Yarisworld Archive

New audio + Today's DIY project

24 posts · 8,707 views

TEHxFALLEN V1.2Original postCalabasas, CA · Feb 27, 2009#1
Got real bored today and took the time to build myself a housing for my amp. I was trying my best to conceal any exposed wires and making the trunk a bit more prettier. So here it is:

(Before I get flamed about my harness' mounting location, I DON'T use my harness, they're just bling until I have a proper harness bar.)

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Without the hatch cover:
Picture not included in this copy
With the hatch cover:
Picture not included in this copy
The back:
Picture not included in this copy
Picture not included in this copy

My next project is to fabricate a cover so that you cannot see my amp and sub from the outside.

Spent less than $40 on all materials:

$9 on 6'x3' black carpeting - AutoZone
$2 on nails - HomeDepot
$3 on Gorilla wood glue - HomeDepot
$20 on wood and planks (more than I should have really spent) - HomeDepot

I also bought a 11"x14" acrylic board along with some spacers (1/2") and some decorative screws to place on top of it. I heard that you shouldn't fully enclose an amp because it could overheat, so I'll leave it to you guys to help me debate if I need the acrylic board or not. Just want it to look nice..

Another thing I forgot to mention is that I have raised the amp 1/2" on wood planks, to allow for easier heat dissipation.

Replies 23

dg4rezLas Vegas, NV · Feb 27, 2009#2
wow looks really good
TEHxFALLEN V1.2Thread starterCalabasas, CA · Feb 27, 2009#3
Thanks! 👍
TEHxFALLEN V1.2Thread starterCalabasas, CA · Feb 28, 2009#4
I had a roll of velcro which I used long strips of, to attach to the bottom edges of the box. Went out looking for a crazy road to drive on, and no movement at all! I then tried pulling the box off, and boy does that thing grips hard on my carpet lol.

I preferred this over screwing the box down, or even adding a hinge to flip the top open when I need to change a fuse or get to a wire.
pennyracergrants pass · Feb 28, 2009#5
can you get to the spare tire ? :))
ChinoCharlesOH · Feb 28, 2009#6
Wiring is extremely clean. Good job.
thewifesyarisReno, NV · Feb 28, 2009#7
Being an open cabin why do you face the sub towards the lid. I would face ti up or to the drivers side, I bet you get a lot of rattle with this setup.

Besides that it looks awfully clean.
AltitudeColorado · Feb 28, 2009#8
Excellent clean install.

One thing though - velcro ain't gonna hold those things down should you ever (hopefully not) get into an accident. I wouldn't want those heavy ass boxes to go flying and risk slamming you in the back of the head. Mount those things!
TEHxFALLEN V1.2Thread starterCalabasas, CA · Feb 28, 2009#9
Originally Posted by pennyracer ↑
can you get to the spare tire ? :))
Of course I can! Everything is mounted on a board of wood that's bolted down on top of the trunk lid for strength! I kept that in mind as I wanted goodlooks without sacrificing convenience.

Originally Posted by ChinoCharles ↑
Wiring is extremely clean. Good job.
Thanks ChinoCharles!!

Originally Posted by thewifesyaris ↑
Being an open cabin why do you face the sub towards the lid. I would face it up or to the drivers side, I bet you get a lot of rattle with this setup.

Besides that it looks awfully clean.
I was thinking about facing the sub towards the front. But remember, I am looking to hide it from other people viewing it from the outside. So I won't be going that route, seeing that I won't be able to see my sub with the trunk open. That will be the only time that I should be able to see my sub.

Honestly, I don't get a lot of rattle this way at all because I don't have my sub volume cranked all the way up. This is what happens when you have your girlfriend in the car who doesn't like the booming of the subs ):

Originally Posted by Altitude ↑
Excellent clean install.

