ArkhangelOriginal postPuerto Rico · Feb 27, 2009#1Hey peeps, Drove a Mazda 3 Turbo today and well 🙇
Fell in love, been looking around the forum and seen that adding a Turbo the Yaris is pulling 160-180Hp, i think thats awesome consifering its 106Hp Factory
So im interested in the upgrade
Seen some kits Zage, Saw something on ebay
http://cgi.ebay.com/Toyota-Yaris-1NZ...3286.m63.l1177 Im pretty sure were talking about $2000 + investment here, im interested in hopefully just boosting the stock engine and (for now) something "simple" and tame, I dont Race, just liked the feel of when the turbo kits in :D
Suggestion, recommendation, a point in the right direction.
Main idea is a budget turbo kit(if that makes any sense)
Pros and Cons(if any)
whats needed
and what not to do
Replies 42
TamagoOff Grid · Feb 27, 2009#2ArkhangelThread starterPuerto Rico · Feb 27, 2009#3Well with no access, to shop like yours and no experience manufacturing, im gonna have to get things made, so thats $$
unless you or anyone lol wants to donate they time
I like your system, you places the CAI in a spot ive been thinking of using, like the intercooler on top, i would like something like that so you cant tell its a turbo until i drive it :D good ideas Thanx man
TamagoOff Grid · Feb 27, 2009#4i'll sell you my complete setup for $800. you'll have to slightly modify it though to make it fit your yaris.
ArkhangelThread starterPuerto Rico · Feb 27, 2009#5Ahhhh Got to wait till Tax Refund comes in :(
ArkhangelThread starterPuerto Rico · Feb 27, 2009#6Apart from the Turbo, Piping, intercooler, waste gate(correct me if im wrong) what else is needed?
Do I NEED to change injectors, tune the ECU?
TamagoOff Grid · Feb 27, 2009#7 Originally Posted by
Arkhangel ↑ Apart from the Turbo, Piping, intercooler, waste gate(correct me if im wrong) what else is needed?
Do I NEED to change injectors, tune the ECU?
tuning will not be my department, as we have different ECU protocols
if you run my kit, it will include tC injectors.
ArkhangelThread starterPuerto Rico · Feb 27, 2009#8Should i also be looking at a new Exhaust? i was thinking of getting the Nitto(before i wanted turbo) will it work well?
My Car is completely stock, with the exception of a K&N Drop in filter
Why you giving up your kit Tamago?
CASTREXCosta Rica · Feb 27, 2009#10Dude!! You are from Puerto Rico... AKA The land of the custom turbo kits!!
And you are asking here???
You should be telling us all how is done! 😛
There are a bunch of turbo 1NZ's over there... you should start looking there instead of here!
TamagoOff Grid · Feb 27, 2009#11 Originally Posted by
Yoda ↑ Why you giving up your kit Tamago?
going for more power in 2010.. at least 400whp
CASTREXCosta Rica · Feb 27, 2009#12 Originally Posted by
Tamago ↑ going for more power in 2010.. at least 400whp
On the xA ???? 😕
TamagoOff Grid · Feb 27, 2009#13 Originally Posted by
CASTREX ↑ On the xA ???? 😕
yup
CASTREXCosta Rica · Feb 27, 2009#14do I smell a RWD conversion on the way?
I just don't see you persuing such a hefty goal on a FWD...
I guess it won't be 1NZ powered either. 😁
👍
ArkhangelThread starterPuerto Rico · Feb 27, 2009#15 Originally Posted by
CASTREX ↑ Dude!! You are from Puerto Rico... AKA The land of the custom turbo kits!!
And you are asking here???
You should be telling us all how is done! 😛
There are a bunch of turbo 1NZ's over there... you should start looking there instead of here!
Yes i know this but also the land of hustlers, Im trying to get info on what i would need and what would work so i go into it understanding the whole process better..
Look over here they turbo a go cart fine.. a friend has a WRX and recently spent a ton of cash to put in a Turbo.. after 3 months the turbo was done 😲
The Car never worked well he had to take the turbo out , he didnt know what he was getting into and the guys that did the job didnt give a rats ass
i wanna research on how its done whats needed and what i should expect from the finished job.
