asulkanOriginal postkamloops · Mar 7, 2009#1Ive recently bought a Yaris and ive noticed every time i put something on my passenger seat the alarm comes on for the seatbelt to be buckeled up. I took matters into my own hands and cut the wire that is connected to the seat. The car subsequently will not start now even after ive reconnected the wires.
I have tried to reset the computer by disconnecting the battery, checked all the fuezes and nothing seems to work.
If anyone knows how to trouble shoot this I would be very greatfull. I live in the country and a tow bill will be an outragous amount haha
thanks
simon
Replies 8
1NZYaris1New Zealand · Mar 7, 2009#2Have you checked the fuses under the bonnet as well as the ones under the
main panel in car 🤷 and the fuse on the battery
Does the car turn over or is there nothimg at all when you turn the key on
is your Yaris auto or manual🤷
take it to the dealer? 🤷 but i second 1NZYaris1's statement: check fuses. If you happen to cut a wire that has a voltage on it and your tool comes into contact with something that is grounded, its very possible that it fried a fuse.
nemelekArizona · Mar 8, 2009#4Cut first ask questions later. There has been a few posts on disabling the seat belt alarm. If you do bring your car to the dealer have them turn off the alarm.
bzinn 1University Place,WA · Mar 8, 2009#5oh my goodness never cut wires.....the sensor is part of the safty restraint system and is extremly expensive to repair....you can either buckle the seatbelt or wait the 60 seconds till the alarm goes off...oh my....this is probably a fuse you blew,but it could be worse....
asulkanThread starterkamloops · Mar 10, 2009#6Thank you everyone for your help. I found the problem. like alot of you said check the fuzes. I only saw the one under the hood didnt realise there was one beside the wheel. It blew to fuzes.. one on both.thanks again. cars runnin fine!
thanks!
firebobon the road · Mar 10, 2009#7 Originally Posted by
nemelek ↑ Cut first ask questions later. There has been a few posts on disabling the seat belt alarm. If you do bring your car to the dealer have them turn off the alarm.
I was told that was a $10 job if they have it before the start working on it for something else. Other wise it’s $30. I’m sure it’s different by what dealer your at. I asked to late when I was at the shop or mine would be done. It would have been $30 and an hour weight I was told.
I didn’t know it would turn off after 60 seconds. It gets me when I have something in the seat and put my hand on the seat to change up positions for a few minutes.
nemelekArizona · Mar 11, 2009#8Mine was free.
firebobon the road · Mar 11, 2009#9I think it was the dealer I was at. I’ll get it done next time I’m at a dealer if I think about it. My wife works with me so it’s not often that one of us is in the car alone. The good old life on the road with your wife and what makes it even better is the tinny car.