hey i guys... i just got my exedy hyper clutch kit.... just wondering if anyone has installed one b4?? and if there is any problems installing it????
exedy hyper clutch kit...
15 posts · 6,305 views
Replies 14
"hyper" - what is that? I have a stage I, very twitchy but I like it.
i dont know.. maybe that just wat they call it... it comes with a pressure plate, clutch, and a lighten flywheel..... is ur clutch made by exedy too??
yes. This is what I have (stage 1 in case the link isn't accurate):
http://www.exedyusa.com/race/Clutch_Specifications
I'll probably go with a Stage 2 with my motor swap.
http://www.exedyusa.com/race/Clutch_Specifications
I'll probably go with a Stage 2 with my motor swap.
Eh, Hyper clutch is good for high torque and i dont suggest you to install on yaris. Go with Stage 1 like cali yaris (Garm) told ya.
its too late now haha.. its already bought!! thinking of putting it in this week or next week... why not the hyper kit?? theres going to be a big difference?? u think?
From Exedy's site. 2x OEM? Probably gonna be pretty stiff!!
Part Number: TH06SD
All Hyper Clutches come with a steel flywheel and a 6-puck disc with cerametallic facing, and a spring center damper. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and generally higher than other single plate clutches.
Specs
Number of Discs Single
Spring Damper Discs Sprung Center Disc
Push / Pull PUSH TYPE
Disc Outer Diameter 200mm
Spline Teeth / Major Diameter 21T / 24.1mm
stiff?? as on sghifting or the clucth pedal??
cali_yaris...by the way u have the quote for me/?
got the clutch put in.... it is very stiff and sensitive!!..... keep on stalling!! hahah
5 attachments not included in this copy
yeah, I still stall with my stage 1 sometimes. 🙂
now i dont smell any clutch burning when i floor it to 5-6000rpm!!
nice! yeah im sure its stiff very stiff lol.
You must have had a crappy stock clutch when you floor it in that range.Originally Posted by ae92trueno7 ↑now i dont smell any clutch burning when i floor it to 5-6000rpm!!
i looked at the old clutch and it wasnt that bad!! it might be the supercharger... pressure plate was not clamping enough causing the clutch to slip...🤷