PETERPOOPOriginal postOahu · Mar 14, 2009#1Here's my new Magnaflow muffler that I will be using for my new exhaust setup. It has a 2.25" in and two 3" out dual tips. It's from their street performance line. I wanted a different look. I hope it sounds good, it should. 👍
Going to install my Megan header tomorrow and next weekend drive around and get quotes for a header back exhaust (no cats) with mandrel bends.
Picture not included in this copy
Picture not included in this copy
Replies 29
GideonSunnyvale, CA · Mar 14, 2009#2Almost makes me wish I waited for the muffler when I was doing my exhaust! They had to order it and it would have taken two days, which was two days too long! lol
Can't wait to see it/hear it on the car. 👍
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#3PETERPOOPThread starterOahu · Mar 14, 2009#4Do you have 2.25" exit tips or 3"? The top of the tips look the be touching the bottom of your bumper. Has it burned the paint or anything? I might have mine a little lower than yours, but since my tips are angled, I think i'll be ok.
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#5I believe this is the one that I have:
http://www.magnaflow.com/02product/s...e=main&id=7970. 2.25" in and out. My tips, I think they are either 2.5 or 3 inches. hahaha. They're not touching the lip, there's a few mm of room. hahaha. But nope, no burnt paint, and not even any carbon buildup. No warping, no worries. 🙂 *knocks on wood*
GideonSunnyvale, CA · Mar 14, 2009#6 Originally Posted by
Kaotic Lazagna ↑
Maybe it's the video but it doesn't sound that deep. 🤷
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#7 Originally Posted by
Gideon ↑ Maybe it's the video but it doesn't sound that deep. 🤷
Combination of both the video and the fact that it hasn't been broken in yet. hehe, I added that little bubble thing because I thought the same thing. A lot of people are surprised that the sound comes from such a small car. Someone even asked if I had an LS1 under the engine. hahahaha, yeah, I know he was exaggerating, but he just didn't imagine my car pulling up when he heard the muffler first. 😆
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#8If I have time tomorrow, I'll borrow my bro's camera again and shoot an outside and/or an inside video. Don't expect crazy runs, as my mom lives in a densely populated area, so it would be normal driving.
GideonSunnyvale, CA · Mar 14, 2009#9 Originally Posted by
Kaotic Lazagna ↑ Combination of both the video and the fact that it hasn't been broken in yet. hehe, I added that little bubble thing because I thought the same thing. A lot of people are surprised that the sound comes from such a small car. Someone even asked if I had an LS1 under the engine. hahahaha, yeah, I know he was exaggerating, but he just didn't imagine my car pulling up when he heard the muffler first. 😆
lol yeah, my coworker was walking down the street when I drove by and he said he thought it was an entirely different (more powerful) car by the sound until he saw me. 😆
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#10 Originally Posted by
Gideon ↑ lol yeah, my coworker was walking down the street when I drove by and he said he thought it was an entirely different (more powerful) car by the sound until he saw me. 😆
LOL.
Sorry for the threadjack Peter.
PETERPOOPThread starterOahu · Mar 14, 2009#11I hate all of you guys! ;) Naw, we're the Magnaflow crew.
1NZYaris1New Zealand · Mar 14, 2009#12Havn't you installed it yet , shit the S/C was installed in half this time😆
eTiMaGoBangkok, Thailand · Mar 14, 2009#13yeah man come on, and no videos yet? 😁
you didn't mention, you'll be center-mounting it, right? should look pretty damn good with the angled tips!
kimonaHuntington Bch, CA · Mar 14, 2009#14Yup, that will make one fine looking centre mount!
thebarberGrand Rapids, MI · Mar 14, 2009#15thats one ugly muffler...
PETERPOOPThread starterOahu · Mar 14, 2009#16I'm not sure if I'll be center mounting it or just having it on the right of the license plate. Hmmm, decisions decisions.
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#17For the Euro tip/look, I like it off center to one of the sides. If the tips were straight, then center FTW! 😁
I'm uploading a video of how mine sounds. I just took it earlier today. I'll post it up in a bit. I'm going to go and cut my hair. Back in a few.
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#18Bah! My bro went into the bathroom already!!!!!!!!!!!
PETERPOOPThread starterOahu · Mar 14, 2009#19So upload it then!
Kaotic LazagnaCentral Valley, CA · Mar 14, 2009#20LOL. Sorry, I went to eat some steak that my mom cooked, then went to cut my hair. I also went back to Sacramento (1 1/2 hours away from my mom's). But here it is. Nothing special, just showing how it'll sound daily driven.
http://www.youtube.com/watch?v=R-cwGtqNCqY&fmt=18 Best listened with headphones/earbuds.
Now onto studying.
PETERPOOPThread starterOahu · Mar 15, 2009#21haha nice nice. doesn't sound bad! However, I might be running with no resonator and will have no cats. So mine will definately be louder! Eeek. I might end up putting a resonator on.
LtNoogieWest Hills, CA · Mar 15, 2009#22I'm sure you heard how loud the TRD exhaust is in my video. Obnoxious.
PETERPOOPThread starterOahu · Mar 15, 2009#23lol yes. I tell people the TRD exhaust is one of the loudest, but they all deny it. Atleast you admit it!
Kaotic LazagnaCentral Valley, CA · Mar 15, 2009#24 Originally Posted by
PETERPOOP ↑ haha nice nice. doesn't sound bad! However, I might be running with no resonator and will have no cats. So mine will definately be louder! Eeek. I might end up putting a resonator on.
That's going to be ear deafening without the cats. And it will not sound anywhere near like mine. The resonator should help if you don't have cats. lol.
I had Flowmasters on my GTI, custom 2.25" from the cat-back w/o any resonators. I could hear it loud and clear from 2-3 blocks away. 😆 Don't really know how that's going to help you decide tho.
PETERPOOPThread starterOahu · Mar 15, 2009#25I'm going with a resonator. I went to a local tuner/exhaust shop today and they gave me a quote. Hopefully will be getting it done this Wednesday, or Saturday.
Kaotic LazagnaCentral Valley, CA · Mar 15, 2009#26 Originally Posted by
PETERPOOP ↑ I'm going with a resonator. I went to a local tuner/exhaust shop today and they gave me a quote. Hopefully will be getting it done this Wednesday, or Saturday.
What's the estimation?
PETERPOOPThread starterOahu · Mar 15, 2009#27For all mandrel bends, aluminzed piping, two bungs, resonator, and labor = somewhere between $500-600$.
Kaotic LazagnaCentral Valley, CA · Mar 15, 2009#28 Originally Posted by
PETERPOOP ↑ For all mandrel bends, aluminzed piping, two bungs, resonator, and labor = somewhere between $500-600$.
Damn! Well, for that price, I'd expect it to be mandrel bends.
PHXDEMONPhoenix, AZ · Mar 15, 2009#29You still don't have this thing installed. Stop teasing us 🤣
PETERPOOPThread starterOahu · Mar 15, 2009#30Hah. I'm sorry. This IS taking forever. Lame!