One thing though - velcro ain't gonna hold those things down should you ever (hopefully not) get into an accident. I wouldn't want those heavy ass boxes to go flying and risk slamming you in the back of the head. Mount those things!
Let's just hope that I never get into an accident then 😆 😢

Regardless of any accident, I'm sure my audio equipment would fly around and become a projectile. Now, that's one thing I haven't thought about yet lol.
SurfinYarisSoCal · Feb 28, 2009#10
cool, clean install. 🎉
TEHxFALLEN V1.2Thread starterCalabasas, CA · Feb 28, 2009#11
Thanks SurfinYaris!

Btw, are you new to the forums? Judging by your post count it looks like it.
pennyracergrants pass · Mar 1, 2009#12
here is what i did incase some have not seen this idea ? it works well no trunk space lost
[IMG]Picture not included in this copy[/IMG]


[IMG]Picture not included in this copy[/IMG]
TEHxFALLEN V1.2Thread starterCalabasas, CA · Mar 1, 2009#13
^ Now that is hella clean!!

That is very clever Pennyracer.
CpKi1g3Moreno Valley, CA · Mar 1, 2009#14
that is clean Pennyracer and TEHxFALLEN V1.2!!!
pennyracergrants pass · Mar 1, 2009#15
thank you i went to high school in your town many years ago i still visit perris ca about six times a year i was down there for all three supercross races in anaheim last month
TEHxFALLEN V1.2Thread starterCalabasas, CA · Mar 1, 2009#16
That's cool! That must be some drive from where you are
pennyracergrants pass · Mar 1, 2009#17
thank you TEHxFALLEN V1.2
yes about 800 miles each way
808_YarisHI · Mar 1, 2009#18
nice setup! how are you going to cover your sub and amp?
TEHxFALLEN V1.2Thread starterCalabasas, CA · Mar 1, 2009#19
Well, you know how the rear seats conceal the trunk cargo area? I'm thinking of a nice and subtle alternative to that. Maybe a board of CF would be nice, lightweight addition.
808_YarisHI · Mar 1, 2009#20
haha go for it CF FTW
justjesusOrange County · Mar 3, 2009#21
Originally Posted by TEHxFALLEN V1.2 ↑
Thanks SurfinYaris!

Btw, are you new to the forums? Judging by your post count it looks like it.
GOOD JOB, JR ! ! I'm digging your work on this. (And I wasn't gonna flame you about that harness, but WAS gonna PM you).
On a honda forum, I once went like 2.5 years before making my first post!


This is pretty damn clean. My friend's CRX has similar looking setup. I like it. Shoot, maybe I will install sounds in mine after all. 🙂 Thanks for the ideas guys

Originally Posted by pennyracer ↑
here is what i did incase some have not seen this idea ? it works well no trunk space lost
[IMG]Picture not included in this copy[/IMG]
Sodium DuckWestern Mass. · Mar 3, 2009#22
Fallen, is that a 10", it has to be... where'd you get your box for it?
Sodium DuckWestern Mass. · Mar 3, 2009#23
Oh, and does the cover hit the top at all when you open up the hatch?
TEHxFALLEN V1.2Thread starterCalabasas, CA · Mar 3, 2009#24
Originally Posted by justjesus ↑
GOOD JOB, JR ! ! I'm digging your work on this. (And I wasn't gonna flame you about that harness, but WAS gonna PM you).
On a honda forum, I once went like 2.5 years before making my first post!


This is pretty damn clean. My friend's CRX has similar looking setup. I like it. Shoot, maybe I will install sounds in mine after all. 🙂 Thanks for the ideas guys
Thank you! Although, I'm totally diggin' pennyracer's setup!!

I was sure someone was thinking about my harness mounting point. It's just there 'cause it looks cool for now, till I can use it lol.

Originally Posted by Sodium Duck ↑
Fallen, is that a 10", it has to be... where'd you get your box for it?
Yes sir! This is a 10" sub and an enclosure that I purchased from Safe and Sound, which is a local car audio shop here in my area.


Originally Posted by Sodium Duck ↑
Oh, and does the cover hit the top at all when you open up the hatch?
The box doesn't obstruct the cover from moving freely 👍