My next mod for my Yaris might be the TRD muffler, I wouldn't get it til the end of spring. Doing the planning now, so I know how much to save up. I know I can get one from sparks for $305, is that a good price? or is there better muffler's then TRD? What is the average cost to install a axle back exhaust?
Trd muffler ?
27 posts · 8,470 views
Replies 26
I have a Nitto exhaust (brand new for $230ish from Micro Image) and I love it. Installation; you can definitely do yourself. It's like 2 bolts right under the rear of the car.
Or if you want to drive here, I'll do it for free. We're even having a meet in March (check my sig), I could do it then in the parking lot.
Picture not included in this copy
Or if you want to drive here, I'll do it for free. We're even having a meet in March (check my sig), I could do it then in the parking lot.
Picture not included in this copy
i dig the TRD, but it is NOT quiet... around 2200rpm on a LB it gets a bit boomy...
i've been rocking it for less than a month now... if you wanted to buy me a similar muffler and drive to upstate NY, i'd do a swap with you real quick :)
i've been rocking it for less than a month now... if you wanted to buy me a similar muffler and drive to upstate NY, i'd do a swap with you real quick :)
I prefer the Tanabe Medallion if you are looking for an axle back.
Excellent quality, fit and sound. Easy bolt-on installation. Get it from Garm. 😉
Picture not included in this copy
Excellent quality, fit and sound. Easy bolt-on installation. Get it from Garm. 😉
Picture not included in this copy
I'm ready to get an aftermarket muffler ,it's between these two TRD muffler and the Tanabe Medallion touring muffler which is better, but here's my question about how much will I be charged to get installed at a muffler shop, I just need a ballpark amount that they will charge?
honestly, it takes a "first timer" about 15 minutes to do this. A pro will take maybe 10. If they want to charge you more than $20 bucks I'd go somewhere else. Its seriously that easy.
It is a bolt-on job with the Tanabe Medallion axle back. Should take no more than 15 minutes max. Never did a TRD one, so I can't comment.
TRD is the same, an axleback. Two bolts and two rubber hangers, thats all she wrote.
I set up my power tools with the right socket and had a friend help me back when I put the Medalion Touring on my car. I wish I had a video of it - 4 mins 28 secs.
haha see?
On a small car like the Yaris, install is very simple! Axle back or even cat back should take you no longer than 20 minutes or for first timers no more than 30 minutes.
In my opinion I would look up both on YouTube and see if videos are available to hear the sound difference. Then make your choice on which sound you like!
Tim
In my opinion I would look up both on YouTube and see if videos are available to hear the sound difference. Then make your choice on which sound you like!
Tim
Cutie Pie #2, come on...just do it! 👍
Does anybody have links for the performance results of the various exhausts? From listening to sound clips I liked the sound of the Thunder and Tanabe exhausts but I'm wondering what performance advantages they offer if any?
Don't do it. The noise inside the car is unbearable. I'm still looking for a quieter exhaust.
Listen 50 sec. into the video.
http://www.youtube.com/watch?v=05RZSyraA5Y
Listen 50 sec. into the video.
http://www.youtube.com/watch?v=05RZSyraA5Y
I have the trd exhaust on my car.
It didn't take very long to install at all, about 10 minutes, and I enjoy it quite a bit. It is a tad loud, but if you know how to drive normally its not too much more than a low rumble when you're inside the car. Its not high pitched (something I was trying to avoid) and doesn't look like a huge watermelon-cannon strapped to the back of your car. On the highway, its a steady, mellow sound that I've found quite soothing. Granted, I'm used to driving around in a friend's wrx with a pro-drive exhaust (deeper and more rumble to it) but I like it all the same.
As for performance gains, I'll say that they are slim to none right now. The exhaust is the first of a few things I'll be doing to my car, including mid pipe, headers, and cai, but I got it at a great price from another yarisworld member, so I couldn't pass it up!
It didn't take very long to install at all, about 10 minutes, and I enjoy it quite a bit. It is a tad loud, but if you know how to drive normally its not too much more than a low rumble when you're inside the car. Its not high pitched (something I was trying to avoid) and doesn't look like a huge watermelon-cannon strapped to the back of your car. On the highway, its a steady, mellow sound that I've found quite soothing. Granted, I'm used to driving around in a friend's wrx with a pro-drive exhaust (deeper and more rumble to it) but I like it all the same.
As for performance gains, I'll say that they are slim to none right now. The exhaust is the first of a few things I'll be doing to my car, including mid pipe, headers, and cai, but I got it at a great price from another yarisworld member, so I couldn't pass it up!
If you can find the V. S TRD muffler, it's not loud and on the dyno adds just over 2hp. It's the JDM version, so good luck finding it. I just sold mine used for $350.
TRD Axle-back installation.
Completed in the driveway while the wifey cooked dinner. 20 minutes max. including dragging the tools from the basement and the clean-up afterward.
Two bolts on the flange, two rubber hangers. A straight remove and replace. One ratchet and socket (or a spanner). It's a no-brainer.
Completed in the driveway while the wifey cooked dinner. 20 minutes max. including dragging the tools from the basement and the clean-up afterward.
Two bolts on the flange, two rubber hangers. A straight remove and replace. One ratchet and socket (or a spanner). It's a no-brainer.
unfortunately you have the newer TRD version which is considerably louder than the JDM one it replaced......Originally Posted by LtNoogie ↑Don't do it. The noise inside the car is unbearable. I'm still looking for a quieter exhaust.
Listen 50 sec. into the video.
http://www.youtube.com/watch?v=05RZSyraA5Y
So far the quietest and deepest tone has come from the Megan Racing exhaust, which isnt the prettiest thing... and the Fujitsubo Wagolis. One being cheap, the other being super expensive.
I plan to have my Megan exhaust for sale in a couple months, once my 2.25'' exhaust is completed.
I plan to have my Megan exhaust for sale in a couple months, once my 2.25'' exhaust is completed.
^^ QUIET AND DEEPEST TONE from the megan setup? i have to disagree with that one. i hate megan anything and feel my my jdm trd looks stock and it doesn't really start to open up until after 60 mph.
Is this the JDM version you guys are talking about?
http://www.rhdjapan.com/jdm-low/TRD-...arlet-bB-51962
http://www.rhdjapan.com/jdm-low/TRD-...arlet-bB-51962
top right is what we're talking about....
In looking at it again, they don't specify which of those nine you're actually getting...
have to agree that the megan sounds the best/deepest. Unfortunately it is fairly heavy and likes to shift around sometimes.
Picture not included in this copy
Well if you compare the JDM TRD and the Megan they dont compare at all, were talking about a stock looking muffler with awesome tone.
Compared to Greddy, HKS, and even I dare say Tanabe, it has a better sound... at least to me, some people like a bit of rasp with their exhaust. But I'd rather not get noticed all the time for my exhaust.
Compared to Greddy, HKS, and even I dare say Tanabe, it has a better sound... at least to me, some people like a bit of rasp with their exhaust. But I'd rather not get noticed all the time for my exhaust.
x2