters sit on the shelf for the time being and use up the last PureOne (yellow, not the old blue version) and pay attention to how many turns it takes from thread start to 3/4-1 turn tight.
Just did my OC with some of that $3.99 Pennzoil Platinum 🙂Originally Posted by TheSilkySmooth ↑Thanks, man! I beginning to think I have a unique Yaris. I too have an 08 3 dr 5S.🙂
who has the platinum on sale for $3.99 right now? i'm needing to change the other car's oil very soon. thanks!Originally Posted by 1stToyota ↑Just did my OC with some of that $3.99 Pennzoil Platinum 🙂
From thread start to hand tight, the PureOne filter was a little more than 2 3/4 turns; just shy of 3 full turns for the Amsoil Ea filter that was on there.
It was O'Reilly Auto Parts, but it ended on the 14th...I posted the info about 2 weeks ago. Sorry that you missed it.Originally Posted by toad ↑who has the platinum on sale for $3.99 right now? i'm needing to change the other car's oil very soon. thanks!
My car must have a short nipple on the filter bracket. Although I didnt try a pure one. How's that PP running?Originally Posted by 1stToyota ↑Just did my OC with some of that $3.99 Pennzoil Platinum 🙂
From thread start to hand tight, the PureOne filter was a little more than 2 3/4 turns; just shy of 3 full turns for the Amsoil Ea filter that was on there.
yeah, that's what i get for waiting.Originally Posted by 1stToyota ↑It was O'Reilly Auto Parts, but it ended on the 14th...I posted the info about 2 weeks ago. Sorry that you missed it.
IDK for sure, but I think it was Advanced Auto, or Parts+ ?? that had a good deal on Castrol Syntec with filter ($25.00/5qts w/ K&N oil filter)
It's here somewhere, don't know how long that sale was for. Another poster posted it.
I don't know if it's the PP or the PureOne, or both, but the engine is so quiet now I almost thought it was all in my head. I drove all the way home with the radio off so I could get a good listen--it is quieter during shifts and while pulling into the garage; that's when I'd notice the most noise, when clutching/revving while slowly pulling into the crowded garage. PP and PureOne is the best combo I've used so far.Originally Posted by TheSilkySmooth ↑My car must have a short nipple on the filter bracket. Although I didnt try a pure one. How's that PP running?
Idle-3500ish is probably my operating range. Just guessing tho', don't have a tach. ENEOS 5w-30/Ultra-8 made the most noise, but still not that bad. Amsoil HP 5w-30/Wix made Amsoil Ea filter was a small improvement. Maybe it was that space wasting Wix bypass valve? Pennzoil Platinum 5w-30/PureOne made an even bigger improvement.Originally Posted by TheSilkySmooth ↑Its crazy but alll these little things make a difference! I think the purolator prem + / royal purple gave the best 4000-6000 power, and the wix/motul 5-30 gave the best 1500-3500. Must have something to do with oil viscosity and flow restriction in the filter, though the bypass must be open at WOT at 5000+rpm.
well, now i'm DEFINATELY glad i chose the Pennzoil Platinum. i had found an ENEOS distributor nearby(they only sold them in cases of 8 quarts?), but decided to save a few bucks based on the reviews i've read on here. like you said, it does seem to idle a little quieter(maybe it's my imagination), but mainly i made the switch because my car isn't just transportation TO my job - it IS my job! i'm getting ready to put the same thing in the wife's yaris as soon as i see a sale on it somewhere.Originally Posted by 1stToyota ↑Idle-3500ish is probably my operating range. Just guessing tho', don't have a tach. ENEOS 5w-30/Ultra-8 made the most noise, but still not that bad. Amsoil HP 5w-30/Wix made Amsoil Ea filter was a small improvement. Maybe it was that space wasting Wix bypass valve? Pennzoil Platinum 5w-30/PureOne made an even bigger improvement.
You can use the WIX 51396 if you want a slightly longer filter with more surface area. NO worries, the 96 has the same specs for bypass, flow and beta ratio. Purolator kills the wix for flow though. If you wail on the hamster, you want the Purolator.Originally Posted by Jansen ↑I switched to Pennzoil Platinum and a Wix 51394 filter at the same time. I like how they put the flow rates and particle filtration information up on their website, not too many filter companies do that.
I was interested in the EA009 from AMSOIL, but couldn't find it in Toronto. Oh well, saved a couple of bucks.
I use to like WIX until I saw a cut-away of one: high quality and cool looking bypass valve, but very small filter media because of the large size of the bp valve.Originally Posted by TheSilkySmooth ↑You can use the WIX 51396 if you want a slightly longer filter with more surface area. NO worries, the 96 has the same specs for bypass, flow and beta ratio. Purolator kills the wix for flow though. If you wail on the hamster, you want the Purolator.
Agreed. I'm wondering if the NAPA "pro select" (not gold) uses a different bypass arrangement. I got one on there now - but I have a Purolaotor-made Bosch going on next. Ist you still loving the Pennzoil Platinum? I was thinking that or Mobil1 AFE 0w-30, it has a good additive package according to virgin oil analyses I read, and its on sale at wallyworld right now for about $22/5qtOriginally Posted by 1stToyota ↑I use to like WIX until I saw a cut-away of one: high quality and cool looking bypass valve, but very small filter media because of the large size of the bp valve.