Yarisworld Archive

Does anyone have the glowshift a-pillar gauge pod?

32 posts · 10,392 views

Sodium DuckOriginal postWestern Mass. · Mar 2, 2009#1
http://www.glowshiftdirect.com/06-07...illar-pod.aspx
Glowshift’s 06 - 07 Toyota Yaris Liftback Triple Pillar Pod is a triple gauge pod specifically designed for your Yaris and will mount three 52mm or 2 1/16th inch gauges while bringing a unique style and look to your vehicle’s interior. Each A-pillar pod is crafted from the highest quality ABS plastic available to withstand cracking, fading, and warping while still giving your Yaris a custom fit and finish. This pod is currently offered in a clean OEM black style while still offering the user the ability to paint the pod if needed. All necessary mounting hardware and instructions are included with each order.

* Full Size Black Triple Pillar Pod
* Holds three 52mm or 2 1/16th inch gauges
* Crafted from the Highest Quality ABS plastic Available
* Includes Mounting Hardware & Instructions
* 1 Year Warranty & Free Installation Support


Right, so... it's an OEM BLACK? a-pillar... Okay, don't got that. It only fits 06-07's... Okay, don't got that... 😁🙄

As long as the fit and finish is ok, anybody know?




Is this it? More pics if it is?
Link to a thread or page that is not in the archive

Replies 31

LtNoogieWest Hills, CA · Mar 2, 2009#2
Yikes. I just bought one. This weekend, I spraypainted it with Valspar primer which is almost the same color as the regular interior plastic pieces. Next, I'll spray it with some eggshell clearcoat to protect the primer.

Mike, are you saying that the old a-pillar molding stays on the car and this just mounts on top of it? It kinda makes sense now considering that it had no tabs to connect to the rest of the car.
Sodium DuckThread starterWestern Mass. · Mar 2, 2009#3
Huhmmm... Well, please post pics when you finish it up Noogie. So you are using it at the a-pillar totally? You didn't attach it to the original, if I understand you correctly?
Sodium DuckThread starterWestern Mass. · Mar 2, 2009#4
freakin ninja posts!
LtNoogieWest Hills, CA · Mar 3, 2009#5
I painted the Glowshift gaugepod this weekend. Next is a satin clearcoat and then it goes into the car. I am disappointed that it mounts over the exisitng gaugepod and does not replace it. They give you three screws to fasten it to the existing pillar. Lame

Picture not included in this copy

Picture not included in this copy
yarisugiハワイ · Mar 3, 2009#6
looks really nice. It looks like you could almost replace the factory one... maybe?
LtNoogieWest Hills, CA · Mar 3, 2009#7
I don't know what holds the existing a-pillar cover on. This thing has no clips. I'll try to see how hard it is to remove the a-pillar cover this weekend.
KCALB SIRAYVirginia · Mar 4, 2009#8
I'd just 3M that bad boy in and call it a day so you don't have to use the screws
LtNoogieWest Hills, CA · Mar 4, 2009#9
Yeah, that's a thought. I just need to choose the third gauge and stick the entire assembly on one time.
KCALB SIRAYVirginia · Mar 4, 2009#10
do they make a Bad Ass Boosted gauge yet?
LtNoogieWest Hills, CA · Mar 4, 2009#11
No just the "I Gotta Have Mo Power Blues" gauge.
PHXDEMONPhoenix, AZ · Mar 4, 2009#12
Originally Posted by KCALB SIRAY ↑
I'd just 3M that bad boy in and call it a day so you don't have to use the screws
+1 I would 3m it. Camelll Does the pod bother you and create blind spots when you drive around? The A pillar stock in my liftback without any gauges gets to me sometimes 🤷
1NZYaris1New Zealand · Mar 4, 2009#13
Originally Posted by LtNoogie ↑
I painted the Glowshift gaugepod this weekend. Next is a satin clearcoat and then it goes into the car. I am disappointed that it mounts over the exisitng gaugepod and does not replace it. They give you three screws to fasten it to the existing pillar. Lame

Picture not included in this copy

Picture not included in this copy
Wow do they make one for Right hand drive cars
Sodium DuckThread starterWestern Mass. · Mar 4, 2009#15
Originally Posted by camelll ↑
Another thing that bothers me a little bit even though it is no big deal is that the texture of that pod does not match the stock pillar. When I had mine done I had them sand the passenger side pillar and paint that as well so it matched the drivers side.
Ditto, that's why I'm going for the above, and the blind spot issue.
Doc ZaiusOttawa, ON, Canada · Mar 4, 2009#16
Thomas (eTiMaGo) has his on the dash as well. Check his garage for pix.