This is a Yaris Forum who better to ask 👍
TamagoOff Grid · Feb 27, 2009#16 Originally Posted by
CASTREX ↑ do I smell a RWD conversion on the way?
I just don't see you persuing such a hefty goal on a FWD...
I guess it won't be 1NZ powered either. 😁
👍
yes!
nope
nope, sure won't!
Nexus1155Dorchester · Feb 27, 2009#17I can see Tamago being the one to do the 2zz turbo and make it happen, or 4AG, hopefully the ze i like that one
TamagoOff Grid · Feb 27, 2009#18 Originally Posted by
Nexus1155 ↑ I can see Tamago being the one to do the 2zz turbo and make it happen, or 4AG, hopefully the ze i like that one
400whp from a 2zz or 4agTe is pushing it.. i'll be using something with a little bit bigger displacement
Nexus1155Dorchester · Feb 27, 2009#19will it still be Toyota? please don't be sacreligious
CASTREXCosta Rica · Feb 27, 2009#20for 400 whp... I say is a 3Sgte
With the rear end of an AWD Celica...
... better yet, a mid ship set up with MR2 rear end.
It would be MR-X 🤣
TamagoOff Grid · Feb 27, 2009#21 Originally Posted by
Nexus1155 ↑ will it still be Toyota? please don't be sacreligious
absolutely
Originally Posted by
CASTREX ↑ for 400 whp... I say is a 3Sgte
With the rear end of an AWD Celica...
... better yet, a mid ship set up with MR2 rear end.
It would be MR-X 🤣
think 3.5L V6 MR :)
ArkhangelThread starterPuerto Rico · Feb 27, 2009#22😛
Tamago hijacked my Thread lol
No Serious Awesome dude :D🎉🤘
ArkhangelThread starterPuerto Rico · Feb 27, 2009#23Can Anyone Chime in some info?
TamagoOff Grid · Feb 28, 2009#24what do you want to know?
how to do it right?
or how do do it like i did? (cheap)
ArkhangelThread starterPuerto Rico · Feb 28, 2009#25 Originally Posted by
Arkhangel ↑
Main idea is a budget turbo kit(if that makes any sense)
Pros and Cons(if any)
whats needed
and what not to do
^
ArkhangelThread starterPuerto Rico · Feb 28, 2009#26 Originally Posted by arthurtoo ↑
hey Arkhangel,
since this thread is about what's needed to turbocharge the yaris, hope you won't mind if i have a few questions as well instead of opening a new thread? let me know if it's not ok and i'll remove the post.
Tamago,
where does the turbine oil return line goes to? did you fabricate a nipple at the oil sump? i know i can fit in an adaptor and get the oil feed for the turbine from the oil pressure sensor.
No Worries hopefully i get some answers
TamagoOff Grid · Feb 28, 2009#27i welded a -8 jic fitting to the oil pan for my return line.
ArkhangelThread starterPuerto Rico · Feb 28, 2009#28TamagoOff Grid · Feb 28, 2009#29skip the intercooler for low boost, or use something from a saab or VW. huge intercooler just hurts turbo spool performance.
or run water/meth injection to supplement the lack of an intercooler
ArkhangelThread starterPuerto Rico · Mar 1, 2009#30 Originally Posted by
Tamago ↑ skip the intercooler for low boost, or use something from a saab or VW. huge intercooler just hurts turbo spool performance.
or run water/meth injection to supplement the lack of an intercooler
look it up just like that or any specific size?
cali yarisCanoga Park, CA · Mar 1, 2009#31T4 for low boost? Sounds like a mismatch to me.
ArkhangelThread starterPuerto Rico · Mar 1, 2009#32 Originally Posted by
cali yaris ↑ T4 for low boost? Sounds like a mismatch to me.
Well thats why i opened this thread looking for whats needed for my particular application
What would you recommend?
what should i be looking for?
