BrianOriginal postRiverside, CA · Feb 24, 2009#1I got my wheels installed today but the center caps won't go on the
front wheels. My wheels are SSR Type C 16x7 +42. Anyone else have
this problem with the inside of the center cap hitting the threads? Here's
some pics so you can see what I'm talking about.
2 attachments not included in this copy
Replies 7
cali yarisCanoga Park, CA · Feb 24, 2009#2I'm checking with Tanabe -- maybe the design of the center caps has changed or something. I know I have pics of my car with the center caps on, and they fit on PeterPoop's car too.
I don't think the front axles are different for the sedan -- anyone know?
CTScottUSA, CT · Feb 24, 2009#3 Originally Posted by
cali yaris ↑ I'm checking with Tanabe -- maybe the design of the center caps has changed or something. I know I have pics of my car with the center caps on, and they fit on PeterPoop's car too.
I don't think the front axles are different for the sedan -- anyone know?
Same part numbers for axles and hubs on LB and Sedan.
TamagoOff Grid · Feb 24, 2009#4very common toyota issue, the axle stubs stick out too far... grind them off and you should be ok.
ghetto style,paint can lids.
2 attachments not included in this copy
BrianThread starterRiverside, CA · Feb 24, 2009#6 Originally Posted by
Tamago ↑ very common toyota issue, the axle stubs stick out too far... grind them off and you should be ok.
Thanks. I wasn't sure if I should do it or not. It's not sticking out by too much. Probably about 3/16".
TamagoOff Grid · Feb 25, 2009#7 Originally Posted by
Brian ↑ Thanks. I wasn't sure if I should do it or not. It's not sticking out by too much. Probably about 3/16".
yeah you should be able to use a 4" grinder on them, no problem. just use light pressure on the edges to avoid "mushrooming" the thread area. if and when you have to remove the axle, spinning the nut backwards off the stub will straighten out any minor thread imperfections.
make sure and shoot the stub with a lil paint after grinding. rust sucks :(
Klink10910 · Feb 25, 2009#8 Originally Posted by
kou ↑ ghetto style,paint can lids.
Very nice solution....cheap and easy to replace. I like