I'm still debating...
33OHDover, Ohio · Mar 4, 2009#17
I mounted my original tach to my dash, it lights up and glares off the windshield at night. Super annoying.

I bought the glowshift A-pillar, and now I'm waiting for it to get warmer so I can paint it/install it..
LtNoogieWest Hills, CA · Mar 4, 2009#18
Ryan, the color you see is Vaspar primer. It's a really good match for the OEM color and sticks well to the plastic.
LtNoogieWest Hills, CA · Mar 4, 2009#19
Originally Posted by Doc Zaius ↑
Thomas (eTiMaGo) has his on the dash as well. Check his garage for pix.

I'm still debating...
Now I am too. I did not realize that it would be a blindspot issue. luckily, the part was cheap.
LtNoogieWest Hills, CA · Mar 10, 2009#20
Originally Posted by Sodium Duck ↑
FWIW, I think I'll be going with something like this. I'll have an Ecogauge, tachometer, and volt meter possibly.

http://cgi.ebay.com/ebaymotors/52mm-...Q5fAccessories
I just ordered the same pod. I'll decide when it get's here which one I like more.
Sodium DuckThread starterWestern Mass. · Mar 11, 2009#21
Please post pics up when you get it. Since the Ecogauge deal crapped out, I've put my gauges on hold. But I am still interested in what it looks like in real life, and on the dash, etc.
LtNoogieWest Hills, CA · Mar 11, 2009#22
I was not happy that the a-pillar pod is too large to just pop on. I had to go buy a Dremel kit last night so that I can cut it down to size. I'll probably just leave the triple pod black since it matches the dash.
LtNoogieWest Hills, CA · Mar 14, 2009#23
The pod looks and feels kinda chintzy but I guess I can't expect much for $9.99. The hole in the back is too small for my autometer connectors to fit through so I'll have to drill out bigger holes.

Each pod can be twisted to give you whatever view you want of the gauge so I did that to show you.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

The a-pillar pod from Glowshift is larger than the stock a-pillar so I'll be doing some cutting there too. What a PITA.
Sodium DuckThread starterWestern Mass. · Mar 14, 2009#24
Hmmm, interesting. Do you think you're going to use it?
LtNoogieWest Hills, CA · Mar 14, 2009#25
I just wired it up. I'm going to tape it onto the dash and then make a video because I need to know if the gauges are working correctly.
Sodium DuckThread starterWestern Mass. · Mar 14, 2009#26
sweeeet, can't wait.
LtNoogieWest Hills, CA · Mar 14, 2009#27
Here's a picture of the temporary setup until I rework the a-pillar gauge pod. Note the four velcro tabs holding it down. Blue painters tape and duct tape does not want to stick to the dash.

Picture not included in this copy
Sodium DuckThread starterWestern Mass. · Mar 15, 2009#29
very cool
LtNoogieWest Hills, CA · Mar 15, 2009#30
Ok, one gripe about putting the gauges in that location. That nice shiny metal bezel around the gauges reflect onto the windshield during the day. In the evening, the backlighting also shows up on the windshield.

I may have to put a black shroud or something over it.


Picture not included in this copy

Picture not included in this copy
mmxcixTexas · Mar 16, 2009#31
Do they have a stick on glow shift gauges just like them stick on sun/moon roof? HAHAHA
LtNoogieWest Hills, CA · Mar 16, 2009#32
Originally Posted by mmxcix ↑
Do they have a stick on glow shift gauges just like them stick on sun/moon roof? HAHAHA
Just go to the Autometer web site. Print a color picture of the gauges you want to "install" and stick them all over your dash. I don't know how you would illuminate them at night though.😛