Yarisworld Archive

Exhaust help......

17 posts · 3,912 views

djgab101Original postaustralia · Feb 21, 2009#1
I have 2.5inch free flow exhaust with two exhaust tips .....

but since i have installed the exhaust my dam engine light has keep on coming on..... every time i take it for service they reset something that turns off the light but after 10min of driving it comes back on....

How can i get rid of the engine light????

1 attachment not included in this copy

Replies 16

Kaotic LazagnaCentral Valley, CA · Feb 21, 2009#2
Possible exhaust leak somewhere????
djgab101Thread starteraustralia · Feb 21, 2009#3
Originally Posted by Kaotic Lazagna ↑
Possible exhaust leak somewhere????
naa the exhaust has been properly made and i have looked and seen no leaks......
Kaotic LazagnaCentral Valley, CA · Feb 21, 2009#4
Easiest way to see what the problem is then, is to get an OBD reader and see what the code it pulls out is.
djgab101Thread starteraustralia · Feb 21, 2009#5
Originally Posted by Kaotic Lazagna ↑
Easiest way to see what the problem is then, is to get an OBD reader and see what the code it pulls out is.
sorry i dont much about these things but wtf is a OBD reader??? 🤷
Kaotic LazagnaCentral Valley, CA · Feb 21, 2009#6
It's a device that plugs into a port (not sure where on the Yaris it is since I haven't had the need to hook it up to one yet) that will read what the car's computer is saying the problem is. It'll come out as a number code, which you can then post here if you can't find it online.

For example, my GTI threw a code saying that there was carbon build up in the intake, which was what was causing the CEL.
JerkrattFair Lawn, NJ · Feb 22, 2009#7
ill have a picture of where it is tomorrow guaranteed. i got no work tomorrow so ill have time on my hands... + i gotta do some work with the BMW side markers
1NZYaris1New Zealand · Feb 22, 2009#8
did they re install the sensor by the cat , thats more than likely the cause of your cel,
it's eithier not installed or it is getting to much excuast gases arrond it .
there was a couple of threads on here about
it before the hack of 2008, i beleave Cali yaris (Grarm - Micro image) has the part for sale to fix the problem .
Or if you are lucky someone else who has done this will forward you the infoon how to make the part required.
CtrlAltDefeatIndianapolis IN · Feb 22, 2009#9
Originally Posted by djgab101 ↑
sorry i dont much about these things but wtf is a OBD reader??? 🤷
When I got a CEL I took it to the local Autozone (national car part store) and they had the reader and were able to hook it up and tell me what the error was. Don't know if they have Autozone or Advanced Autoparts there...
cali yarisCanoga Park, CA · Feb 22, 2009#10
Doesn't he just need an anti-fouler for the O2 sensor?

You can reset the CEL by disconnecting the battery for a few seconds. That does not tell you what's going on, though!

http://shop.microimageonline.com/pro...9&productId=70

Picture not included in this copy
1NZYaris1New Zealand · Feb 22, 2009#11
Originally Posted by cali yaris ↑
Doesn't he just need an anti-fouler for the O2 sensor?

You can reset the CEL by disconnecting the battery for a few seconds. That does not tell you what's going on, though!

http://shop.microimageonline.com/pro...9&productId=70

Picture not included in this copy
😁 You the man , See i told you Garm had your solution 😆
could not remember for the life of me what it was called last night.👏👏👏
JerkrattFair Lawn, NJ · Feb 22, 2009#12
i got mine but have yet to put it in cause its been cold
whooppee777Maryland · Feb 22, 2009#13
Originally Posted by cali yaris ↑
Doesn't he just need an anti-fouler for the O2 sensor?

You can reset the CEL by disconnecting the battery for a few seconds. That does not tell you what's going on, though!

http://shop.microimageonline.com/pro...9&productId=70

Picture not included in this copy
it works have one on my car. light wont go away immediately but it will after u drive it a little bit
djgab101Thread starteraustralia · Feb 23, 2009#14
Originally Posted by cali yaris ↑
Doesn't he just need an anti-fouler for the O2 sensor?

You can reset the CEL by disconnecting the battery for a few seconds. That does not tell you what's going on, though!

http://shop.microimageonline.com/pro...9&productId=70

Picture not included in this copy

dude ur a legend!!!

so if i took that to the exhaust centre .... would they know wat to do???
ddongbaphay · Feb 23, 2009#15
How-to-tricky-the-o2-sensor.com
cali yarisCanoga Park, CA · Feb 23, 2009#16
so if i took that to the exhaust centre .... would they know wat to do???
If they don't, they don't know what they're doing, it's just an extender for the O2 sensor.
djgab101Thread starteraustralia · Feb 23, 2009#17
Originally Posted by cali yaris ↑
If they don't, they don't know what they're doing, it's just an extender for the O2 sensor.
lol okay ....... thanks for the help 👍