TamagoOff Grid · Mar 1, 2009#33 Originally Posted by
cali yaris ↑ T4 for low boost? Sounds like a mismatch to me.
nobody said anything about a T4
ArkhangelThread starterPuerto Rico · Mar 1, 2009#34 Originally Posted by
Arkhangel ↑
i posted this
YarisPRMayaWest, Puerto Rico · Mar 1, 2009#35 Originally Posted by
Arkhangel ↑ i posted this
Ya t estás dañando!!!! jajaja. Busca info de los Echo/Xa/Xb es bn bn parecido. Eres del área metro? Allá t pueden ayudar mucho más, pero tienes razon hay demasiado gansos!!!
And back to English LOL...
You should keep searching for the people to do the work. Getting the parts well it's easy but who will do it is another thing.. (tamago doesn't live here in PR and neither does garm; cali yaris) LOL!! 😁
TamagoOff Grid · Mar 1, 2009#36 Originally Posted by
Arkhangel ↑ i posted this
sorry, i read td04, my mistake lol
yes, a T04 (T4 for cali) is a little big.
ParmasML · Mar 1, 2009#37Hey Arkhangel you should use a T15 turbo (used on stock Toyota Startlet Glanza). Regarding intercooler you should use a top mount one also like the glanza, it will reduce costs of piping.
Just to add, I don't recommend boosting the yaris with stock internals even at low boost. One tried to boost like you want and bent a rod within days. Also make used to engine check lights and codes etc... Although I wish u good luck for your project, If you want some serious driving buy a car made for it or else prepare some money to beef it up!
ArkhangelThread starterPuerto Rico · Mar 1, 2009#38 Originally Posted by
Parmas ↑ Hey Arkhangel you should use a T15 turbo (used on stock Toyota Startlet Glanza). Regarding intercooler you should use a top mount one also like the glanza, it will reduce costs of piping.
Just to add, I don't recommend boosting the yaris with stock internals even at low boost. One tried to boost like you want and bent a rod within days. Also make used to engine check lights and codes etc... Although I wish u good luck for your project, If you want some serious driving buy a car made for it or else prepare some money to beef it up!
🙁
that kinda killed the whole thing
ok what would be the minimal of things needed to do a low boost set up?
ParmasML · Mar 2, 2009#39 Originally Posted by
Arkhangel ↑ 🙁
that kinda killed the whole thing
ok what would be the minimal of things needed to do a low boost set up?
- Starlet Glanza Top mount intercooler
- Glanza Stock Turbo (T15 size) with internal wastegate
- Upgraded MAF sensor
- Turbo Exhaust mainfold, preferably equal length, custom made for your turbo in discussion
- Custom piping
- Exhaust upgrade without cat for good performance
- Low cost bov
ArkhangelThread starterPuerto Rico · Mar 2, 2009#40 Originally Posted by
Parmas ↑ - Starlet Glanza Top mount intercooler
- Glanza Stock Turbo (T15 size) with internal wastegate
- Upgraded MAF sensor
- Turbo Exhaust mainfold, preferably equal length, custom made for your turbo in discussion
- Custom piping
- Exhaust upgrade without cat for good performance
- Low cost bov
Awesome now just to find Starlet Glanza parts lol never heard of that car
TamagoOff Grid · Mar 2, 2009#41 Originally Posted by
Arkhangel ↑ Awesome now just to find Starlet Glanza parts lol never heard of that car
4EFTE
ebay
they're cheap as hell
i considered building one for the xA but it still won't be as quick as a different engine.
1.3L Turbo, high revving, but torqueless wonder.
ArkhangelThread starterPuerto Rico · Mar 2, 2009#42 Originally Posted by
Parmas ↑ - Starlet Glanza Top mount intercooler
- Glanza Stock Turbo (T15 size) with internal wastegate
- Upgraded MAF sensor
- Turbo Exhaust mainfold, preferably equal length, custom made for your turbo in discussion
- Custom piping
- Exhaust upgrade without cat for good performance
- Low cost bov
Well ive found the Turbo pretty cheap
http://cgi.ebay.com/ebaymotors/T15-T...Q5fAccessories for $222 Shipped
Cant seem to find the Glanza IC though
TamagoOff Grid · Mar 2, 2009#43 Originally Posted by
Arkhangel ↑
that's a lot of money for an ebay turbo IMO
and as stated before, you don't want a tiny glanza intercooler. source one from a saab, mr2, or VW